1 |
>> I'm testing this USB 3.0 bus-powered hard drive: |
2 |
>> |
3 |
>> http://www.amazon.com/gp/product/B0041OSQ9S |
4 |
>> |
5 |
>> and I get: |
6 |
>> |
7 |
>> # hdparm -tT /dev/sdb |
8 |
>> /dev/sdb: |
9 |
>> Timing cached reads: 8006 MB in 2.00 seconds = 4004.33 MB/sec |
10 |
>> Timing buffered disk reads: 252 MB in 3.01 seconds = 83.63 MB/sec |
11 |
>> |
12 |
>> # hdparm -tT /dev/sdb |
13 |
>> /dev/sdb: |
14 |
>> Timing cached reads: 8230 MB in 2.00 seconds = 4116.54 MB/sec |
15 |
>> Timing buffered disk reads: 252 MB in 3.02 seconds = 83.55 MB/sec |
16 |
>> |
17 |
>> # hdparm -tT /dev/sdb |
18 |
>> /dev/sdb: |
19 |
>> Timing cached reads: 8446 MB in 2.00 seconds = 4224.36 MB/sec |
20 |
>> Timing buffered disk reads: 230 MB in 3.02 seconds = 76.28 MB/sec |
21 |
>> |
22 |
>> Wikipedia says USB 3.0 has transmission speeds of up to 5 Gbit/s. |
23 |
>> Doesn't MB/sec denote mega*bytes* per second? |
24 |
> What usb3 is supported by Linux? Is it a pci card? |
25 |
|
26 |
I'm on 2.6.39-hardened-r10 and I'm using this motherboard with onboard USB 3.0: |
27 |
|
28 |
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128490 |
29 |
|
30 |
- Grant |