1 |
want to leave this list but I can not, can someone erase me from this list? |
2 |
|
3 |
On Wed, Apr 6, 2011 at 12:06, Mark Knecht <markknecht@×××××.com> wrote: |
4 |
|
5 |
> On Tue, Apr 5, 2011 at 5:00 PM, Neil Bothwick <neil@××××××××××.uk> wrote: |
6 |
> > On Tue, 5 Apr 2011 15:25:16 -0700, Mark Knecht wrote: |
7 |
> > |
8 |
> >> I hooked up second monitor to my Nvidia GTX465 card yesterday and |
9 |
> >> wanted to get dual screen running. Unfortunately, except for using |
10 |
> >> Twinview which works fine, I've been unable to do it without Twinview. |
11 |
> >> Twinview itself isn't bad, but I don't like how ever KDE decision I |
12 |
> >> have to take (logout, settings, etc.) always starts spanned across my |
13 |
> >> two monitors. That doesn't happen on my dual screen Intel system. |
14 |
> > |
15 |
> > You can change that in the Display & Monitors section of KDE's System |
16 |
> > Settings. |
17 |
> > |
18 |
> > |
19 |
> > -- |
20 |
> > Neil Bothwick |
21 |
> |
22 |
> Hi Neil, |
23 |
> The problem is that after I'm in KDE it seems the damage is done. |
24 |
> Settings->Display thing shows only a single 1920x1080 monitor hooked |
25 |
> to 'default'. The second monitor isn't found at all. |
26 |
> |
27 |
> I suspect that what I need to do next is go back and boot the 2 |
28 |
> screen version and see what the X log file actually says. |
29 |
> |
30 |
> I'm currently using Twinview where Settings->Display shows both |
31 |
> monitors. While it's working well there is evidence that X doesn't |
32 |
> like the monitor settings in the config file I got using |
33 |
> nvidia-settings. Possibly the EDID values are causing X to not enable |
34 |
> the second monitor at all in the 2 screen version? |
35 |
> |
36 |
> Cheers, |
37 |
> Mark |
38 |
> |
39 |
> mark@c2stable ~ $ cat /var/log/Xorg.0.log |
40 |
> [ 665.512] |
41 |
> X.Org X Server 1.9.4 |
42 |
> Release Date: 2011-02-04 |
43 |
> [ 665.512] X Protocol Version 11, Revision 0 |
44 |
> [ 665.512] Build Operating System: Linux 2.6.36-gentoo-r6 x86_64 Gentoo |
45 |
> [ 665.512] Current Operating System: Linux c2stable 2.6.38-gentoo-r1 |
46 |
> #1 SMP PREEMPT Wed Mar 30 12:24:58 PDT 2011 x86_64 |
47 |
> [ 665.512] Kernel command line: root=/dev/md126 |
48 |
> [ 665.512] Build Date: 13 February 2011 06:29:22AM |
49 |
> [ 665.512] |
50 |
> [ 665.512] Current version of pixman: 0.20.2 |
51 |
> [ 665.512] Before reporting problems, check http://wiki.x.org |
52 |
> to make sure that you have the latest version. |
53 |
> [ 665.512] Markers: (--) probed, (**) from config file, (==) default |
54 |
> setting, |
55 |
> (++) from command line, (!!) notice, (II) informational, |
56 |
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. |
57 |
> [ 665.512] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 6 |
58 |
> 05:22:43 2011 |
59 |
> [ 665.512] (==) Using config file: "/etc/X11/xorg.conf" |
60 |
> [ 665.512] (==) Using config directory: "/etc/X11/xorg.conf.d" |
61 |
> [ 665.512] (==) Using system config directory |
62 |
> "/usr/share/X11/xorg.conf.d" |
63 |
> [ 665.512] (==) ServerLayout "Layout0" |
64 |
> [ 665.512] (**) |-->Screen "Screen0" (0) |
65 |
> [ 665.512] (**) | |-->Monitor "Monitor0" |
66 |
> [ 665.512] (**) | |-->Device "Device0" |
67 |
> [ 665.512] (**) |-->Input Device "Keyboard0" |
68 |
> [ 665.512] (**) |-->Input Device "Mouse0" |
