1 |
Richard Fish wrote: |
2 |
|
3 |
> On 11/1/06, Rafael Barrera Oro <rafael@××××××××××××××××.ar> wrote: |
4 |
> |
5 |
>> pandemonium, i found out that things are way, way slower than before, is |
6 |
>> this a known effect of modular X.org? |
7 |
> |
8 |
> |
9 |
> Not that I'm aware of. Can you post your /var/log/Xorg.0.log |
10 |
> file...maybe there is some clue there. |
11 |
> |
12 |
> -Richard |
13 |
|
14 |
Gladly, could the problem be that i compiled with KDE with the DRI flag |
15 |
set on make.conf?, anyway here it goes: |
16 |
|
17 |
Information about my grapchic card: VGA compatible controller: VIA |
18 |
Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) |
19 |
|
20 |
System: Sempron 2800 with 512 Mb of RAM |
21 |
|
22 |
Kernel (uname -a): Linux gentoo64 2.6.17-gentoo-r5 #1 Wed Aug 16 |
23 |
12:27:04 UTC 2006 x86_64 AMD Sempron(tm) Processor 2800+ AuthenticAMD |
24 |
GNU/Linux |
25 |
|
26 |
Xorg.o.log: |
27 |
|
28 |
(II) VESA(0): Total Memory: 1024 64KB banks (65536kB) |
29 |
(WW) VESA(0): config file hsync range 31.5-57kHz not within DDC hsync |
30 |
ranges. |
31 |
(WW) VESA(0): config file vrefresh range 40-150Hz not within DDC |
32 |
vrefresh ranges. |
33 |
(II) VESA(0): My Monitor: Using hsync range of 31.50-57.00 kHz |
34 |
(II) VESA(0): My Monitor: Using vrefresh range of 40.00-150.00 Hz |
35 |
(--) VESA(0): Virtual size is 1024x768 (pitch 1024) |
36 |
(**) VESA(0): *Built-in mode "1024x768" |
37 |
(**) VESA(0): *Built-in mode "800x600" |
38 |
(**) VESA(0): *Built-in mode "640x480" |
39 |
(--) VESA(0): Display dimensions: (280, 210) mm |
40 |
(--) VESA(0): DPI set to (92, 92) |
41 |
(WW) (1024x768,My Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz |
42 |
(II) VESA(0): Attempting to use 70Hz refresh for mode "1024x768" (118) |
43 |
(II) VESA(0): Attempting to use 85Hz refresh for mode "800x600" (115) |
44 |
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (112) |
45 |
(**) VESA(0): Using "Shadow Framebuffer" |
46 |
(II) Loading sub module "shadow" |
47 |
(II) LoadModule: "shadow" |
48 |
(II) Loading /usr/lib64/xorg/modules/libshadow.so |
49 |
(II) Module shadow: vendor="X.Org Foundation" |
50 |
compiled for 7.1.1, module version = 1.1.0 |
51 |
ABI class: X.Org ANSI C Emulation, version 0.3 |
52 |
(II) Loading sub module "fb" |
53 |
(II) LoadModule: "fb" |
54 |
(II) Loading /usr/lib64/xorg/modules/libfb.so |
55 |
(II) Module fb: vendor="X.Org Foundation" |
56 |
compiled for 7.1.1, module version = 1.0.0 |
57 |
ABI class: X.Org ANSI C Emulation, version 0.3 |
58 |
(--) Depth 24 pixmap format is 32 bpp |
59 |
(II) do I need RAC? No, I don't. |
60 |
(II) resource ranges after preInit: |
61 |
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) |
62 |
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] |
63 |
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] |
64 |
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] |
65 |
[4] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] |
66 |
[5] -1 0 0xfebff800 - 0xfebff8ff (0x100) MX[B] |
67 |
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O |
68 |
[7] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B](B) |
69 |
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) |
70 |
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) |
71 |
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] |
72 |
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] |
73 |
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] |
74 |
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] |
75 |
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] |
76 |
[15] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] |
77 |
[16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] |
78 |
[17] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B] |
79 |
[18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] |
80 |
[19] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] |
81 |
[20] -1 0 0x0000c000 - 0x0000c01f (0x20) IX[B] |
82 |
[21] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] |
83 |
[22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] |
84 |
[23] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] |
