| 1 |
Hi list, |
| 2 |
since I updated to some of new linux kernels versions, I started |
| 3 |
to experimenting many problems with my usb devices / hub, which makes |
| 4 |
my computer works in a very strange manner. Researching on this |
| 5 |
direction on the web, I noticed that many people have the same/similar |
| 6 |
problem as mine, where always linux kernel kprints the following |
| 7 |
message to the dmesg output using this template: usb X-X: device not |
| 8 |
accepting address XX, error -XXX. |
| 9 |
Are kernel developers, mainly the usb team, aware of this problem? |
| 10 |
What should I have to do to find a solution for my case? This is |
| 11 |
happening with my laptop. I need to know if this could be a hardware |
| 12 |
problem, because my laptop is still under guarantee and if it is a |
| 13 |
hardware problem, I will contact the seller. |
| 14 |
Please, any suggestion/tip will be greatfully accepted. Thank you! |
| 15 |
|
| 16 |
Kernel version: |
| 17 |
# uname -r |
| 18 |
2.6.32-23 x86_64 |
| 19 |
|
| 20 |
Example of dmes output: |
| 21 |
|
| 22 |
[ 2029.790225] usb 7-1: new full speed USB device using uhci_hcd and address 10 |
| 23 |
[ 2044.910100] usb 7-1: device descriptor read/64, error -110 |
| 24 |
[ 2060.140082] usb 7-1: device descriptor read/64, error -110 |
| 25 |
[ 2060.370101] usb 7-1: new full speed USB device using uhci_hcd and address 11 |
| 26 |
[ 2075.492621] usb 7-1: device descriptor read/64, error -110 |
| 27 |
[ 2090.720082] usb 7-1: device descriptor read/64, error -110 |
| 28 |
[ 2090.950089] usb 7-1: new full speed USB device using uhci_hcd and address 12 |
| 29 |
[ 2101.370344] usb 7-1: device not accepting address 12, error -110 |
| 30 |
[ 2101.490132] usb 7-1: new full speed USB device using uhci_hcd and address 13 |
| 31 |
[ 2111.910085] usb 7-1: device not accepting address 13, error -110 |
| 32 |
[ 2111.910123] hub 7-0:1.0: unable to enumerate USB device on port 1 |
| 33 |
[ 2112.034915] usb 7-2: new full speed USB device using uhci_hcd and address 14 |
| 34 |
[ 2127.150161] usb 7-2: device descriptor read/64, error -110 |
| 35 |
[ 2142.380160] usb 7-2: device descriptor read/64, error -110 |
| 36 |
[ 2142.610230] usb 7-2: new full speed USB device using uhci_hcd and address 15 |
| 37 |
[ 2157.730188] usb 7-2: device descriptor read/64, error -110 |
| 38 |
|
| 39 |
lspci output: |
| 40 |
|
| 41 |
|
| 42 |
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory |
| 43 |
Controller Hub (rev 07) |
| 44 |
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series |
| 45 |
Chipset Integrated Graphics Controller (rev 07) |
| 46 |
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset |
| 47 |
Integrated Graphics Controller (rev 07) |
| 48 |
00:03.0 Communication controller: Intel Corporation Mobile 4 Series |
| 49 |
Chipset MEI Controller (rev 07) |
| 50 |
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network |
| 51 |
Connection (rev 03) |
| 52 |
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 53 |
UHCI Controller #4 (rev 03) |
| 54 |
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 55 |
UHCI Controller #5 (rev 03) |
| 56 |
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 57 |
UHCI Controller #6 (rev 03) |
| 58 |
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 |
| 59 |
EHCI Controller #2 (rev 03) |
| 60 |
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio |
| 61 |
Controller (rev 03) |
| 62 |
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express |
| 63 |
Port 1 (rev 03) |
| 64 |
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express |
| 65 |
Port 3 (rev 03) |
| 66 |
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 67 |
UHCI Controller #1 (rev 03) |
| 68 |
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 69 |
UHCI Controller #2 (rev 03) |
| 70 |
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 71 |
UHCI Controller #3 (rev 03) |
| 72 |
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 |
| 73 |
EHCI Controller #1 (rev 03) |
| 74 |
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) |
| 75 |
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) |
| 76 |
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI |
| 77 |
Controller (rev 03) |
| 78 |
01:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100 |
| 79 |
03:0b.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) |
| 80 |
03:0b.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) |
| 81 |
03:0b.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro |
| 82 |
Host Adapter (rev 21) |
| 83 |
03:0b.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host |
| 84 |
Adapter (rev 11) |
| 85 |
03:0b.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) |
| 86 |
|
| 87 |
lspci -vvv output for usb hubs: |
| 88 |
|
| 89 |
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 90 |
UHCI Controller #1 (rev 03) |
| 91 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 92 |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 93 |
Stepping- SERR- FastB2B- DisINTx- |
| 94 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 95 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 96 |
