1 |
Hello everybody, |
2 |
|
3 |
As a follow up to the thread subj: is harddrive kaput? |
4 |
the cable is fine. |
5 |
|
6 |
All the smartctl selftests return w/ no error. But |
7 |
|
8 |
#smartctl -l error /dev/hdb |
9 |
|
10 |
Home page is http://smartmontools.sourceforge.net/ |
11 |
|
12 |
=== START OF READ SMART DATA SECTION === |
13 |
SMART Error Log Version: 1 |
14 |
Warning: ATA error count 94 inconsistent with error |
15 |
log pointer 5 |
16 |
|
17 |
ATA Error Count: 94 (device log contains only the most |
18 |
recent five errors) |
19 |
CR = Command Register [HEX] |
20 |
FR = Features Register [HEX] |
21 |
SC = Sector Count Register [HEX] |
22 |
SN = Sector Number Register [HEX] |
23 |
CL = Cylinder Low Register [HEX] |
24 |
CH = Cylinder High Register [HEX] |
25 |
DH = Device/Head Register [HEX] |
26 |
DC = Device Command Register [HEX] |
27 |
ER = Error register [HEX] |
28 |
ST = Status register [HEX] |
29 |
Powered_Up_Time is measured from power on, and printed |
30 |
as |
31 |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
32 |
SS=sec, and sss=millisec. It "wraps" after 49.710 |
33 |
days. |
34 |
|
35 |
Error 94 occurred at disk power-on lifetime: 1425 |
36 |
hours (59 days + 9 hours) |
37 |
When the command that caused the error occurred, the |
38 |
device was in an unknown$ |
39 |
|
40 |
After command completion occurred, registers were: |
41 |
ER ST SC SN CL CH DH |
42 |
-- -- -- -- -- -- -- |
43 |
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = |
44 |
0x00000000 = 0 |
45 |
|
46 |
Commands leading to the command that caused the |
47 |
error were: |
48 |
CR FR SC SN CL CH DH DC Powered_Up_Time |
49 |
Command/Feature_Name |
50 |
-- -- -- -- -- -- -- -- ---------------- |
51 |
-------------------- |
52 |
c8 00 08 00 00 00 f0 08 00:05:07.920 READ DMA |
53 |
c8 00 08 00 00 00 f0 08 00:05:07.840 READ DMA |
54 |
10 00 3f 00 00 00 f0 08 00:05:07.824 |
55 |
RECALIBRATE [OBS-4] |
56 |
c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA |
57 |
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA |
58 |
|
59 |
Error 93 occurred at disk power-on lifetime: 1425 |
60 |
hours (59 days + 9 hours) |
61 |
When the command that caused the error occurred, the |
62 |
device was in an unknown$ |
63 |
|
64 |
After command completion occurred, registers were: |
65 |
ER ST SC SN CL CH DH |
66 |
-- -- -- -- -- -- -- |
67 |
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = |
68 |
0x00000000 = 0 |
69 |
|
70 |
Commands leading to the command that caused the |
71 |
error were: |
72 |
CR FR SC SN CL CH DH DC Powered_Up_Time |
73 |
Command/Feature_Name |
74 |
-- -- -- -- -- -- -- -- ---------------- |
75 |
-------------------- |
76 |
c8 00 08 00 00 00 f0 08 00:05:07.840 READ DMA |
77 |
10 00 3f 00 00 00 f0 08 00:05:07.824 |
78 |
RECALIBRATE [OBS-4] |
79 |
c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA |
80 |
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA |
81 |
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA |
82 |
|
83 |
Error 92 occurred at disk power-on lifetime: 1425 |
84 |
hours (59 days + 9 hours) |
85 |
When the command that caused the error occurred, the |
86 |
device was in an unknown$ |
87 |
|
88 |
