1 |
This is what I see when I plugged in two memory modules: |
2 |
======================================================= |
3 |
*-memory |
4 |
description: System Memory |
5 |
physical id: 2f |
6 |
slot: System board or motherboard |
7 |
size: 16GiB |
8 |
*-bank:0 |
9 |
description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns) |
10 |
product: Array1_PartNumber1 |
11 |
vendor: A1_Manufacturer1 |
12 |
physical id: 0 |
13 |
serial: A1_SerNum1 |
14 |
slot: DIMM_A1 |
15 |
size: 8GiB |
16 |
width: 64 bits |
17 |
clock: 1333MHz (0.8ns) |
18 |
*-bank:1 |
19 |
description: [empty] |
20 |
product: Array1_PartNumber0 |
21 |
vendor: A1_Manufacturer0 |
22 |
physical id: 1 |
23 |
serial: A1_SerNum0 |
24 |
slot: DIMM_A2 |
25 |
*-bank:2 |
26 |
description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns) |
27 |
product: F3-2133C9-8GXH |
28 |
vendor: Undefined |
29 |
physical id: 2 |
30 |
serial: 00000000 |
31 |
slot: DIMM_B1 |
32 |
size: 8GiB |
33 |
width: 64 bits |
34 |
clock: 1333MHz (0.8ns) |
35 |
*-bank:3 |
36 |
description: [empty] |
37 |
product: Array1_PartNumber3 |
38 |
vendor: A1_Manufacturer3 |
39 |
physical id: 3 |
40 |
serial: A1_SerNum3 |
41 |
slot: DIMM_B2 |
42 |
======================================== |
43 |
|
44 |
These were bought as a set from Amazon: |
45 |
|
46 |
http://www.amazon.co.uk/Ripjaws-PC17000-2133MHz-Memory-Platforms/dp/B007COT274/ |
47 |
|
48 |
but as you can see above only the second module reports a product code |
49 |
(product: F3-2133C9-8GXH), while the first module shows "Array1_PartNumber1". |
50 |
|
51 |
Is this normal? Is there something wrong with the memory module(s), the MoBo, |
52 |
or even the lshw command? |
53 |
|
54 |
-- |
55 |
Regards, |
56 |
Mick |