85 |
[24] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] |
86 |
[25] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B] |
87 |
[26] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B] |
88 |
[27] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B] |
89 |
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] |
90 |
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] |
91 |
(II) Loading sub module "int10" |
92 |
(II) LoadModule: "int10" |
93 |
(II) Reloading /usr/lib64/xorg/modules/libint10.so |
94 |
(II) VESA(0): initializing int10 |
95 |
(II) VESA(0): Primary V_BIOS segment is: 0xc000 |
96 |
(II) VESA(0): VESA BIOS detected |
97 |
(II) VESA(0): VESA VBE Version 3.0 |
98 |
(II) VESA(0): VESA VBE Total Mem: 65536 kB |
99 |
(II) VESA(0): VESA VBE OEM: VIA K8M800 |
100 |
|
101 |
(II) VESA(0): VESA VBE OEM Software Rev: 1.0 |
102 |
(II) VESA(0): VESA VBE OEM Vendor: |
103 |
(II) VESA(0): VESA VBE OEM Product: |
104 |
(II) VESA(0): VESA VBE OEM Product Rev: |
105 |
(==) VESA(0): Write-combining range (0xf8000000,0x4000000) |
106 |
(II) VESA(0): virtual address = 0x2b9561131000, |
107 |
physical address = 0xf8000000, size = 67108864 |
108 |
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values. |
109 |
(==) VESA(0): Default visual is TrueColor |
110 |
(==) VESA(0): Backing store disabled |
111 |
(==) RandR enabled |
112 |
(II) Setting vga for screen 0. |
113 |
(II) Initializing built-in extension MIT-SHM |
114 |
(II) Initializing built-in extension XInputExtension |
115 |
(II) Initializing built-in extension XTEST |
116 |
(II) Initializing built-in extension XKEYBOARD |
117 |
(II) Initializing built-in extension XC-APPGROUP |
118 |
(II) Initializing built-in extension SECURITY |
119 |
(II) Initializing built-in extension XINERAMA |
120 |
(II) Initializing built-in extension XFIXES |
121 |
(II) Initializing built-in extension XFree86-Bigfont |
122 |
(II) Initializing built-in extension RENDER |
123 |
(II) Initializing built-in extension RANDR |
124 |
(II) Initializing built-in extension COMPOSITE |
125 |
(II) Initializing built-in extension DAMAGE |
126 |
(II) Initializing built-in extension XEVIE |
127 |
(**) Option "Protocol" "Auto" |
128 |
(**) Mouse1: Device: "/dev/psaux" |
129 |
(**) Mouse1: Protocol: "Auto" |
130 |
(**) Option "CorePointer" |
131 |
(**) Mouse1: Core Pointer |
132 |
(**) Option "Device" "/dev/psaux" |
133 |
(**) Option "Emulate3Buttons" |
134 |
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 |
135 |
(**) Option "ZAxisMapping" "4 5" |
136 |
(**) Mouse1: ZAxisMapping: buttons 4 and 5 |
137 |
(**) Mouse1: Buttons: 9 |
138 |
(**) Option "CoreKeyboard" |
139 |
(**) Keyboard1: Core Keyboard |
140 |
(**) Option "Protocol" "standard" |
141 |
(**) Keyboard1: Protocol: standard |
142 |
(**) Option "AutoRepeat" "500 30" |
143 |
(**) Option "XkbRules" "xorg" |
144 |
(**) Keyboard1: XkbRules: "xorg" |
145 |
(**) Option "XkbModel" "pc104" |
146 |
(**) Keyboard1: XkbModel: "pc104" |
147 |
(**) Option "XkbLayout" "latin" |
148 |
(**) Keyboard1: XkbLayout: "latin" |
149 |
(**) Option "CustomKeycodes" "off" |
150 |
(**) Keyboard1: CustomKeycodes disabled |
151 |
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) |
152 |
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) |
153 |
xkb_keycodes { include "xfree86+aliases(qwerty)" }; |
154 |
xkb_types { include "complete" }; |
155 |
xkb_compatibility { include "complete" }; |
156 |
xkb_symbols { include "pc(pc104)+latin" }; |
157 |
xkb_geometry { include "pc(pc104)" }; |
158 |
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2" |
159 |
(II) Mouse1: ps2EnableDataReporting: succeeded |
160 |
Could not init font path element /usr/share/fonts/local/, removing from |
161 |
list! |
162 |
FreeType: couldn't open face /usr/share/fonts/TTF/luximr.ttf: 1 |
163 |
FreeType: couldn't open face /usr/share/fonts/TTF/luximr.ttf: 1 |
164 |
xkb_keycodes { include "xfree86+aliases(qwerty)" }; |
165 |
xkb_types { include "complete" }; |
166 |
xkb_compatibility { include "complete" }; |
167 |
xkb_symbols { include "pc(pc105)+es" }; |
168 |
xkb_geometry { include "pc(pc105)" }; |
169 |
|
170 |
-- |
171 |
gentoo-user@g.o mailing list |