69 |
> [ 665.512] (==) Automatically adding devices |
70 |
> [ 665.512] (==) Automatically enabling devices |
71 |
> [ 665.512] (WW) The directory "/usr/share/fonts/TTF/" does not exist. |
72 |
> [ 665.512] Entry deleted from font path. |
73 |
> [ 665.512] (WW) The directory "/usr/share/fonts/OTF/" does not exist. |
74 |
> [ 665.512] Entry deleted from font path. |
75 |
> [ 665.512] (==) FontPath set to: |
76 |
> /usr/share/fonts/misc/, |
77 |
> /usr/share/fonts/Type1/, |
78 |
> /usr/share/fonts/100dpi/, |
79 |
> /usr/share/fonts/75dpi/ |
80 |
> [ 665.512] (==) ModulePath set to "/usr/lib64/xorg/modules" |
81 |
> [ 665.512] (WW) AllowEmptyInput is on, devices using drivers 'kbd', |
82 |
> 'mouse' or 'vmmouse' will be disabled. |
83 |
> [ 665.512] (WW) Disabling Keyboard0 |
84 |
> [ 665.512] (WW) Disabling Mouse0 |
85 |
> [ 665.512] (II) Loader magic: 0x7ca080 |
86 |
> [ 665.512] (II) Module ABI versions: |
87 |
> [ 665.512] X.Org ANSI C Emulation: 0.4 |
88 |
> [ 665.512] X.Org Video Driver: 8.0 |
89 |
> [ 665.512] X.Org XInput driver : 11.0 |
90 |
> [ 665.512] X.Org Server Extension : 4.0 |
91 |
> [ 665.513] (--) PCI:*(0:2:0:0) 10de:06c4:3842:1467 rev 163, Mem @ |
92 |
> 0xf8000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ |
93 |
> 0x0000ac00/128, BIOS @ 0x????????/524288 |
94 |
> [ 665.513] (II) Open ACPI successful (/var/run/acpid.socket) |
95 |
> [ 665.513] (II) LoadModule: "extmod" |
96 |
> [ 665.513] (II) Loading |
97 |
> /usr/lib64/xorg/modules/extensions/libextmod.so |
98 |
> [ 665.513] (II) Module extmod: vendor="X.Org Foundation" |
99 |
> [ 665.513] compiled for 1.9.4, module version = 1.0.0 |
100 |
> [ 665.513] Module class: X.Org Server Extension |
101 |
> [ 665.513] ABI class: X.Org Server Extension, version 4.0 |
102 |
> [ 665.513] (II) Loading extension MIT-SCREEN-SAVER |
103 |
> [ 665.513] (II) Loading extension XFree86-VidModeExtension |
104 |
> [ 665.513] (II) Loading extension XFree86-DGA |
105 |
> [ 665.513] (II) Loading extension DPMS |
106 |
> [ 665.513] (II) Loading extension XVideo |
107 |
> [ 665.513] (II) Loading extension XVideo-MotionCompensation |
108 |
> [ 665.513] (II) Loading extension X-Resource |
109 |
> [ 665.513] (II) LoadModule: "dbe" |
110 |
> [ 665.513] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so |
111 |
> [ 665.513] (II) Module dbe: vendor="X.Org Foundation" |
112 |
> [ 665.513] compiled for 1.9.4, module version = 1.0.0 |
113 |
> [ 665.513] Module class: X.Org Server Extension |
114 |
> [ 665.513] ABI class: X.Org Server Extension, version 4.0 |
115 |
> [ 665.513] (II) Loading extension DOUBLE-BUFFER |
116 |
> [ 665.513] (II) LoadModule: "glx" |
117 |
> [ 665.513] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so |
118 |
> [ 665.518] (II) Module glx: vendor="NVIDIA Corporation" |
119 |
> [ 665.518] compiled for 4.0.2, module version = 1.0.0 |
120 |
> [ 665.518] Module class: X.Org Server Extension |
121 |
> [ 665.518] (II) NVIDIA GLX Module 270.18 Tue Jan 18 22:03:05 PST 2011 |
122 |
> [ 665.518] (II) Loading extension GLX |
123 |
> [ 665.518] (II) LoadModule: "record" |
124 |
> [ 665.518] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so |
125 |
> [ 665.519] (II) Module record: vendor="X.Org Foundation" |
126 |
> [ 665.519] compiled for 1.9.4, module version = 1.13.0 |
127 |
> [ 665.519] Module class: X.Org Server Extension |
