1 |
That appears to be a testing version of udev. Do you always run testing? |
2 |
|
3 |
As for the mixer message please try removing /etc/asound.state and |
4 |
then restarting Alsa. You will probably need to set mixer levels using |
5 |
alsamixer or whatever mixer is appropriate for this device. |
6 |
|
7 |
Good luck, |
8 |
Mark |
9 |
|
10 |
On 12/17/06, Arend von der Lieth <lieth@×××××××××××.de> wrote: |
11 |
> Hi all, |
12 |
> |
13 |
> After upgrading to udev-103 I had some problems with mouse and sound. While |
14 |
> I was able to fix the first issue myself, I am now stuck in the sound |
15 |
> problem: |
16 |
> I followed the gentoo alsa guide, checked all settings in the kernel, even |
17 |
> upgraded the kernel from 2.6.15 to 2.6.18 (hoping that this would help, but |
18 |
> still no success). Now, I guess that it's a problem with missing device |
19 |
> nodes (the directories snd/ or sound/ do not exist in /dev). When running |
20 |
> alsaconf I get the following error message (which is the same during boot): |
21 |
> |
22 |
> Running modules-update... |
23 |
> Loading driver... |
24 |
> * Loading ALSA modules ... |
25 |
> * Loading: snd-card-0 ... [ ok ] |
26 |
> * Loading: snd-seq-oss ... [ ok ] |
27 |
> * Loading: snd-pcm-oss ... [ ok ] |
28 |
> * Loading: snd-emu10k1-synth ... [ ok ] |
29 |
> * Loading: snd-seq-midi ... [ ok ] |
30 |
> * Restoring Mixer Levels ... |
31 |
> /usr/sbin/alsactl: load_state:1341: Cannot find soundcard '0'... |
32 |
> * Errors while restoring defaults, ignoring [ ok ] |
33 |
> Setting default volumes... |
34 |
> amixer: Mixer attach default error: No such device |
35 |
> |
36 |
> "cat /proc/asound/cards" yields: |
37 |
> 0 [Live ]: EMU10K1 - SBLive! Value [CT4780] |
38 |
> SBLive! Value [CT4780] (rev.10, serial:0x80221102) at |
39 |
> 0xece0, irq 201 |
40 |
> |
41 |
> "lsmod | grep snd" returns: |
42 |
> |
43 |
> snd_seq_midi 8864 0 |
44 |
> snd_emu10k1_synth 7552 0 |
45 |
> snd_emux_synth 33664 1 snd_emu10k1_synth |
46 |
> snd_seq_virmidi 6912 1 snd_emux_synth |
47 |
> snd_seq_midi_emul 6912 1 snd_emux_synth |
48 |
> snd_pcm_oss 42784 0 |
49 |
> snd_mixer_oss 16896 1 snd_pcm_oss |
50 |
> snd_seq_dummy 3972 0 |
51 |
> snd_seq_oss 31872 0 |
52 |
> snd_seq_midi_event 7168 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss |
53 |
> snd_seq 47568 9 snd_seq_midi,snd_emux_synth,snd_seq_virmidi, |
54 |
> snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss, |
55 |
> snd_seq_midi_event |
56 |
> snd_emu10k1 118592 1 snd_emu10k1_synth |
57 |
> snd_rawmidi 23840 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1 |
58 |
> snd_ac97_codec 92320 1 snd_emu10k1 |
59 |
> snd_ac97_bus 2432 1 snd_ac97_codec |
60 |
> snd_pcm 74248 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec |
61 |
> snd_seq_device 8332 8 snd_seq_midi,snd_emu10k1_synth, |
62 |
> snd_emux_synth,snd_seq_dummy,snd_seq_oss, |
63 |
> snd_seq,snd_emu10k1,snd_rawmidi |
64 |
> snd_timer 22020 3 snd_seq,snd_emu10k1,snd_pcm |
65 |
> snd_page_alloc 10376 2 snd_emu10k1,snd_pcm |
66 |
> snd_util_mem 4992 2 snd_emux_synth,snd_emu10k1 |
67 |
> snd_hwdep 9348 2 snd_emux_synth,snd_emu10k1 |
68 |
> snd 49636 13 snd_emux_synth,snd_seq_virmidi,snd_pcm_oss, |
69 |
> snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1, |
70 |
> snd_rawmidi,snd_ac97_codec,snd_pcm, |
71 |
> snd_seq_device,snd_timer,snd_hwdep |
72 |
> soundcore 9568 1 snd |
73 |
> |
74 |
> Can anybody point me to the right direction where I should look at? |
75 |
> |
76 |
> Thanks in advance, |
77 |
> Arend |
78 |
> -- |
79 |
> gentoo-user@g.o mailing list |
80 |
> |
81 |
> |
82 |
-- |
83 |
gentoo-user@g.o mailing list |