| 1 |
Am 20.11.2012 20:08, schrieb Damien Levac: |
| 2 |
> On 11/20/12 13:33, Norman Rieß wrote: |
| 3 |
>> Am 20.11.2012 19:02, schrieb Florian Philipp: |
| 4 |
>>> Am 20.11.2012 14:52, schrieb Norman Rieß: |
| 5 |
>>>> Am 20.11.2012 13:51, schrieb Bruce Hill: |
| 6 |
>>>>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: |
| 7 |
>>>>>> Hello, |
| 8 |
>>>>>> |
| 9 |
>>>>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini |
| 10 |
>>>>>> displayport. |
| 11 |
>>>>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI |
| 12 |
>>>>>> Monitor stays black on boot and it is not visible in xrandr. As if it |
| 13 |
>>>>>> wasn't connected at all. |
| 14 |
>>>>>> Rebooting with 3.5 brings back the Display with full functionality. |
| 15 |
>>>>>> |
| 16 |
>>>>>> All i found about this was a Fedora bugreport stating the issue, but is |
| 17 |
>>>>>> unanswered for a month now. |
| 18 |
>>>>>> |
| 19 |
>>>>>> Does someone got an idea here or faced the same issue and solved it? |
| 20 |
>>>>>> |
| 21 |
>>>>>> Regards, |
| 22 |
>>>>>> Norman |
| 23 |
>>>>> Can you give us a link to: |
| 24 |
>>>>> |
| 25 |
>>>>> (1) the Fedora bug report |
| 26 |
>>>>> (2) your 3.5 kernel .config |
| 27 |
>>>>> (3) your 3.6 (and 3.7rc) kernel .config(s) |
| 28 |
>>>>> |
| 29 |
>>>> Yes. |
| 30 |
>>>> (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 |
| 31 |
>>>> |
| 32 |
>>>> (2) http://smash-net.org/temp/config-3.5.4 |
| 33 |
>>>> (3) http://smash-net.org/temp/config-3.6.6 |
| 34 |
>>>> http://smash-net.org/temp/config-3.7.0-rc6 |
| 35 |
>>>> |
| 36 |
>>>> |
| 37 |
>>>> |
| 38 |
>>> What does `xrandr --current` say? (from x11-apps/xrandr) |
| 39 |
>>> |
| 40 |
>>> Regards, |
| 41 |
>>> Florian Philipp |
| 42 |
>>> |
| 43 |
>> In what situation? 3.5 or 3.6 kernel? |
| 44 |
>> |
| 45 |
> In doubt, both. But I'm fairly sure he meant 3.6 since there are no |
| 46 |
> problem to solve in 3.5. :P |
| 47 |
> |
| 48 |
> Damien |
| 49 |
> |
| 50 |
|
| 51 |
Yeah, i was kinda irritated by that question, as i allready said, that |
| 52 |
xrandr does not show the display. |
| 53 |
3.5 activates the display during kernel loading, on 3.6 it stays shut |
| 54 |
off during the whole boot process. |
| 55 |
|
| 56 |
|
| 57 |
3.6: |
| 58 |
xrandr --current |
| 59 |
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 32767 x 32767 |
| 60 |
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) |
| 61 |
287mm x 180mm |
| 62 |
1440x900 60.0*+ 50.0 |
| 63 |
1024x768 60.0 |
| 64 |
800x600 60.3 56.2 |
| 65 |
640x480 59.9 |
| 66 |
VGA1 disconnected (normal left inverted right x axis y axis) |
| 67 |
HDMI1 disconnected (normal left inverted right x axis y axis) |
| 68 |
DP1 disconnected (normal left inverted right x axis y axis) |
| 69 |
DP2 disconnected (normal left inverted right x axis y axis) |
| 70 |
|
| 71 |
--------------------------------------------- |
| 72 |
3.5 both screens mirrored: |
| 73 |
xrandr --current |
| 74 |
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 32767 x 32767 |
| 75 |
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) |
| 76 |
287mm x 180mm |
| 77 |
1440x900 60.0*+ 50.0 |
| 78 |
1024x768 60.0 |
| 79 |
800x600 60.3 56.2 |
| 80 |
640x480 59.9 |
| 81 |
VGA1 disconnected (normal left inverted right x axis y axis) |
| 82 |
HDMI1 connected 1440x900+0+0 (normal left inverted right x axis y axis) |
| 83 |
518mm x 324mm |
| 84 |
1920x1200 60.0 + |
| 85 |
1600x1200 60.0 |
| 86 |
1680x1050 59.9 |
| 87 |
1680x945 60.0 |
| 88 |
1400x1050 59.9 |
| 89 |
1600x900 60.0 |
| 90 |
1280x1024 60.0 |
| 91 |
1440x900 59.9* |
| 92 |
1280x960 60.0 |
| 93 |
1366x768 60.0 |
| 94 |
1360x768 60.0 |
| 95 |
1280x800 59.9 |
| 96 |
1280x768 60.0 |
| 97 |
1024x768 60.0 |
| 98 |
1024x576 60.0 |
| 99 |
800x600 60.3 56.2 |
| 100 |
848x480 60.0 |
| 101 |
640x480 60.0 |
| 102 |
DP1 disconnected (normal left inverted right x axis y axis) |
| 103 |
DP2 disconnected (normal left inverted right x axis y axis) |
| 104 |
|
| 105 |
--------------------------------------------- |
| 106 |
3.5 in my dualscreen setup: |
| 107 |
xrandr --current |
| 108 |
Screen 0: minimum 320 x 200, current 3360 x 1200, maximum 32767 x 32767 |
| 109 |
LVDS1 connected 1440x900+1920+0 (normal left inverted right x axis y |
| 110 |
axis) 287mm x 180mm |
| 111 |
1440x900 60.0*+ 50.0 |
| 112 |
1024x768 60.0 |
| 113 |
800x600 60.3 56.2 |
| 114 |
640x480 59.9 |
| 115 |
VGA1 disconnected (normal left inverted right x axis y axis) |
| 116 |
HDMI1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) |
| 117 |
518mm x 324mm |
| 118 |
1920x1200 60.0*+ |
| 119 |
1600x1200 60.0 |
| 120 |
1680x1050 59.9 |
| 121 |
1680x945 60.0 |
| 122 |
1400x1050 59.9 |
| 123 |
1600x900 60.0 |
| 124 |
1280x1024 60.0 |
| 125 |
1440x900 59.9 |
| 126 |
1280x960 60.0 |
| 127 |
1366x768 60.0 |
| 128 |
1360x768 60.0 |
| 129 |
1280x800 59.9 |
| 130 |
1280x768 60.0 |
| 131 |
1024x768 60.0 |
| 132 |
1024x576 60.0 |
| 133 |
800x600 60.3 56.2 |
| 134 |
848x480 60.0 |
| 135 |
640x480 60.0 |
| 136 |
DP1 disconnected (normal left inverted right x axis y axis) |
| 137 |
DP2 disconnected (normal left inverted right x axis y axis) |
Archives