128 |
> [ 665.519] ABI class: X.Org Server Extension, version 4.0 |
129 |
> [ 665.519] (II) Loading extension RECORD |
130 |
> [ 665.519] (II) LoadModule: "dri" |
131 |
> [ 665.519] (WW) Warning, couldn't open module dri |
132 |
> [ 665.519] (II) UnloadModule: "dri" |
133 |
> [ 665.519] (EE) Failed to load module "dri" (module does not exist, 0) |
134 |
> [ 665.519] (II) LoadModule: "dri2" |
135 |
> [ 665.519] (WW) Warning, couldn't open module dri2 |
136 |
> [ 665.519] (II) UnloadModule: "dri2" |
137 |
> [ 665.519] (EE) Failed to load module "dri2" (module does not exist, 0) |
138 |
> [ 665.519] (II) LoadModule: "nvidia" |
139 |
> [ 665.519] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so |
140 |
> [ 665.519] (II) Module nvidia: vendor="NVIDIA Corporation" |
141 |
> [ 665.519] compiled for 4.0.2, module version = 1.0.0 |
142 |
> [ 665.519] Module class: X.Org Video Driver |
143 |
> [ 665.519] (II) NVIDIA dlloader X Driver 270.18 Tue Jan 18 21:47:56 PST |
144 |
> 2011 |
145 |
> [ 665.519] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs |
146 |
> [ 665.519] (++) using VT number 8 |
147 |
> |
148 |
> [ 665.535] (II) Loading sub module "fb" |
149 |
> [ 665.535] (II) LoadModule: "fb" |
150 |
> [ 665.535] (II) Loading /usr/lib64/xorg/modules/libfb.so |
151 |
> [ 665.535] (II) Module fb: vendor="X.Org Foundation" |
152 |
> [ 665.535] compiled for 1.9.4, module version = 1.0.0 |
153 |
> [ 665.535] ABI class: X.Org ANSI C Emulation, version 0.4 |
154 |
> [ 665.535] (II) Loading sub module "wfb" |
155 |
> [ 665.535] (II) LoadModule: "wfb" |
156 |
> [ 665.535] (II) Loading /usr/lib64/xorg/modules/libwfb.so |
157 |
> [ 665.535] (II) Module wfb: vendor="X.Org Foundation" |
158 |
> [ 665.535] compiled for 1.9.4, module version = 1.0.0 |
159 |
> [ 665.535] ABI class: X.Org ANSI C Emulation, version 0.4 |
160 |
> [ 665.535] (II) Loading sub module "ramdac" |
161 |
> [ 665.535] (II) LoadModule: "ramdac" |
162 |
> [ 665.535] (II) Module "ramdac" already built-in |
163 |
> [ 665.535] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card |
164 |
> support |
165 |
> [ 665.535] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 |
166 |
> [ 665.535] (==) NVIDIA(0): RGB weight 888 |
167 |
> [ 665.535] (==) NVIDIA(0): Default visual is TrueColor |
168 |
> [ 665.535] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) |
169 |
> [ 665.535] (**) NVIDIA(0): Option "TwinView" |
170 |
> [ 665.535] (**) NVIDIA(0): Option "TwinViewOrientation" "RightOf" |
171 |
> [ 665.535] (**) NVIDIA(0): Option "MetaModes" "1920x1080,1920x1080; |
172 |
> 1920x1080" |
173 |
> [ 665.535] (**) NVIDIA(0): Enabling RENDER acceleration |
174 |
> [ 665.535] (II) NVIDIA(0): Support for GLX with the Damage and |
175 |
> Composite X extensions is |
176 |
> [ 665.535] (II) NVIDIA(0): enabled. |
177 |
> [ 666.087] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) |
178 |
> does not support NVIDIA |
179 |
> [ 666.087] (II) NVIDIA(GPU-0): 3D Vision stereo. |
180 |
> [ 666.120] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-2)) |
181 |
> does not support NVIDIA |
182 |
> [ 666.120] (II) NVIDIA(GPU-0): 3D Vision stereo. |
183 |
> [ 666.121] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 465 (GF100) at |
184 |
> PCI:2:0:0 (GPU-0) |
185 |
> [ 666.121] (--) NVIDIA(0): Memory: 1048576 kBytes |
186 |
