1 |
ok im installing gentoo on a gateway laptop mx7515 |
2 |
|
3 |
ok im gona start with what works and how i started my install |
4 |
i started install off of ubunto linux live cd (supported unboard net-work |
5 |
card )im using no highmem support in 32bit build |
6 |
|
7 |
net =after had gentoo installed i downloaded the network driver to patch |
8 |
kernel from vendor so ehternet will work lspci of network card |
9 |
|
10 |
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast |
11 |
Ethernet Controller (rev 10) |
12 |
|
13 |
video = use newest atidriver from www.ati.com install and compile manualy may |
14 |
have to setup links for fglrx module so modprobe sees it enable agp support |
15 |
so it works ( note laptop is pcie but driver dont build correct without agp ) |
16 |
i started my ati mess with trying to use emerge ati-drivers this will hard |
17 |
lock system with current drivers inorder to get video do not compile agp |
18 |
support i was only able to get 2d support (agp support with stable drivers |
19 |
hard lock system ) note you can not use a gui login manager aswell it will |
20 |
hard lock system whrn you exit to log in as another user soloution to this is |
21 |
to use startx only ..... (note no frame buffer vesa or redaon is built in |
22 |
kernel ) (please get nvdia based video card they work much bettter ) |
23 |
|
24 |
sound= works with ati-ixp driver must mute external amp switch to get sound |
25 |
power management= the cpu power control works fine suspend |
26 |
|
27 |
moving now to things that dont work or do yet dont ..... |
28 |
|
29 |
usb = usb 1.1 works but usb2 does not appear to work i really need help with |
30 |
this problem . ok according to everything usb2.0 looks good and should work |
31 |
at the bottomof this email is lspci dmesg and dmesg when hooking up a usb2 |
32 |
device and output . notice in the dmesg it says that there is 8 ports found |
33 |
on usb2.0 hub and 4 port on usb 1.1 this laptop only has 4 usb ports |
34 |
|
35 |
wireless = used ndiswrapper emerge ndiswrapper fails download and compile and |
36 |
install from source works but complains that i should enable 16k stack kernel |
37 |
i pulled the drivers from the first cd that you make in gateways crappy |
38 |
backup program i got to the point that it sees the hardware loads and the |
39 |
light lights up once changing the mode to ad-hoc i can see my wireless ap i |
40 |
can sett the essid to the correct name but cant connect . this is something i |
41 |
would like to resolve but usb is more important. this may also have something |
42 |
todo with acpi not working the correct way unknown i dont know to much about |
43 |
acpi to tell |
44 |
|
45 |
acpi = acpi seems to work but computer has a MSFT acpi on it i have found a |
46 |
page that recomends to fix it and it may help with some problems using intels |
47 |
acpi compilier spitsout some errors and warings if someone would like to help |
48 |
me fix this i would be willing to provide any information . i dont really |
49 |
know how to make the changes to patch my acpi but if someone would help i |
50 |
would give them any information the laptop procides |
51 |
|
52 |
system time = the clock seems to become out of sync very fast i would like to |
53 |
resolve this problem to with apic enabled the clocks supper fast ie screen |
54 |
saver set for 40 mins came on in 5 mins etc |
55 |
|
56 |
it seems this laptop uses ati's chipset for board related things and it seems |
57 |
to be newly supported so maybe things will imporve |
58 |
|
59 |
system stats |
60 |
amd64 4000+ (32bit mode for now ) |
61 |
1gig memory (not using highmem) |
62 |
100 gb hard drive |
63 |
dvdrw cdrw drive |
64 |
wireless (ndiswrapper only .... not working) |
65 |
ethernet working with source from syskonects website |
66 |
usb only 1.1 usb2 >? |
67 |
media card slots = unknown |
68 |
power management = unknown cpu throtaling works (k8 ) |
69 |
video works with bugs ati x600 pcie 1080x800 screen |
70 |
sound works with mute /unmute of external amp channel |
71 |
|
72 |
|
73 |
|
74 |
lspci |
75 |
0000:00:00.0 Host bridge: ATI Technologies Inc ATI Radeon Xpress 200 |
76 |
(RS480/RS482/RX480/RX482) Chipset - Host bridge (rev 01) |
77 |
0000:00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port |
78 |
0000:00:06.0 PCI bridge: ATI Technologies Inc: Unknown device 5a38 |
79 |
0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host |
80 |
Controller |
81 |
