1 |
Hi, |
2 |
|
3 |
For rendering purposes I often start my PC, start the rendering job |
4 |
and go to work. |
5 |
For power saving puproses I would like, that my PC "recognizes" its |
6 |
idle state and go down "as far as possible". |
7 |
|
8 |
I heard of ACPI and suspend-to-RAM. |
9 |
I dont lik eto experiment a lot and finally find out, that it was |
10 |
impossible due to the start conditions and I should have known |
11 |
better. |
12 |
|
13 |
So I would like to know, what preconditions must be fullfilled to get |
14 |
that working. |
15 |
|
16 |
My system is an up-to-date Gentoo Linux system. |
17 |
cpuinfo says: |
18 |
processor : 0/1 <<- changed by me to minimize text |
19 |
vendor_id : AuthenticAMD |
20 |
cpu family : 15 |
21 |
model : 43 |
22 |
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ |
23 |
stepping : 1 |
24 |
cpu MHz : 2002.659 |
25 |
cache size : 512 KB |
26 |
physical id : 0 |
27 |
siblings : 2 |
28 |
core id : 0 |
29 |
cpu cores : 2 |
30 |
fdiv_bug : no |
31 |
hlt_bug : no |
32 |
f00f_bug : no |
33 |
coma_bug : no |
34 |
fpu : yes |
35 |
fpu_exception : yes |
36 |
cpuid level : 1 |
37 |
wp : yes |
38 |
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp |
39 |
bogomips : 4010.54 |
40 |
|
41 |
lspci says: |
42 |
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge |
43 |
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge |
44 |
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge |
45 |
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge |
46 |
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge |
47 |
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge |
48 |
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] |
49 |
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) |
50 |
00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) |
51 |
00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) |
52 |
00:0c.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02) |
53 |
00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 03) |
54 |
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) |
55 |
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) |
56 |
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) |
57 |
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) |
58 |
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) |
59 |
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) |
60 |
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) |
61 |
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] |
62 |
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) |
63 |
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) |
64 |
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration |
65 |
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map |
66 |
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller |
67 |
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control |
68 |
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] |
69 |
|
70 |
I have attached one SATA-disk to my system with about 1GB swap. |
71 |
Finally there are 1GB Dual-Channel RAM inside. |
72 |
|
73 |
My monitor understands DPMS. |
74 |
My bios has APM and ACPI switches. |
75 |
My bootlog says beside other things about ACPI: |
76 |
|
77 |
ACPI: Core revision 20060707 |
78 |
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired |
79 |
Parsing all Control Methods: |
80 |
Table [DSDT](id 0005) - 537 Objects with 50 Devices 140 Methods 25 Regions |
81 |
ACPI Namespace successfully loaded at root c0507030 |
82 |
|
83 |
Do I have a chance to successfully enable ACPI and supsend-to-RAM |
84 |
without hurting my hardware? |
85 |
|
86 |
Where can I get good informations about successfully activating ACPI |
87 |
on my PC? |
88 |
|
89 |
Thank you very much for any link/hint/help in advance ! :O) |
90 |
|
91 |
Keep hacking! |
92 |
mcc |
93 |
-- |
94 |
gentoo-user@g.o mailing list |