> [ 666.121] (--) NVIDIA(0): VideoBIOS: 70.00.35.00.60 |
187 |
> [ 666.121] (II) NVIDIA(0): Detected PCI Express Link width: 16X |
188 |
> [ 666.121] (--) NVIDIA(0): Interlaced video modes are supported on this |
189 |
> GPU |
190 |
> [ 666.121] (--) NVIDIA(0): Connected display device(s) on GeForce |
191 |
> GTX 465 at PCI:2:0:0 |
192 |
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-0) |
193 |
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-2) |
194 |
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz |
195 |
> maximum pixel clock |
196 |
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link |
197 |
> TMDS |
198 |
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): 330.0 MHz |
199 |
> maximum pixel clock |
200 |
> [ 666.121] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): Internal Dual Link |
201 |
> TMDS |
202 |
> [ 666.123] (**) NVIDIA(0): TwinView enabled |
203 |
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) |
204 |
> contradicts itself: |
205 |
> [ 666.172] (WW) NVIDIA(0): mode "1920x1080" is specified in the |
206 |
> EDID; however, the |
207 |
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range |
208 |
> (56.000-61.000 Hz) would |
209 |
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0 |
210 |
> Hz); ignoring |
211 |
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1920x1080". |
212 |
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) |
213 |
> contradicts itself: |
214 |
> [ 666.172] (WW) NVIDIA(0): mode "1280x720" is specified in the |
215 |
> EDID; however, the |
216 |
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range |
217 |
> (56.000-61.000 Hz) would |
218 |
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0 |
219 |
> Hz); ignoring |
220 |
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1280x720". |
221 |
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) |
222 |
> contradicts itself: |
223 |
> [ 666.172] (WW) NVIDIA(0): mode "720x576" is specified in the |
224 |
> EDID; however, the |
225 |
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range |
226 |
> (56.000-61.000 Hz) would |
227 |
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0 |
228 |
> Hz); ignoring |
229 |
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "720x576". |
230 |
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) |
231 |
> contradicts itself: |
232 |
> [ 666.172] (WW) NVIDIA(0): mode "1920x1080" is specified in the |
233 |
> EDID; however, the |
234 |
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range |
235 |
> (56.000-61.000 Hz) would |
236 |
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0 |
237 |
> Hz); ignoring |
238 |
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1920x1080". |
239 |
> [ 666.172] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) |
240 |
> contradicts itself: |
241 |
> [ 666.172] (WW) NVIDIA(0): mode "1280x720" is specified in the |
242 |
> EDID; however, the |
243 |
> [ 666.172] (WW) NVIDIA(0): EDID's valid VertRefresh range |
244 |
> (56.000-61.000 Hz) would |
245 |
> [ 666.172] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0 |
246 |
> Hz); ignoring |
247 |
> [ 666.172] (WW) NVIDIA(0): VertRefresh check for mode "1280x720". |
248 |
> [ 666.173] (WW) NVIDIA(0): The EDID for Samsung SyncMaster (DFP-0) |
249 |
> contradicts itself: |
250 |