0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host |
82 |
Controller |
83 |
0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host |
84 |
Controller |
85 |
0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) |
86 |
0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE |
87 |
Controller ATI |
88 |
0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge |
89 |
0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge |
90 |
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 |
91 |
Audio Controller (rev 02) |
92 |
0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller |
93 |
(rev 02) |
94 |
0000:01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon |
95 |
Mobility X600] |
96 |
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast |
97 |
Ethernet Controller (rev 10) |
98 |
0000:03:05.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev |
99 |
01) |
100 |
0000:03:07.0 Network controller: Broadcom Corporation BCM4318 [AirForce One |
101 |
54g] 802.11g Wireless LAN Controller (rev 02) |
102 |
0000:03:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host |
103 |
Controller (rev 80) |
104 |
|
105 |
dmesg |
106 |
Linux version 2.6.14-gentoo-r2 (root@amd64laptop) (gcc version 3.3.5-20050130 |
107 |
(Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #9 PREEMPT Thu |
108 |
Dec 1 07:01:09 UTC 2005 |
109 |
BIOS-provided physical RAM map: |
110 |
BIOS-e820: 0000000000000000 - 000000000009e000 (usable) |
111 |
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) |
112 |
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) |
113 |
BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) |
114 |
BIOS-e820: 000000003fe90000 - 000000003fea4000 (ACPI data) |
115 |
BIOS-e820: 000000003fea4000 - 000000003ff00000 (ACPI NVS) |
116 |
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) |
117 |
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
118 |
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) |
119 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
120 |
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) |
121 |
Warning only 896MB will be used. |
122 |
Use a HIGHMEM enabled kernel. |
123 |
896MB LOWMEM available. |
124 |
On node 0 totalpages: 229376 |
125 |
DMA zone: 4096 pages, LIFO batch:1 |
126 |
Normal zone: 225280 pages, LIFO batch:31 |
127 |
HighMem zone: 0 pages, LIFO batch:1 |
128 |
DMI present. |
129 |
ACPI: RSDP (v000 PTLTD ) @ 0x000f84e0 |
130 |
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fe9f0ce |
131 |
ACPI: FADT (v001 GATEWA W730-K8x 0x06040000 ATI 0x000f4240) @ 0x3fea3d9c |
132 |
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x3fea3e10 |
133 |
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ |
134 |
0x3fea3f6a |
135 |
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x3fea3fc4 |
136 |
ACPI: DSDT (v001 GATEWA W730-K8x 0x06040000 MSFT 0x0100000e) @ 0x00000000 |
137 |
ACPI: PM-Timer IO Port: 0x8008 |
138 |
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) |
139 |
Built 1 zonelists |
140 |
Kernel command line: root=/dev/hda5 noapic |
141 |
Initializing CPU#0 |
142 |
PID hash table entries: 4096 (order: 12, 65536 bytes) |
143 |
Detected 2587.415 MHz processor. |
144 |
Using pmtmr for high-res timesource |
145 |
Console: colour VGA+ 80x25 |
146 |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
147 |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
148 |
Memory: 904560k/917504k available (3119k kernel code, 12488k reserved, 960k |
149 |
data, 172k init, 0k highmem) |
150 |
Checking if this processor honours the WP bit even in supervisor mode... Ok. |
151 |
Calibrating delay using timer specific routine.. 5181.78 BogoMIPS |
152 |
(lpj=10363577) |
153 |
Mount-cache hash table entries: 512 |
154 |
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 |
155 |
00000001 00000000 00000001 |
156 |
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 |
157 |
00000000 00000001 |
158 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
159 |
CPU: L2 Cache: 1024K (64 bytes/line) |
160 |
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 |
161 |
00000000 00000001 |
162 |
Intel machine check architecture supported. |
163 |
Intel machine check reporting enabled on CPU#0. |
164 |
mtrr: v2.0 (20020519) |
165 |
CPU: AMD Mobile AMD Athlon(tm) 64 Processor 4000+ stepping 02 |
166 |
Enabling fast FPU save and restore... done. |
167 |
Enabling unmasked SIMD FPU exception support... done. |
168 |
Checking 'hlt' instruction... OK. |
169 |
