1 |
> > Which version of madwifi-ng are you using? |
2 |
> |
3 |
> 0.9.3.3 |
4 |
> > What does it say in dmesg? |
5 |
> |
6 |
> ath_hal: module license 'Proprietary' taints kernel. |
7 |
> ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) |
8 |
> wlan: 0.8.4.2 (0.9.3.3) |
9 |
> ath_pci: 0.9.4.5 (0.9.3.3) |
10 |
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 |
11 |
> PCI: Setting latency timer of device 0000:02:00.0 to 64 |
12 |
> ath_rate_sample: 1.2 (0.9.3.3) |
13 |
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps |
14 |
> wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps |
15 |
> 24Mbps 36Mbps 48Mbps 54Mbps |
16 |
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP |
17 |
> wifi0: mac 10.0 phy 6.1 radio 10.2 |
18 |
> wifi0: Use hw queue 1 for WME_AC_BE traffic |
19 |
> wifi0: Use hw queue 0 for WME_AC_BK traffic |
20 |
> wifi0: Use hw queue 2 for WME_AC_VI traffic |
21 |
> wifi0: Use hw queue 3 for WME_AC_VO traffic |
22 |
> wifi0: Use hw queue 8 for CAB traffic |
23 |
> wifi0: Use hw queue 9 for beacons |
24 |
> wifi0: Atheros 5424/2424: mem=0xca800000, irq=24 |
25 |
> |
26 |
> > Is your card built into a laptop? |
27 |
> |
28 |
> Yes. |
29 |
> |
30 |
> > If so, which brand? |
31 |
> |
32 |
> It's made by Evesham Micros, a UK company, based on a Mitac chassis. |
33 |
|
34 |
Thanks Neil. This Acer one must be different. |
35 |
|
36 |
- Grant |
37 |
-- |
38 |
gentoo-user@g.o mailing list |