> [ 666.173] (WW) NVIDIA(0): mode "720x576" is specified in the |
251 |
> EDID; however, the |
252 |
> [ 666.173] (WW) NVIDIA(0): EDID's valid VertRefresh range |
253 |
> (56.000-61.000 Hz) would |
254 |
> [ 666.173] (WW) NVIDIA(0): exclude this mode's VertRefresh (50.0 |
255 |
> Hz); ignoring |
256 |
> [ 666.173] (WW) NVIDIA(0): VertRefresh check for mode "720x576". |
257 |
> [ 666.208] (II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-2 |
258 |
> [ 666.208] (II) NVIDIA(0): Validated modes: |
259 |
> [ 666.208] (II) NVIDIA(0): "1920x1080,1920x1080" |
260 |
> [ 666.208] (II) NVIDIA(0): "1920x1080" |
261 |
> [ 666.208] (II) NVIDIA(0): Virtual screen size determined to be 3840 x |
262 |
> 1080 |
263 |
> [ 666.232] (--) NVIDIA(0): DPI set to (95, 94); computed from |
264 |
> "UseEdidDpi" X config |
265 |
> [ 666.232] (--) NVIDIA(0): option |
266 |
> [ 666.232] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. |
267 |
> [ 666.232] (--) Depth 24 pixmap format is 32 bpp |
268 |
> [ 666.232] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect |
269 |
> memory |
270 |
> [ 666.232] (II) NVIDIA: access. |
271 |
> [ 666.236] (II) NVIDIA(0): Initialized GPU GART. |
272 |
> [ 666.247] (II) NVIDIA(0): Setting mode "1920x1080,1920x1080" |
273 |
> [ 666.282] (II) Loading extension NV-GLX |
274 |
> [ 666.387] (II) NVIDIA(0): Initialized OpenGL Acceleration |
275 |
> [ 666.387] (==) NVIDIA(0): Disabling shared memory pixmaps |
276 |
> [ 666.387] (II) NVIDIA(0): Initialized X Rendering Acceleration |
277 |
> [ 666.387] (==) NVIDIA(0): Backing store disabled |
278 |
> [ 666.387] (==) NVIDIA(0): Silken mouse enabled |
279 |
> [ 666.387] (**) NVIDIA(0): DPMS enabled |
280 |
> [ 666.388] (II) Loading extension NV-CONTROL |
281 |
> [ 666.388] (II) Loading extension XINERAMA |
282 |
> [ 666.388] (II) Loading sub module "dri2" |
283 |
> [ 666.388] (II) LoadModule: "dri2" |
284 |
> [ 666.388] (WW) Warning, couldn't open module dri2 |
285 |
> [ 666.388] (II) UnloadModule: "dri2" |
286 |
> [ 666.388] (EE) NVIDIA: Failed to load module "dri2" (module does |
287 |
> not exist, 0) |
288 |
> [ 666.388] (II) NVIDIA(0): The X server will not be able to send the |
289 |
> VDPAU driver name to |
290 |
> [ 666.388] (II) NVIDIA(0): libvdpau. |
291 |
> [ 666.388] (==) RandR enabled |
292 |
> [ 666.388] (II) Initializing built-in extension Generic Event Extension |
293 |
> [ 666.388] (II) Initializing built-in extension SHAPE |
294 |
> [ 666.388] (II) Initializing built-in extension MIT-SHM |
295 |
> [ 666.388] (II) Initializing built-in extension XInputExtension |
296 |
> [ 666.388] (II) Initializing built-in extension XTEST |
297 |
> [ 666.388] (II) Initializing built-in extension BIG-REQUESTS |
298 |
> [ 666.388] (II) Initializing built-in extension SYNC |
299 |
> [ 666.388] (II) Initializing built-in extension XKEYBOARD |
300 |
> [ 666.388] (II) Initializing built-in extension XC-MISC |
301 |
> [ 666.388] (II) Initializing built-in extension XINERAMA |
302 |
> [ 666.388] (II) Initializing built-in extension XFIXES |
303 |
> [ 666.388] (II) Initializing built-in extension RENDER |
304 |
> [ 666.388] (II) Initializing built-in extension RANDR |
305 |
> [ 666.388] (II) Initializing built-in extension COMPOSITE |
306 |
> [ 666.388] (II) Initializing built-in extension DAMAGE |
307 |
> [ 666.389] (II) Initializing extension GLX |
308 |
