1 |
-----BEGIN PGP SIGNED MESSAGE----- |
2 |
Hash: SHA1 |
3 |
|
4 |
On 10/16/2010 01:59 AM, meino.cramer@×××.de wrote: |
5 |
> |
6 |
> Hi, |
7 |
> |
8 |
> I want to record DVB-T broadcast with my (already working) DVB-T card. |
9 |
> Since there are only a couple of broadcasts which should be recorded |
10 |
> I have no problems with editing crontabs to acchieve, what I want :) |
11 |
> |
12 |
> What should work is: |
13 |
> 1) The PC should wake up from suspend-to-ram or (better!) |
14 |
> suspend-to-disk state (suspend-to-* works both already). |
15 |
> 2) Therefore it must be possible to store the wake-up time |
16 |
> somewhere. |
17 |
> 3) The DVBT-card should be set to the correct channel and |
18 |
> it is sufficient to store the whole *.ts-stram to disk |
19 |
> for later processing. |
20 |
> |
21 |
> My PC is a desktop PC with the following hardware (as reported |
22 |
> by lspci): |
23 |
> |
24 |
> 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) |
25 |
> 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) |
26 |
> 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) |
27 |
> 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) |
28 |
> 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) |
29 |
> 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) |
30 |
> 00:0d.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B) |
31 |
> 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (rev 40) |
32 |
> 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller |
33 |
> 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller |
34 |
> 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller |
35 |
> 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller |
36 |
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) |
37 |
> 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40) |
38 |
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) |
39 |
> 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40) |
40 |
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) |
41 |
> 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller |
42 |
> 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller |
43 |
> 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller |
44 |
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration |
45 |
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map |
46 |
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller |
47 |
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control |
48 |
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control |
49 |
> 01:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) |
50 |
> 01:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) |
51 |
> 02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) |
52 |
> 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) |
53 |
> 03:00.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) |
54 |
> 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) |
55 |
> 05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8059 PCI-E Gigabit Ethernet Controller (rev 11) |
56 |
> 06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller |
57 |
> 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) |
58 |
> 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) |
59 |
> 08:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1) |
60 |
> |
61 |
> |
62 |
> I am using a recent gentoo with vanilla kernel 2.6.35.7. |
63 |
> |
64 |
> Thank you very much in advance for any help! |
65 |
> |
66 |
> Best regards and have a nice weekend! :) |
67 |
> mcc |
68 |
> |
69 |
> |
70 |
To get the computer to come out of the suspended states, you need to |
71 |
look for an option in the BIOS to automatically start your PC, typically |
72 |
called RTC Alarm or similar. Your cron jobs will be able to take over at |
73 |
that point. |
74 |
|
75 |
HTH, James |
76 |
|
77 |
- -- |
78 |
No trees were harmed in the sending of this message. However, a large |
79 |
number of electrons were terribly inconvenienced. |
80 |
-----BEGIN PGP SIGNATURE----- |
81 |
Version: GnuPG v2.0.16 (GNU/Linux) |
82 |
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ |
83 |
|
84 |
iQEcBAEBAgAGBQJMuaRLAAoJEISPTA/exVD8Z40H/iGK1Mtz9eg47XiMxfCMshO2 |
85 |
j9s/ULrVI3KKvDr9ygOu/mGApv9pKENgiAz3X1HTSQpT42A/UmrWCHkkUl2JV1Lh |
86 |
iCxGzzcbqnuysbiJjKPTbdoqRf0Z5EZWhGXwxtGzMpgD/c98GrJTzOra9e2MK3Yx |
87 |
t0JBUHy8eBfDMdVGs6Ae0ygkzvhRlAeBtb9cVwT9MTEU+IgpedKhEZnypZjs74By |
88 |
QsLZ2N8ZMv8f2nq71FvdU8U3QjxUjwXfCFfNDXcQhrkHNyHoVAOBhbgB38qMc+Vj |
89 |
CVHtfyWZs4SF7CiKrgGmvMQVi0prrHve6ebg0i/S/7pwy79ZDLUIWHtoHzpWILo= |
90 |
=DR/y |
91 |
-----END PGP SIGNATURE----- |