After command completion occurred, registers were: |
89 |
ER ST SC SN CL CH DH |
90 |
-- -- -- -- -- -- -- |
91 |
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = |
92 |
0x00000000 = 0 |
93 |
|
94 |
Commands leading to the command that caused the |
95 |
error were: |
96 |
CR FR SC SN CL CH DH DC Powered_Up_Time |
97 |
Command/Feature_Name |
98 |
-- -- -- -- -- -- -- -- ---------------- |
99 |
-------------------- |
100 |
c8 00 08 00 00 00 f0 08 00:05:07.760 READ DMA |
101 |
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA |
102 |
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA |
103 |
10 00 3f 00 00 00 f0 08 00:05:07.584 |
104 |
RECALIBRATE [OBS-4] |
105 |
91 00 3f 3f ff 3f ff 08 00:05:07.584 |
106 |
INITIALIZE DEVICE PARAMETERS [OBS-$ |
107 |
|
108 |
Error 91 occurred at disk power-on lifetime: 1425 |
109 |
hours (59 days + 9 hours) |
110 |
When the command that caused the error occurred, the |
111 |
device was in an unknown$ |
112 |
|
113 |
After command completion occurred, registers were: |
114 |
ER ST SC SN CL CH DH |
115 |
-- -- -- -- -- -- -- |
116 |
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = |
117 |
0x00000000 = 0 |
118 |
|
119 |
Commands leading to the command that caused the |
120 |
error were: |
121 |
CR FR SC SN CL CH DH DC Powered_Up_Time |
122 |
Command/Feature_Name |
123 |
-- -- -- -- -- -- -- -- ---------------- |
124 |
-------------------- |
125 |
c8 00 08 00 00 00 f0 08 00:05:07.696 READ DMA |
126 |
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA |
127 |
10 00 3f 00 00 00 f0 08 00:05:07.584 |
128 |
RECALIBRATE [OBS-4] |
129 |
91 00 3f 3f ff 3f ff 08 00:05:07.584 |
130 |
INITIALIZE DEVICE PARAMETERS [OBS-$ |
131 |
ef 03 44 00 00 00 f0 0e 00:05:07.552 SET |
132 |
FEATURES [Set transfer mode] |
133 |
|
134 |
Error 90 occurred at disk power-on lifetime: 1425 |
135 |
hours (59 days + 9 hours) |
136 |
When the command that caused the error occurred, the |
137 |
device was in an unknown$ |
138 |
|
139 |
After command completion occurred, registers were: |
140 |
ER ST SC SN CL CH DH |
141 |
-- -- -- -- -- -- -- |
142 |
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = |
143 |
0x00000000 = 0 |
144 |
|
145 |
Commands leading to the command that caused the |
146 |
error were: |
147 |
CR FR SC SN CL CH DH DC Powered_Up_Time |
148 |
Command/Feature_Name |
149 |
-- -- -- -- -- -- -- -- ---------------- |
150 |
-------------------- |
151 |
c8 00 08 00 00 00 f0 08 00:05:07.616 READ DMA |
152 |
10 00 3f 00 00 00 f0 08 00:05:07.584 |
153 |
RECALIBRATE [OBS-4] |
154 |
91 00 3f 3f ff 3f ff 08 00:05:07.584 |
155 |
INITIALIZE DEVICE PARAMETERS [OBS-$ |
156 |
ef 03 44 00 00 00 f0 0e 00:05:07.552 SET |
157 |
FEATURES [Set transfer mode] |
158 |
ef 03 44 00 00 00 f0 0a 00:05:07.552 SET |
159 |
FEATURES [Set transfer mode] |
160 |
|
161 |
Can somebody explain this discrepancy and are there |
162 |
four errors here or just one repeated four times? |
163 |
What's my next move? |
164 |
|
165 |
-mw |
166 |
|
167 |
|
168 |
|
169 |
__________________________________ |
170 |
Yahoo! Music Unlimited |
171 |
Access over 1 million songs. Try it free. |
172 |
http://music.yahoo.com/unlimited/ |
173 |
-- |
174 |
gentoo-user@g.o mailing list |