> [ 666.424] (II) config/udev: Adding input device Power Button |
309 |
> (/dev/input/event1) |
310 |
> [ 666.424] (**) Power Button: Applying InputClass "evdev keyboard |
311 |
> catchall" |
312 |
> [ 666.424] (II) LoadModule: "evdev" |
313 |
> [ 666.424] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so |
314 |
> [ 666.424] (II) Module evdev: vendor="X.Org Foundation" |
315 |
> [ 666.424] compiled for 1.9.4, module version = 2.6.0 |
316 |
> [ 666.424] Module class: X.Org XInput Driver |
317 |
> [ 666.424] ABI class: X.Org XInput driver, version 11.0 |
318 |
> [ 666.424] (**) Power Button: always reports core events |
319 |
> [ 666.424] (**) Power Button: Device: "/dev/input/event1" |
320 |
> [ 666.431] (--) Power Button: Found keys |
321 |
> [ 666.431] (II) Power Button: Configuring as keyboard |
322 |
> [ 666.431] (II) XINPUT: Adding extended input device "Power Button" |
323 |
> (type: KEYBOARD) |
324 |
> [ 666.431] (**) Option "xkb_rules" "evdev" |
325 |
> [ 666.431] (**) Option "xkb_model" "evdev" |
326 |
> [ 666.431] (**) Option "xkb_layout" "us" |
327 |
> [ 666.444] (II) config/udev: Adding input device Power Button |
328 |
> (/dev/input/event0) |
329 |
> [ 666.444] (**) Power Button: Applying InputClass "evdev keyboard |
330 |
> catchall" |
331 |
> [ 666.444] (**) Power Button: always reports core events |
332 |
> [ 666.444] (**) Power Button: Device: "/dev/input/event0" |
333 |
> [ 666.451] (--) Power Button: Found keys |
334 |
> [ 666.451] (II) Power Button: Configuring as keyboard |
335 |
> [ 666.451] (II) XINPUT: Adding extended input device "Power Button" |
336 |
> (type: KEYBOARD) |
337 |
> [ 666.451] (**) Option "xkb_rules" "evdev" |
338 |
> [ 666.451] (**) Option "xkb_model" "evdev" |
339 |
> [ 666.451] (**) Option "xkb_layout" "us" |
340 |
> [ 666.452] (II) config/udev: Adding input device Microsoft Microsoft |
341 |
> 5-Button Mouse with IntelliEye(TM) (/dev/input/event3) |
342 |
> [ 666.452] (**) Microsoft Microsoft 5-Button Mouse with |
343 |
> IntelliEye(TM): Applying InputClass "evdev pointer catchall" |
344 |
> [ 666.452] (**) Microsoft Microsoft 5-Button Mouse with |
345 |
> IntelliEye(TM): always reports core events |
346 |
> [ 666.452] (**) Microsoft Microsoft 5-Button Mouse with |
347 |
> IntelliEye(TM): Device: "/dev/input/event3" |
348 |
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with |
349 |
> IntelliEye(TM): Found 9 mouse buttons |
350 |
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with |
351 |
> IntelliEye(TM): Found scroll wheel(s) |
352 |
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with |
353 |
> IntelliEye(TM): Found relative axes |
354 |
> [ 666.459] (--) Microsoft Microsoft 5-Button Mouse with |
355 |
> IntelliEye(TM): Found x and y relative axes |
356 |
> [ 666.459] (II) Microsoft Microsoft 5-Button Mouse with |
357 |
> IntelliEye(TM): Configuring as mouse |
358 |
> [ 666.459] (II) Microsoft Microsoft 5-Button Mouse with |
359 |
> IntelliEye(TM): Adding scrollwheel support |
360 |
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with |
361 |
> IntelliEye(TM): YAxisMapping: buttons 4 and 5 |
362 |
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with |
363 |
> IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, |
364 |
> EmulateWheelTimeout: 200 |
365 |
> [ 666.459] (II) XINPUT: Adding extended input device "Microsoft |
366 |
> Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE) |
367 |
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with |
368 |
> IntelliEye(TM): (accel) keeping acceleration scheme 1 |
369 |
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with |
370 |
> IntelliEye(TM): (accel) acceleration profile 0 |
371 |
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with |
372 |
> IntelliEye(TM): (accel) acceleration factor: 2.000 |
373 |
> [ 666.459] (**) Microsoft Microsoft 5-Button Mouse with |
374 |
> IntelliEye(TM): (accel) acceleration threshold: 4 |
375 |
> [ 666.459] (II) Microsoft Microsoft 5-Button Mouse with |
376 |
> IntelliEye(TM): initialized for relative axes. |
377 |
> [ 666.459] (II) config/udev: Adding input device Microsoft Microsoft |
378 |
> 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0) |
379 |
> [ 666.459] (II) No input driver/identifier specified (ignoring) |
380 |
> [ 666.465] (II) config/udev: Adding input device AT Translated Set 2 |
381 |
> keyboard (/dev/input/event2) |
382 |
> [ 666.465] (**) AT Translated Set 2 keyboard: Applying InputClass |
383 |
> "evdev keyboard catchall" |
384 |
> [ 666.465] (**) AT Translated Set 2 keyboard: always reports core events |
385 |
> [ 666.465] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2" |
386 |
> [ 666.471] (--) AT Translated Set 2 keyboard: Found keys |
387 |
> [ 666.471] (II) AT Translated Set 2 keyboard: Configuring as keyboard |
388 |
> [ 666.471] (II) XINPUT: Adding extended input device "AT Translated |
389 |
> Set 2 keyboard" (type: KEYBOARD) |
390 |
> [ 666.471] (**) Option "xkb_rules" "evdev" |
391 |
> [ 666.471] (**) Option "xkb_model" "evdev" |
392 |
> [ 666.471] (**) Option "xkb_layout" "us" |
393 |
> [ 666.471] (II) config/udev: Adding input device PS/2 Generic Mouse |
394 |
> (/dev/input/event4) |
395 |
> [ 666.471] (**) PS/2 Generic Mouse: Applying InputClass "evdev |
396 |
> pointer catchall" |
397 |
> [ 666.471] (**) PS/2 Generic Mouse: always reports core events |
398 |
> [ 666.471] (**) PS/2 Generic Mouse: Device: "/dev/input/event4" |
399 |
> [ 666.479] (--) PS/2 Generic Mouse: Found 3 mouse buttons |
400 |
> [ 666.479] (--) PS/2 Generic Mouse: Found relative axes |
401 |
> [ 666.479] (--) PS/2 Generic Mouse: Found x and y relative axes |
402 |
> [ 666.479] (II) PS/2 Generic Mouse: Configuring as mouse |
403 |
> [ 666.479] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 |
404 |
> [ 666.479] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, |
405 |
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200 |
406 |
> [ 666.479] (II) XINPUT: Adding extended input device "PS/2 Generic |
407 |
> Mouse" (type: MOUSE) |
408 |
> [ 666.479] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 |
409 |
> [ 666.479] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 |
410 |
> [ 666.479] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 |
411 |
> [ 666.479] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 |
412 |
> [ 666.479] (II) PS/2 Generic Mouse: initialized for relative axes. |
413 |
> [ 666.479] (II) config/udev: Adding input device PS/2 Generic Mouse |
414 |
> (/dev/input/mouse1) |
415 |
> [ 666.479] (II) No input driver/identifier specified (ignoring) |
416 |
> mark@c2stable ~ $ |
417 |
> |
418 |
> |
419 |
|
420 |
|
421 |
-- |
422 |
Atenciosamente, |
423 |
Gregory Fontenele |