ACPI: setting ELCR to 0200 (from 0c80) |
170 |
NET: Registered protocol family 16 |
171 |
ACPI: bus type pci registered |
172 |
PCI: PCI BIOS revision 2.10 entry at 0xfd80b, last bus=4 |
173 |
PCI: Using MMCONFIG |
174 |
ACPI: Subsystem revision 20050902 |
175 |
ACPI: Interpreter enabled |
176 |
ACPI: Using PIC for interrupt routing |
177 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
178 |
PCI: Probing PCI hardware (bus 00) |
179 |
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 |
180 |
Boot video device is 0000:01:00.0 |
181 |
PCI: Transparent bridge - 0000:00:14.4 |
182 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
183 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT] |
184 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] |
185 |
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11) |
186 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *7 |
187 |
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) |
188 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) |
189 |
ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11), disabled. |
190 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. |
191 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. |
192 |
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11) |
193 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] |
194 |
ACPI: Embedded Controller [EC] (gpe 24) |
195 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
196 |
pnp: PnP ACPI init |
197 |
pnp: PnP ACPI: found 9 devices |
198 |
PnPBIOS: Disabled by ACPI PNP |
199 |
SCSI subsystem initialized |
200 |
usbcore: registered new driver usbfs |
201 |
usbcore: registered new driver hub |
202 |
PCI: Using ACPI for IRQ routing |
203 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report |
204 |
pnp: 00:07: ioport range 0x1080-0x1080 has been reserved |
205 |
pnp: 00:07: ioport range 0x200-0x20f has been reserved |
206 |
pnp: 00:07: ioport range 0x87f-0x87f has been reserved |
207 |
pnp: 00:07: ioport range 0x220-0x22f has been reserved |
208 |
PCI: Bridge: 0000:00:02.0 |
209 |
IO window: 9000-9fff |
210 |
MEM window: c0000000-c00fffff |
211 |
PREFETCH window: c8000000-cfffffff |
212 |
PCI: Bridge: 0000:00:06.0 |
213 |
IO window: a000-afff |
214 |
MEM window: c0100000-c01fffff |
215 |
PREFETCH window: disabled. |
216 |
PCI: Bus 4, cardbus bridge: 0000:03:05.0 |
217 |
IO window: 0000b400-0000b4ff |
218 |
IO window: 0000b800-0000b8ff |
219 |
PREFETCH window: 50000000-51ffffff |
220 |
MEM window: 52000000-53ffffff |
221 |
PCI: Bridge: 0000:00:14.4 |
222 |
IO window: b000-bfff |
223 |
MEM window: c0200000-c02fffff |
224 |
PREFETCH window: 50000000-51ffffff |
225 |
PCI: Setting latency timer of device 0000:00:02.0 to 64 |
226 |
PCI: Setting latency timer of device 0000:00:06.0 to 64 |
227 |
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 |
228 |
PCI: setting IRQ 11 as level-triggered |
229 |
ACPI: PCI Interrupt 0000:03:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> |
230 |
IRQ 11 |
231 |
Machine check exception polling timer started. |
232 |
audit: initializing netlink socket (disabled) |
233 |
audit(1133525604.724:1): initialized |
234 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
235 |
Initializing Cryptographic API |
236 |
PCI: Setting latency timer of device 0000:00:02.0 to 64 |
237 |
pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS |
238 |
assign_interrupt_mode Found MSI capability |
239 |
Allocate Port Service[pcie00] |
240 |
Allocate Port Service[pcie01] |
241 |
PCI: Setting latency timer of device 0000:00:06.0 to 64 |
242 |
pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS |
243 |
assign_interrupt_mode Found MSI capability |
244 |
Allocate Port Service[pcie00] |
245 |
Allocate Port Service[pcie01] |
246 |
lp: driver loaded but no devices found |
247 |
Linux agpgart interface v0.101 (c) Dave Jones |
248 |
ACPI: AC Adapter [AC] (on-line) |
249 |
ACPI: Battery Slot [BAT0] (battery present) |
250 |
ACPI: Power Button (FF) [PWRF] |
251 |
ACPI: Power Button (CM) [PWRB] |
252 |
ACPI: Sleep Button (CM) [SLPB] |
253 |
ACPI: Lid Switch [LID] |
254 |
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) |
255 |
ACPI: Processor [CPU0] (supports 8 throttling states) |
256 |
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 |
257 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
258 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
259 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled |
260 |
