1 |
I had this problem, or at least something similar. My solution (and this isn't specific instructions) was to boot from the CentOS "Everything" disc, and from there I could get a grub prompt, which would allow me to boot the system, which then from there I installed grub. I think I ended up going through a few itterations before I got it booting correctly from the SSD, but in the end I got there. |
2 |
|
3 |
On 2017-08-14 20:32, symack wrote: |
4 |
> Hello Everyone, |
5 |
> |
6 |
> New installation on an older x346 system that has a HW raid serveraid7k. |
7 |
> I have the appropriate kernel driver compiled `aic79xx`. |
8 |
> |
9 |
> lscpi: |
10 |
> |
11 |
> 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) |
12 |
> 00:00.1 Unassigned class [ff00]: Intel Corporation E7525/E7520 Error |
13 |
> Reporting Registers (rev 0c) |
14 |
> 00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port |
15 |
> A (rev 0c) |
16 |
> 00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B |
17 |
> (rev 0c) |
18 |
> 00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 0c) |
19 |
> 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c) |
20 |
> 00:08.0 System peripheral: Intel Corporation E7525/E7520/E7320 Extended |
21 |
> Configuration Registers (rev 0c) |
22 |
> 00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB |
23 |
> UHCI Controller #1 (rev 02) |
24 |
> 00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB |
25 |
> UHCI Controller #2 (rev 02) |
26 |
> 00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 |
27 |
> EHCI Controller (rev 02) |
28 |
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) |
29 |
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC |
30 |
> Interface Bridge (rev 02) |
31 |
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE |
32 |
> Controller (rev 02) |
33 |
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus |
34 |
> Controller (rev 02) |
35 |
> 01:06.0 VGA compatible controller: Advanced Micro Devices, Inc. |
36 |
> [AMD/ATI] RV100 [Radeon 7000 / Radeon VE] |
37 |
> 02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge |
38 |
> A (rev 09) |
39 |
> 02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge |
40 |
> B (rev 09) |
41 |
> 03:03.0 Network controller: MYRICOM Inc. Myrinet 2000 Scalable Cluster |
42 |
> Interconnect (rev 06) |
43 |
> 05:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5721 Gigabit |
44 |
> Ethernet PCI Express (rev 11) |
45 |
> 06:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5721 Gigabit |
46 |
> Ethernet PCI Express (rev 11) |
47 |
> 07:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor |
48 |
> (A-Segment Bridge) (rev 07) |
49 |
> 07:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor |
50 |
> (B-Segment Bridge) (rev 07) |
51 |
> 08:0e.0 RAID bus controller: Adaptec ServeRAID Controller (rev 07) |
52 |
> |
53 |
> |
54 |
> |
55 |
> emerge --info |
56 |
> |
57 |
> |
58 |
> Portage 2.3.6 (python 3.4.5-final-0, hardened/linux/amd64, gcc-5.4.0, |
59 |
> glibc-2.23-r4, 4.8.17-hardened-r2 x86_64) |
60 |
> ================================================================= |
61 |
> System uname: |
62 |
> Linux-4.8.17-hardened-r2-x86_64-Intel-R-_Xeon-TM-_CPU_3.60GHz-with-gentoo-2.3 |
63 |
> KiB Mem: 8061620 total, 6539044 free |
64 |
> KiB Swap: 0 total, 0 free |
65 |
> Timestamp of repository gentoo: Mon, 07 Aug 2017 15:30:01 +0000 |
66 |
> sh bash 4.3_p48-r1 |
67 |
> ld GNU ld (Gentoo 2.28 p1.2) 2.28 |
68 |
> app-shells/bash: 4.3_p48-r1::gentoo |
69 |
> dev-lang/perl: 5.24.1-r2::gentoo |
70 |
> dev-lang/python: 2.7.12::gentoo, 3.4.5::gentoo |
71 |
> dev-util/pkgconfig: 0.28-r2::gentoo |
72 |
> sys-apps/baselayout: 2.3::gentoo |
73 |
> sys-apps/openrc: 0.28::gentoo |
74 |
> sys-apps/sandbox: 2.10-r3::gentoo |
75 |
> sys-devel/autoconf: 2.69::gentoo |
76 |
> sys-devel/automake: 1.15-r2::gentoo |
77 |
> sys-devel/binutils: 2.28-r2::gentoo |
78 |
> sys-devel/gcc: 5.4.0-r3::gentoo |
79 |
> sys-devel/gcc-config: 1.7.3::gentoo |
80 |
> sys-devel/libtool: 2.4.6-r3::gentoo |
81 |
> sys-devel/make: 4.2.1::gentoo |
82 |
> sys-kernel/linux-headers: 4.4::gentoo (virtual/os-headers) |
83 |
> sys-libs/glibc: 2.23-r4::gentoo |
84 |
> Repositories: |
85 |
> |
86 |
> gentoo |
87 |
> location: /usr/portage |
88 |
> sync-type: rsync |
89 |
> sync-uri: rsync://rsync.gentoo.org/gentoo-portage |
90 |
> <http://rsync.gentoo.org/gentoo-portage> |
91 |
> priority: -1000 |
92 |
> |
93 |
> ACCEPT_KEYWORDS="amd64" |
94 |
> ACCEPT_LICENSE="* -@EULA" |
95 |
> CBUILD="x86_64-pc-linux-gnu" |
96 |
> CFLAGS="-march=core2 -msse4.1 -msse4.2 -mtune=generic -O2 -pipe" |
97 |
> CHOST="x86_64-pc-linux-gnu" |
98 |
> CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc |
99 |
> /usr/share/gnupg/qualified.txt" |
100 |
> CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf |
101 |
> /etc/gentoo-release /etc/sandbox.d /etc/terminfo" |
102 |
