| 1 |
Hi All, |
| 2 |
I just upgraded to sys-kernel/tuxonice-sources-2.6.26 kernel. Everything |
| 3 |
was working fine before but now my bcm4401 ethernet card stopped working. |
| 4 |
I tried booting in my old kernel and card is working fine with old |
| 5 |
kernel. |
| 6 |
|
| 7 |
Could someone help to solve this problem ? |
| 8 |
|
| 9 |
|
| 10 |
|
| 11 |
My dmesg snippet and some useful info are below. |
| 12 |
|
| 13 |
<snip> |
| 14 |
b44: eth0: Link is up at 100 Mbps, full duplex. |
| 15 |
b44: eth0: Flow control is off for TX and off for RX. |
| 16 |
b44: eth0: powering down PHY |
| 17 |
</snip> |
| 18 |
|
| 19 |
|
| 20 |
Card |
| 21 |
==== |
| 22 |
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev |
| 23 |
02) |
| 24 |
|
| 25 |
Driver |
| 26 |
===== |
| 27 |
flukebox@flukebox ~ $ modinfo b44 |
| 28 |
filename: /lib/modules/2.6.26-tuxonice/kernel/drivers/net/b44.ko |
| 29 |
version: 2.0 |
| 30 |
license: GPL |
| 31 |
description: Broadcom 44xx/47xx 10/100 PCI ethernet driver |
| 32 |
author: Felix Fietkau, Florian Schirmer, Pekka Pietikainen, David S. |
| 33 |
Miller |
| 34 |
srcversion: AC42292194F1E7451BB40C6 |
| 35 |
alias: ssb:v4243id0806rev* |
| 36 |
alias: pci:v000014E4d0000170Csv*sd*bc*sc*i* |
| 37 |
alias: pci:v000014E4d00004402sv*sd*bc*sc*i* |
| 38 |
alias: pci:v000014E4d00004401sv*sd*bc*sc*i* |
| 39 |
depends: mii |
| 40 |
vermagic: 2.6.26-tuxonice SMP mod_unload modversions CORE2 |
| 41 |
parm: b44_debug:B44 bitmapped debugging message enable value (int) |
| 42 |
|
| 43 |
|
| 44 |
Kernel |
| 45 |
===== |
| 46 |
flukebox@flukebox ~ $ uname -a |
| 47 |
Linux flukebox 2.6.26-tuxonice #6 SMP Sun Dec 14 00:55:06 IST 2008 i686 |
| 48 |
Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz GenuineIntel GNU/Linux |
Archives