Latency: 0 |
| 97 |
Interrupt: pin A routed to IRQ 23 |
| 98 |
Region 4: I/O ports at cf00 [size=32] |
| 99 |
Capabilities: [50] PCIe advanced features <?> |
| 100 |
Kernel driver in use: uhci_hcd |
| 101 |
|
| 102 |
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 103 |
UHCI Controller #2 (rev 03) |
| 104 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 105 |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 106 |
Stepping- SERR- FastB2B- DisINTx- |
| 107 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 108 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 109 |
Latency: 0 |
| 110 |
Interrupt: pin B routed to IRQ 19 |
| 111 |
Region 4: I/O ports at cee0 [size=32] |
| 112 |
Capabilities: [50] PCIe advanced features <?> |
| 113 |
Kernel driver in use: uhci_hcd |
| 114 |
|
| 115 |
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 116 |
UHCI Controller #3 (rev 03) |
| 117 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 118 |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 119 |
Stepping- SERR- FastB2B- DisINTx- |
| 120 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 121 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 122 |
Latency: 0 |
| 123 |
Interrupt: pin C routed to IRQ 18 |
| 124 |
Region 4: I/O ports at cec0 [size=32] |
| 125 |
Capabilities: [50] PCIe advanced features <?> |
| 126 |
Kernel driver in use: uhci_hcd |
| 127 |
|
| 128 |
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 |
| 129 |
EHCI Controller #1 (rev 03) (prog-if 20) |
| 130 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 131 |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 132 |
Stepping- SERR- FastB2B- DisINTx- |
| 133 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 134 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 135 |
Latency: 0 |
| 136 |
Interrupt: pin A routed to IRQ 23 |
| 137 |
Region 0: Memory at ffcfc000 (32-bit, non-prefetchable) [size=1K] |
| 138 |
Capabilities: [50] Power Management version 2 |
| 139 |
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA |
| 140 |
PME(D0+,D1-,D2-,D3hot+,D3cold+) |
| 141 |
Status: D0 PME-Enable- DSel=0 DScale=0 PME- |
| 142 |
Capabilities: [58] Debug port: BAR=1 offset=00a0 |
| 143 |
Capabilities: [98] PCIe advanced features <?> |
| 144 |
Kernel driver in use: ehci_hcd |
| 145 |
|
| 146 |
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 147 |
UHCI Controller #1 (rev 03) |
| 148 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 149 |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 150 |
Stepping- SERR- FastB2B- DisINTx- |
| 151 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 152 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 153 |
Latency: 0 |
| 154 |
Interrupt: pin A routed to IRQ 23 |
| 155 |
Region 4: I/O ports at cf00 [size=32] |
| 156 |
Capabilities: [50] PCIe advanced features <?> |
| 157 |
Kernel driver in use: uhci_hcd |
| 158 |
|
| 159 |
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 160 |
UHCI Controller #2 (rev 03) |
| 161 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 162 |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 163 |
Stepping- SERR- FastB2B- DisINTx- |
| 164 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 165 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 166 |
Latency: 0 |
| 167 |
Interrupt: pin B routed to IRQ 19 |
| 168 |
Region 4: I/O ports at cee0 [size=32] |
| 169 |
Capabilities: [50] PCIe advanced features <?> |
| 170 |
Kernel driver in use: uhci_hcd |
| 171 |
|
| 172 |
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB |
| 173 |
UHCI Controller #3 (rev 03) |
| 174 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 175 |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 176 |
Stepping- SERR- FastB2B- DisINTx- |
| 177 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 178 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 179 |
Latency: 0 |
| 180 |
Interrupt: pin C routed to IRQ 18 |
| 181 |
Region 4: I/O ports at cec0 [size=32] |
| 182 |
Capabilities: [50] PCIe advanced features <?> |
| 183 |
Kernel driver in use: uhci_hcd |
| 184 |
|
| 185 |
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 |
| 186 |
EHCI Controller #1 (rev 03) (prog-if 20) |
| 187 |
Subsystem: Toshiba America Info Systems Device 0001 |
| 188 |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- |
| 189 |
Stepping- SERR- FastB2B- DisINTx- |
| 190 |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
| 191 |
<TAbort- <MAbort- >SERR- <PERR- INTx- |
| 192 |
Latency: 0 |
| 193 |
Interrupt: pin A routed to IRQ 23 |
| 194 |
Region 0: Memory at ffcfc000 (32-bit, non-prefetchable) [size=1K] |
| 195 |
Capabilities: [50] Power Management version 2 |
| 196 |
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA |
| 197 |
PME(D0+,D1-,D2-,D3hot+,D3cold+) |
| 198 |
Status: D0 PME-Enable- DSel=0 DScale=0 PME- |
| 199 |
Capabilities: [58] Debug port: BAR=1 offset=00a0 |
| 200 |
Capabilities: [98] PCIe advanced features <?> |
| 201 |
Kernel driver in use: ehci_hcd |
| 202 |
|
| 203 |
|
| 204 |
Leandro. |
Archives