> CXXFLAGS="-march=core2 -msse4.1 -msse4.2 -mtune=generic -O2 -pipe" |
103 |
> DISTDIR="/usr/portage/distfiles" |
104 |
> FCFLAGS="-O2 -pipe" |
105 |
> FEATURES="assume-digests binpkg-logs config-protect-if-modified |
106 |
> distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch |
107 |
> preserve-libs protect-owned sandbox sfperms strict unknown-features-warn |
108 |
> unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr" |
109 |
> FFLAGS="-O2 -pipe" |
110 |
> GENTOO_MIRRORS="http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ |
111 |
> ftp://mirror.csclub.uwaterloo.ca/gentoo-distfiles/" |
112 |
> LANG="en_US.utf8" |
113 |
> LDFLAGS="-Wl,-O1 -Wl,--as-needed" |
114 |
> MAKEOPTS="-j2" |
115 |
> PKGDIR="/usr/portage/packages" |
116 |
> PORTAGE_CONFIGROOT="/" |
117 |
> PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times |
118 |
> --omit-dir-times --compress --force --whole-file --delete --stats |
119 |
> --human-readable --timeout=180 --exclude=/distfiles --exclude=/local |
120 |
> --exclude=/packages --exclude=/.git" |
121 |
> PORTAGE_TMPDIR="/var/tmp" |
122 |
> USE="acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dri gdbm |
123 |
> hardened iconv ipv6 justify modules multilib ncurses nls nptl openmp pam |
124 |
> pax_kernel pcre pie readline seccomp session ssl ssp tcpd unicode |
125 |
> urandom xattr xtpax zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 |
126 |
> atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 |
127 |
> es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio |
128 |
> via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core |
129 |
> socache_shmcb unixd actions alias auth_basic authn_alias authn_anon |
130 |
> authn_dbm authn_default authn_file authz_dbm authz_default |
131 |
> authz_groupfile authz_host authz_owner authz_user autoindex cache cgi |
132 |
> cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter |
133 |
> file_cache filter headers include info log_config logio mem_cache mime |
134 |
> mime_magic negotiation rewrite setenvif speling status unique_id userdir |
135 |
> usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets |
136 |
> stage tables krita karbon braindump author" COLLECTD_PLUGINS="df |
137 |
> interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx sse |
138 |
> sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore |
139 |
> fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom |
140 |
> oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 |
141 |
> timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput keyboard |
142 |
> mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 |
143 |
> lb216 lcdm001 mtxorb ncurses text" |
144 |
> LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" |
145 |
> OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" |
146 |
> POSTGRES_TARGETS="postgres9_5" PYTHON_SINGLE_TARGET="python3_4" |
147 |
> PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby21 ruby22" |
148 |
> USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi |
149 |
> vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 |
150 |
> ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq |
151 |
> steal rawnat logmark ipmark dhcpmac delude chaos account" |
152 |
> Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, |
153 |
> LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, |
154 |
> PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON |
155 |
> |
156 |
> |
157 |
> |
158 |
> When I try to mount the partitions outside of chroot everything mounts |
159 |
> fine. Within chroot, I get a "permission denied" when trying to mount. I |
160 |
> am kind of stuck because when trying to install grub, I am getting: |
161 |
> |
162 |
> grub-install /dev/sda |
163 |
> Installing for i386-pc platform. |
164 |
> grub-install: warning: disk does not exist, so falling back to partition |
165 |
> device /dev/sda4. |
166 |
> grub-install: warning: disk does not exist, so falling back to partition |
167 |
> device /dev/sda4. |
168 |
> grub-install: warning: disk does not exist, so falling back to partition |
169 |
> device /dev/sda4. |
170 |
> grub-install: error: disk `hostdisk//dev/sda4' not found. |
171 |
> |
172 |
> |
173 |
> Your help is greatly appreciated. |
174 |
> |
175 |
> Mike |
176 |
|
177 |
-- |
178 |
Jigme Datse Yli-Rasku |
179 |
jigme.datse@×××××××××××××××.com (Preferred address for new messages) |
180 |
|
181 |
Jigme Datse Yli-Rasku |
182 |
PO Box 270 |
183 |
Rossland, BC V0G 1Y0 |
184 |
Canada |
185 |
|
186 |
....................................................................... |
187 |
... This message should be electronically signed, and if the sender ... |
188 |
... has your public key, may also be encrypted. ... |
189 |
... If you have any questions about this, please email, or call. ... |
190 |
....................................................................... |