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> |
261 |
IRQ 11 |
262 |
ACPI: PCI interrupt for device 0000:00:14.6 disabled |
263 |
mice: PS/2 mouse device common for all mice |
264 |
io scheduler noop registered |
265 |
io scheduler anticipatory registered |
266 |
io scheduler deadline registered |
267 |
io scheduler cfq registered |
268 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
269 |
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008 |
270 |
input: SynPS/2 Synaptics TouchPad on isa0060/serio1 |
271 |
floppy0: no floppy controllers found |
272 |
Linux video capture interface: v1.00 |
273 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
274 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
275 |
ATIIXP: IDE controller at PCI slot 0000:00:14.1 |
276 |
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 |
277 |
PCI: setting IRQ 10 as level-triggered |
278 |
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> |
279 |
IRQ 10 |
280 |
ATIIXP: chipset revision 0 |
281 |
ATIIXP: not 100% native mode: will probe irqs later |
282 |
ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio |
283 |
ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio |
284 |
Probing IDE interface ide0... |
285 |
hda: HTS541010G9AT00, ATA DISK drive |
286 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
287 |
Probing IDE interface ide1... |
288 |
hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive |
289 |
ide1 at 0x170-0x177,0x376 on irq 15 |
290 |
hda: max request size: 1024KiB |
291 |
hda: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, |
292 |
UDMA(100) |
293 |
hda: cache flushes supported |
294 |
hda: hda1 hda2 hda3 < hda5 > |
295 |
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) |
296 |
Uniform CD-ROM driver Revision: 3.20 |
297 |
libata version 1.12 loaded. |
298 |
usbmon: debugfs is not available |
299 |
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 |
300 |
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> |
301 |
IRQ 11 |
302 |
ehci_hcd 0000:00:13.2: EHCI Host Controller |
303 |
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 |
304 |
ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0502000 |
305 |
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 |
306 |
hub 1-0:1.0: USB hub found |
307 |
hub 1-0:1.0: 8 ports detected |
308 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
309 |
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> |
310 |
IRQ 11 |
311 |
ohci_hcd 0000:00:13.0: OHCI Host Controller |
312 |
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 |
313 |
ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0500000 |
314 |
hub 2-0:1.0: USB hub found |
315 |
hub 2-0:1.0: 4 ports detected |
316 |
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> |
317 |
IRQ 11 |
318 |
ohci_hcd 0000:00:13.1: OHCI Host Controller |
319 |
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 |
320 |
ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0501000 |
321 |
hub 3-0:1.0: USB hub found |
322 |
hub 3-0:1.0: 4 ports detected |
323 |
Initializing USB Mass Storage driver... |
324 |
usbcore: registered new driver usb-storage |
325 |
USB Mass Storage support registered. |
326 |
usbcore: registered new driver usbhid |
327 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
328 |
Advanced Linux Sound Architecture Driver Version 1.0.10rc1 (Mon Sep 12 |
329 |
08:13:09 2005 UTC). |
330 |
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> |
331 |
IRQ 11 |
332 |
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> |
333 |
IRQ 11 |
334 |
atiixp-modem: no codec available |
335 |
ACPI: PCI interrupt for device 0000:00:14.6 disabled |
336 |
ALSA device list: |
337 |
#0: ATI IXP rev 2 with unknown codec at 0xc0503400, irq 11 |
338 |
NET: Registered protocol family 2 |
339 |
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) |
340 |
TCP established hash table entries: 131072 (order: 7, 524288 bytes) |
341 |
TCP bind hash table entries: 65536 (order: 6, 262144 bytes) |
342 |
TCP: Hash tables configured (established 131072 bind 65536) |
343 |
TCP reno registered |
344 |
ip_conntrack version 2.3 (7168 buckets, 57344 max) - 216 bytes per conntrack |
345 |
ip_tables: (C) 2000-2002 Netfilter core team |
346 |
ipt_recent v0.3.1: Stephen Frost <sfrost@×××××××.net>. |
347 |
http://snowman.net/projects/ipt_recent/ |
348 |
arp_tables: (C) 2002 David S. Miller |
349 |
TCP bic registered |
350 |
NET: Registered protocol family 1 |
351 |
