1 |
Early during booting phase, dmesg shows: |
2 |
|
3 |
[ 0.515651] ata6: SATA max UDMA/133 abar m8192@0xfdefe000 port |
4 |
0xfdefe180 irq 17 |
5 |
[ 0.833387] ata6: SATA link down (SStatus 0 SControl 300) |
6 |
|
7 |
But later, it reports lots like the following stanza: |
8 |
|
9 |
[164362.715469] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4000000 |
10 |
action 0xe frozen |
11 |
[164362.715474] ata6: irq_stat 0x00000040, connection status changed |
12 |
[164362.715479] ata6: SError: { DevExch } |
13 |
[164362.715490] ata6: hard resetting link |
14 |
[164363.433615] ata6: SATA link down (SStatus 0 SControl 300) |
15 |
[164363.446934] ata6: EH complete |
16 |
|
17 |
Is it related to a disk drive, and if so, is there a way to know which |
18 |
drive is on ata6? |
19 |
|
20 |
PS: There are two drives attached to the system, reported by dmesg like so: |
21 |
[ 0.872490] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: |
22 |
(80.0 GB/74.5 GiB) |
23 |
[ 0.874828] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 |
24 |
GB/232 GiB) |