1 |
Hi list! |
2 |
|
3 |
I'm having constant troubles with Iomega REV 35GB ATAPI (so internal) |
4 |
drives in a couple of Gentoo servers and I was hoping for some hints. |
5 |
|
6 |
About the environment: |
7 |
|
8 |
Kernel: gentoo-sources 2.6.15-gentoo-r1 with |
9 |
CONFIG_UDF_FS=m |
10 |
CONFIG_UDF_NLS=y |
11 |
CONFIG_CDROM_PKTCDVD=m |
12 |
CONFIG_CDROM_PKTCDVD_BUFFERS=8 |
13 |
CONFIG_IDE=y |
14 |
CONFIG_BLK_DEV_IDE=y |
15 |
CONFIG_BLK_DEV_IDEDISK=y |
16 |
CONFIG_IDEDISK_MULTI_MODE=y |
17 |
CONFIG_BLK_DEV_IDECD=y |
18 |
|
19 |
Motherboard: Intel D945GNT (Pentium D) with most recent BIOS |
20 |
Drives: 2 SATA drives (RAID-1), 2 Iomega REV 35GB ATAPI drives (firmware |
21 |
v99b)) on the single IDE port, nothing else. |
22 |
|
23 |
Both drives worked instantly for quite some time. Transfer rates could |
24 |
have been better but since they are only used for daily backups in the |
25 |
background I don't care that much. |
26 |
|
27 |
Now where's the problem? After a couple of days one or even both drives |
28 |
start having troubles reading inserted media and flooding the kernel log |
29 |
with following errors: |
30 |
|
31 |
: |
32 |
Feb 1 04:26:56 srv2001 kernel: hda: media error (bad sector): |
33 |
status=0x51 { DriveReady SeekComplete Error } |
34 |
Feb 1 04:26:56 srv2001 kernel: hda: media error (bad sector): |
35 |
error=0x30 { LastFailedSense=0x03 } |
36 |
Feb 1 04:26:56 srv2001 kernel: ide: failed opcode was: unknown |
37 |
Feb 1 04:26:56 srv2001 kernel: end_request: I/O error, dev hda, sector |
38 |
4607392 |
39 |
: |
40 |
: |
41 |
Feb 1 04:26:56 srv2001 kernel: isofs_fill_super: bread failed, dev=hda, |
42 |
iso_blknum=16, block=16 |
43 |
Feb 1 04:26:58 srv2001 kernel: UDF-fs INFO UDF 0.9.8.1 (2004/29/09) |
44 |
Mounting volume 'REV 35', timestamp 2004/03/25 19:55 (103c) |
45 |
: |
46 |
: |
47 |
Feb 2 04:27:51 srv2001 kernel: UDF-fs: No partition found (1) |
48 |
Feb 2 04:27:51 srv2001 kernel: hdb: media error (bad sector): |
49 |
status=0x51 { DriveReady SeekComplete Error } |
50 |
Feb 2 04:27:51 srv2001 kernel: hdb: media error (bad sector): |
51 |
error=0x30 { LastFailedSense=0x03 } |
52 |
Feb 2 04:27:51 srv2001 kernel: ide: failed opcode was: unknown |
53 |
Feb 2 04:27:51 srv2001 kernel: end_request: I/O error, dev hdb, sector |
54 |
64 |
55 |
Feb 2 04:27:51 srv2001 kernel: isofs_fill_super: bread failed, dev=hdb, |
56 |
iso_blknum=16, block=16 |
57 |
|
58 |
This behavior seems to be totally independent from the used media. |
59 |
Rejected media will work in another machine or even in the external USB |
60 |
drive I attached for testing. It's even quite likely that "bad" media |
61 |
will work the next day. And before I forget: rebooting always helps ;-) |
62 |
|
63 |
What I have done so far: |
64 |
|
65 |
1. Re-loading the UDF-module before mounting. Helped a little. |
66 |
2. Used IDE-SCSI emulation. Couldn't mount the drives at all. |
67 |
3. Compiled IDE-CD as module. Couldn't mount the drives at all. |
68 |
4. Tried to use Packet Writing. Makes no difference since the problems |
69 |
start with mounting. If I am able to mount a drive it'll work rock solid |
70 |
from my experience. |
71 |
5. Checked http://iomrrdtools.sourceforge.net/ |
72 |
6. Checked http://sourceforge.net/projects/linux-udf |
73 |
|
74 |
So finally I am stuck. Any hint / advice is higly apprechiated. |
75 |
|
76 |
-- |
77 |
Mit freundlichen Grüßen |
78 |
|
79 |
Heinz Sporn |
80 |
|
81 |
SPORN it-freelancing |
82 |
|
83 |
Mobile: ++43 (0)699 / 127 827 07 |
84 |
Email: heinz.sporn@××××××××.com |
85 |
heinz.sporn@×××××.at |
86 |
Website: http://www.sporn-it.com |
87 |
Snail: Steyrer Str. 20 |
88 |
A-4540 Bad Hall |
89 |
Austria / Europe |
90 |
|
91 |
-- |
92 |
gentoo-user@g.o mailing list |