NET: Registered protocol family 17 |
352 |
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) |
353 |
powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 (1350 mV) |
354 |
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa (1300 mV) |
355 |
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc (1250 mV) |
356 |
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe (1200 mV) |
357 |
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 (1150 mV) |
358 |
powernow-k8: 5 : fid 0x8 (1600 MHz), vid 0x12 (1100 mV) |
359 |
powernow-k8: 6 : fid 0x0 (800 MHz), vid 0x18 (950 mV) |
360 |
cpu_init done, current fid 0x12, vid 0x8 |
361 |
Using IPI Shortcut mode |
362 |
ACPI wakeup devices: |
363 |
SLPB LID LAN0 MODM |
364 |
ACPI: (supports S0 S3 S4 S5) |
365 |
ReiserFS: hda5: found reiserfs format "3.6" with standard journal |
366 |
ReiserFS: hda5: using ordered data mode |
367 |
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block |
368 |
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 |
369 |
ReiserFS: hda5: checking transaction log (hda5) |
370 |
ReiserFS: hda5: Using r5 hash to sort names |
371 |
VFS: Mounted root (reiserfs filesystem) readonly. |
372 |
Freeing unused kernel memory: 172k freed |
373 |
Adding 1951856k swap on /dev/hda1. Priority:-1 extents:1 across:1951856k |
374 |
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 |
375 |
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> |
376 |
IRQ 10 |
377 |
sk98lin: Network Device Driver v8.28.1.3 |
378 |
(C)Copyright 1999-2005 Marvell(R). |
379 |
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> |
380 |
IRQ 10 |
381 |
PCI: Setting latency timer of device 0000:02:00.0 to 64 |
382 |
eth0: Marvell Yukon 88E8036 Fast Ethernet Controller |
383 |
PrefPort:A RlmtMode:Check Link State |
384 |
input: PC Speaker |
385 |
spurious 8259A interrupt: IRQ7. |
386 |
eth0: network connection up using port A |
387 |
speed: 100 |
388 |
autonegotiation: yes |
389 |
duplex mode: half |
390 |
flowctrl: none |
391 |
irq moderation: disabled |
392 |
tcp offload: enabled |
393 |
scatter-gather: enabled |
394 |
tx-checksum: enabled |
395 |
rx-checksum: enabled |
396 |
eth0: SkYuk2RestartRxBmu failed. |
397 |
eth0: SkYuk2RestartRxBmu failed. |
398 |
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, |
399 |
GERMANY' taints kernel. |
400 |
[fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes. |
401 |
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> |
402 |
IRQ 10 |
403 |
[fglrx] module loaded - fglrx 8.19.10 [Nov 9 2005] on minor 0 |
404 |
[fglrx] ACPI power management is initialized. |
405 |
[fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes. |
406 |
[fglrx] free PCIe = 54804480 |
407 |
[fglrx] max PCIe = 54804480 |
408 |
[fglrx] free LFB = 48558080 |
409 |
[fglrx] max LFB = 48558080 |
410 |
[fglrx] free Inv = 0 |
411 |
[fglrx] max Inv = 0 |
412 |
[fglrx] total Inv = 0 |
413 |
[fglrx] total TIM = 0 |
414 |
[fglrx] total FB = 0 |
415 |
[fglrx] total PCIe = 16384 |
416 |
|
417 |
dmesg of (last part) input of new usb 2.0 device pretty much the same on any |
418 |
of the 4 ports of the laptop notice that it says not using high speed mode |
419 |
connect to high speed hub i really need to get usb 2.0 working i have alot of |
420 |
backup data on usb hard drives . note usb2 may have worked in ubuntu / |
421 |
kumbuntu |
422 |
|
423 |
usb 2-2: new full speed USB device using ohci_hcd and address 2 |
424 |
usb 2-2: not running at top speed; connect to a high speed hub |
425 |
scsi0 : SCSI emulation for USB Mass Storage devices |
426 |
usb-storage: device found at 2 |
427 |
usb-storage: waiting for device to settle before scanning |
428 |
Vendor: Maxtor 6 Model: B200P0 Rev: 0 0 |
429 |
Type: Direct-Access ANSI SCSI revision: 00 |
430 |
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) |
431 |
sda: assuming drive cache: write through |
432 |
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) |
433 |
sda: assuming drive cache: write through |
434 |
sda: sda1 sda2 |
435 |
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 |
436 |
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 |
437 |
|
438 |
on another note i really miss my old laptop with nvidia chipset that bestbuy |
439 |
sent to wrong address and i got this one to replace it ............ |
440 |
everything worked on that even the wireless card ..... |
441 |
|
442 |
-- |
443 |
life is linux |
444 |
linux is life |
445 |
-- |
446 |
gentoo-user@g.o mailing list |