| 1 |
Neil Bothwick wrote: |
| 2 |
> On Tue, 30 Mar 2010 11:00:06 -0500, Dale wrote: |
| 3 |
> |
| 4 |
> |
| 5 |
>>> K3b is running mkisofs and growisofs at the same time, hence the |
| 6 |
>>> mixed up debug output making it hard to see where the error is coming |
| 7 |
>>> from. Take the media, drive and growisofs out of the equation by |
| 8 |
>>> getting K3b to create an ISO image instead. If that works, write the |
| 9 |
>>> image to disc with |
| 10 |
>>> |
| 11 |
>>> growisofs -dvd-compat -Z /dev/dvd=/path/to/file.iso |
| 12 |
>>> |
| 13 |
>>> At least you'll have a better idea where the problem lies. |
| 14 |
>>> |
| 15 |
>>> |
| 16 |
>>> |
| 17 |
>> Could I just get rid of one of the programs or are they all part of the |
| 18 |
>> same package? I suspect a mismatch of package versions which is why I |
| 19 |
>> went unstable with k3b and cdrtools. |
| 20 |
>> |
| 21 |
>> It is odd that it is trying to run two programs at the same time tho. |
| 22 |
>> |
| 23 |
> Not really, mkisofs is creating the ISO data and growisofs is writing it |
| 24 |
> to the disc. Basically, the output of mkisofs is piped through growisofs |
| 25 |
> to the disc. The alternative is to write an ISO image file and then burn |
| 26 |
> it to disc, which is slower but what I suggested to see where the problem |
| 27 |
> lies. |
| 28 |
> |
| 29 |
> |
| 30 |
> |
| 31 |
|
| 32 |
OK. I went back to k3b and tried to burn a Gentoo install disc which is |
| 33 |
a iso image. This is what it gives when I do that. |
| 34 |
|
| 35 |
Devices |
| 36 |
----------------------- |
| 37 |
Optiarc DVD RW AD-7200A 1.05 (/dev/hdd, CD-R, CD-RW, CD-ROM, DVD-ROM, |
| 38 |
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R |
| 39 |
Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, |
| 40 |
DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R |
| 41 |
Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, |
| 42 |
RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] |
| 43 |
|
| 44 |
System |
| 45 |
----------------------- |
| 46 |
K3b Version: 1.91.0 |
| 47 |
KDE Version: 4.4.1 (KDE 4.4.1) |
| 48 |
QT Version: 4.6.2 |
| 49 |
Kernel: 2.6.30-gentoo-r8 |
| 50 |
|
| 51 |
Used versions |
| 52 |
----------------------- |
| 53 |
cdrecord: 2.1.1a77 |
| 54 |
|
| 55 |
cdrecord |
| 56 |
----------------------- |
| 57 |
scsidev: '/dev/hdd' |
| 58 |
devname: '/dev/hdd' |
| 59 |
scsibus: -2 target: -2 lun: -2 |
| 60 |
Warning: Open by 'devname' is unintentional and not supported. |
| 61 |
Linux sg driver version: 3.5.27 |
| 62 |
SCSI buffer size: 64512 |
| 63 |
/usr/bin/cdrecord: Warning: Cannot read drive buffer. |
| 64 |
/usr/bin/cdrecord: Warning: The DMA speed test has been skipped. |
| 65 |
Cdrecord-ProDVD-ProBD-Clone 2.01.01a77 (i686-pc-linux-gnu) Copyright (C) |
| 66 |
1995-2010 Jörg Schilling |
| 67 |
TOC Type: 1 = CD-ROM |
| 68 |
Using libscg version 'schily-0.9'. |
| 69 |
Driveropts: 'burnfree' |
| 70 |
atapi: 1 |
| 71 |
Device type : Removable CD-ROM |
| 72 |
Version : 0 |
| 73 |
Response Format: 2 |
| 74 |
Capabilities : |
| 75 |
Vendor_info : 'Optiarc ' |
| 76 |
Identifikation : 'DVD RW AD-7200A ' |
| 77 |
Revision : '1.05' |
| 78 |
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. |
| 79 |
Current: DVD+RW |
| 80 |
Profile: DVD+R/DL |
| 81 |
Profile: DVD+R |
| 82 |
Profile: DVD+RW (current) |
| 83 |
Profile: DVD-R/DL layer jump recording |
| 84 |
Profile: DVD-R/DL sequential recording |
| 85 |
Profile: DVD-RW sequential recording |
| 86 |
Profile: DVD-RW restricted overwrite |
| 87 |
Profile: DVD-RAM |
| 88 |
Profile: DVD-R sequential recording |
| 89 |
Profile: DVD-ROM |
| 90 |
Profile: CD-RW |
| 91 |
Profile: CD-R |
| 92 |
Profile: CD-ROM |
| 93 |
Profile: Removable Disk |
| 94 |
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw). |
| 95 |
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE |
| 96 |
Supported modes: PACKET SAO LAYER_JUMP |
| 97 |
Drive buf size : 1245184 = 1216 KB |
| 98 |
FIFO size : 4194304 = 4096 KB |
| 99 |
Track 01: data 2591 MB |
| 100 |
Total size: 2591 MB = 1326592 sectors |
| 101 |
Current Secsize: 2048 |
| 102 |
Trying to clear drive status. |
| 103 |
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 968512 |
| 104 |
Reducing transfer size from 64512 to 32768 bytes. |
| 105 |
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. |
| 106 |
Last chance to quit, starting real write in 3 seconds. |
| 107 |
2 seconds. |
| 108 |
1 seconds. |
| 109 |
0 seconds. Operation starts. |
| 110 |
Waiting for reader process to fill input buffer ... input buffer ready. |
| 111 |
Starting new track at sector: 0 |
| 112 |
Track 02: 0 of 2591 MB written. |
| 113 |
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error |
| 114 |
CDB: 2A 00 00 00 00 00 00 00 10 00 |
| 115 |
status: 0x2 (CHECK CONDITION) |
| 116 |
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 |
| 117 |
Sense Key: 0x3 Medium Error, Segment 0 |
| 118 |
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 |
| 119 |
Sense flags: Blk 0 (not valid) |
| 120 |
resid: 32768 |
| 121 |
cmd finished after 17.339s timeout 200s |
| 122 |
/usr/bin/cdrecord: A write error occured. |
| 123 |
/usr/bin/cdrecord: Please properly read the error message above. |
| 124 |
write track data: error after 0 bytes |
| 125 |
Writing time: 22.358s |
| 126 |
Average write speed 87.7x. |
| 127 |
Fixating... |
| 128 |
Fixating time: 0.003s |
| 129 |
/usr/bin/cdrecord: fifo had 128 puts and 1 gets. |
| 130 |
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was |
| 131 |
100%. |
| 132 |
BURN-Free was not used. |
| 133 |
|
| 134 |
cdrecord command: |
| 135 |
----------------------- |
| 136 |
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=4 -sao |
| 137 |
driveropts=burnfree -data -tsize=1326592s - |
| 138 |
|
| 139 |
|
| 140 |
This appears to be using cdrecord. Any ideas? Should I shoot it? lol |
| 141 |
|
| 142 |
Dale |
| 143 |
|
| 144 |
:-) :-) |
Archives