| 1 |
Tobias wrote: |
| 2 |
|
| 3 |
> Hi!! |
| 4 |
> If i do dmesg i get scsi0 : sata_sil ... shouldnt there be the SCSI |
| 5 |
> Emultation.... |
| 6 |
> scsi1 : sata_sil |
| 7 |
> Vendor: ATA ... thats my SATA HD |
| 8 |
> ------------------------ |
| 9 |
> if i do cat /proc/scsi/scsi i get: |
| 10 |
> |
| 11 |
> Attached devices: |
| 12 |
> Host: scsi0 Channel: 00 Id: 00 Lun: 00 |
| 13 |
> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O |
| 14 |
> Type: Direct-Access ANSI SCSI revision: 05 |
| 15 |
> ----------- |
| 16 |
> # the dmesg scsi msg |
| 17 |
> |
| 18 |
> sata_sil version 0.9 |
| 19 |
> ACPI: PCI *Interrupt* Link [LNK3] enabled at IRQ 11 |
| 20 |
> ACPI: PCI *Interrupt* 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level, |
| 21 |
> low) -> IRQ 11 |
| 22 |
> ata1: SATA max UDMA/100 cmd 0xE08AE080 ctl 0xE08AE08A bmdma 0xE08AE000 |
| 23 |
> irq 11 |
| 24 |
> ata2: SATA max UDMA/100 cmd 0xE08AE0C0 ctl 0xE08AE0CA bmdma 0xE08AE008 |
| 25 |
> irq 11 |
| 26 |
> ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 |
| 27 |
> 87:4023 88:203f |
| 28 |
> ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48 |
| 29 |
> ata1: dev 0 configured for UDMA/100 |
| 30 |
> scsi0 : sata_sil |
| 31 |
> ata2: no device found (phy stat 00000000) |
| 32 |
> scsi1 : sata_sil |
| 33 |
> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O |
| 34 |
> Type: Direct-Access ANSI SCSI revision: 05 |
| 35 |
> SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) |
| 36 |
> SCSI device sda: drive cache: write back |
| 37 |
> SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) |
| 38 |
> SCSI device sda: drive cache: write back |
| 39 |
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > |
| 40 |
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 |
| 41 |
> --------- |
| 42 |
> Maybe a wrong *interrupt* is the problem! |
| 43 |
> |
| 44 |
> CPU0 |
| 45 |
> 0: 4724423 XT-PIC timer |
| 46 |
> 1: 7103 XT-PIC i8042 |
| 47 |
> 2: 0 XT-PIC cascade |
| 48 |
> 5: 944743 XT-PIC ehci_hcd:usb1, NVidia nForce2, skge, ICE1712, eth0 |
| 49 |
> 7: 5803 XT-PIC parport0 |
| 50 |
> 8: 0 XT-PIC rtc |
| 51 |
> 9: 3 XT-PIC acpi, ohci_hcd:usb3, ohci1394 |
| 52 |
> 10: 0 XT-PIC MPU401 UART |
| 53 |
> 11: 360076 XT-PIC ohci_hcd:usb2, libata, nvidia |
| 54 |
> 12: 223166 XT-PIC i8042 |
| 55 |
> 14: 1200 XT-PIC ide0 |
| 56 |
> 15: 1870 XT-PIC ide1 |
| 57 |
> NMI: 0 |
| 58 |
> LOC: 4724640 |
| 59 |
> ERR: 53 |
| 60 |
> MIS: 0 |
| 61 |
> |
| 62 |
> Please help! |
| 63 |
> |
| 64 |
> Greetings,He4D |
| 65 |
|
| 66 |
Okay! |
| 67 |
I want to mount my USB 2.0 Harddisk. |
| 68 |
But i cant mount it without the /dev/sd.... device |
| 69 |
Ive done everything that stands in the Gentoo USB Install Manual. |
| 70 |
Nothing worked! The Kernel is 100% right configured!! |
| 71 |
|
| 72 |
Greetings, He4D |
Archives