Gentoo Archives: gentoo-user

From: meino.cramer@×××.de
To: Gentoo <gentoo-user@l.g.o>
Subject: [gentoo-user] Keymap used for bttv (dvbt) ???
Date: Thu, 20 Jan 2011 03:37:02
Message-Id: 20110120033531.GB10615@solfire
1 Hi,
2
3 while searching for these damned hickups with my Avermedia dvb-t card
4 I found this in the kernel log:
5
6 bttv: driver version 0.9.18 loaded
7 bttv: using 8 buffers with 2080k (520 pages) each for capture
8 bttv: Bt8xx card found (0).
9 bttv 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
10 bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 21, latency: 64, mmio: 0xd5fff000
11 bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
12 bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
13 bttv0: gpio: en=00000000, out=00000000 in=00d7710f [init]
14 bttv0: tuner absent
15 bttv0: registered device video0
16 bttv0: registered device vbi0
17 bttv0: PLL: 28636363 => 35468950 .
18 serial 0000:03:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
19 Couldn't register serial port 0000:03:00.1: -28
20 . ok
21 bttv0: add subdevice "dvb0"
22 *** IR keymap rc-avermedia-dvbt not found
23 *** Registered IR keymap rc-empty
24 input: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0/input6
25 rc0: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0
26 bt878: AUDIO driver version 0.0.0 loaded
27 bt878: Bt878 AUDIO function found (0).
28 bt878 0000:01:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
29 bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
30 bt878(0): Bt878 (rev 17) at 01:06.1, irq: 21, latency: 64, memory: 0xd5ffe000
31
32
33 What the heck is this? I have no IR remote control with my dvb-t card
34 ... I am using vlc/mplayer and my keyboard...
35
36 And...if this is missing...where can I get it and what will it cost?
37 ;)
38
39 Best regards,
40 mcc

Replies

Subject Author
Re: [gentoo-user] Keymap used for bttv (dvbt) ??? Daniel Pielmeier <billie@g.o>