Re: [gentoo-user] X server won't load

[Andrey Vul]

dmesg:
Linux version 2.6.22-rc3 (root@andrey-laptop) (gcc version 4.1.2
(Gentoo 4.1.2)) #4 PREEMPT Sun Jun 10 13:34:06 EDT 2007
Command line: root=/dev/hda2 vga=791 ro noapic
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
 BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fea0000 (usable)
 BIOS-e820: 000000003fea0000 - 000000003feae000 (ACPI data)
 BIOS-e820: 000000003feae000 - 000000003ff00000 (ACPI NVS)
 BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 155) 0 entries of 256 used
Entering add_active_range(0, 256, 261792) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F6DB0, 0014 (r0 PTLTD )
ACPI: RSDT 3FEA81AD, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP 3FEADE20, 0074 (r1 ATI    Piranha   6040000 ATI     F4240)
ACPI: DSDT 3FEA81E1, 5C3F (r1    ATI    SB400  6040000 MSFT  100000E)
ACPI: FACS 3FEAEFC0, 0040
ACPI: SSDT 3FEADE94, 00D6 (r1 PTLTD  POWERNOW  6040000  LTP        1)
ACPI: APIC 3FEADF6A, 005A (r1 PTLTD      APIC    6040000  LTP        0)
ACPI: MCFG 3FEADFC4, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
Entering add_active_range(0, 0, 155) 0 entries of 256 used
Entering add_active_range(0, 256, 261792) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      155
    0:      256 ->   261792
On node 0 totalpages: 261691
  DMA zone: 56 pages used for memmap
  DMA zone: 1684 pages reserved
  DMA zone: 2255 pages, LIFO batch:0
  DMA32 zone: 3523 pages used for memmap
  DMA32 zone: 254173 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID:          MPTABLE: Product ID:              MPTABLE:
APIC at: 0xFEE00000
I/O APIC #1 at 0xFEC00000.
Setting APIC routing to flat
Processors: 1
swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists.  Total pages: 256428
Kernel command line: root=/dev/hda2 vga=791 ro noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 1800.088 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ e3fe000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1023768k/1047168k available (3831k kernel code, 22684k
reserved, 2037k data, 224k init)
Calibrating delay using timer specific routine.. 3602.25 BogoMIPS (lpj=1801125)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Turion(tm) 64 Mobile Technology ML-34 stepping 02
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 733 Objects with 61 Devices 239 Methods 24 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
 tbxface-0587 [02] tb_load_namespace     : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0c00)
evxfevnt-0091 [02] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12500620
Detected 12.500 MHz APIC timer.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
evgpeblk-0952 [04] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0
Runtime GPEs in this block
Completing Region/Field/Buffer/Package
initialization:...........................................................................
Initialized 24/24 Regions 0/0 Fields 34/34 Buffers 17/24 Packages (745 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 0 _STA executions (examined 67 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:14.4
PCI: Bus #07 (-#08) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
pnp: 00:08: ioport range 0x1200-0x120f has been reserved
pnp: 00:08: ioport range 0x500-0x51f has been reserved
pnp: 00:08: ioport range 0x40b-0x40b has been reserved
pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:09: iomem range 0x0-0xfff could not be reserved
Time: tsc clocksource has been installed.
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 11 (level,
low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[c0208000-c02087ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:02.0
  IO window: 9000-9fff
  MEM window: c0100000-c01fffff
  PREFETCH window: c8000000-cfffffff
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bus 7, cardbus bridge: 0000:06:06.0
  IO window: 0000a400-0000a4ff
  IO window: 0000a800-0000a8ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 58000000-5bffffff
PCI: Bridge: 0000:00:14.4
  IO window: a000-afff
  MEM window: c0200000-c02fffff
  PREFETCH window: 50000000-55ffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt Link [LNKE] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKE] -> GSI 11 (level,
low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
fuse init (API version 7.8)
JFS: nTxBlock = 8000, nTxLock = 64005
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=400.00 Mhz, System=250.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: CMO
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:00.0): ATI Radeon 1P
ACPI: AC Adapter [ADP1] (on-line)
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[1234567812345678]
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to possible TSC halt in C2
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [TZS0] (71 C)
ACPI: Thermal Zone [TZS1] (46 C)
ACPI: Thermal Zone [TZSV] (47 C)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.27.0 20060524 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:14.6 disabled
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
ACPI: PCI Interrupt 0000:06:06.3[A] -> Link [LNKE] -> GSI 11 (level,
low) -> IRQ 11
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@××××××××.com>
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKH] -> GSI 11 (level,
low) -> IRQ 11
eth0: RTL8169sb/8110sb at 0xffffc200005b6400, 00:0a:e4:e8:19:e7, IRQ 11
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level,
low) -> IRQ 10
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9100822A, ATA DISK drive
hda: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITAUJ-845D, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0002000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0001000
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
spurious 8259A interrupt: IRQ7.
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver
for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
input: PC Speaker as /class/input/input4
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input5
i2c /dev entries driver
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@××××××.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKE] -> GSI 11 (level,
low) -> IRQ 11
mmc0: SDHCI at 0xc0209000 irq 11 DMA
mmc1: SDHCI at 0xc0208c00 irq 11 DMA
mmc2: SDHCI at 0xc0208800 irq 11 DMA
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 16
09:45:46 2007 UTC).
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
MC'97 1 converters and GPIO not ready (0xff00)
ALSA device list:
  #0: ATI IXP rev 2 with ALC655 at 0xc0003400, irq 11
  #1: ATI IXP Modem rev 2 at 0xc0003800, irq 11
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4090 buckets, 32720 max)
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@×××××××××××.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-34
processors (version 2.00.00)
powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4
powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16
UDF-fs: No VRS found
VFS: Mounted root (jfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
bcm43xx driver
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKF] -> GSI 10 (level,
low) -> IRQ 10
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
Adding 1060280k swap on /dev/hda3.  Priority:-1 extents:1 across:1060280k
r8169: eth0: link up
eth0: no IPv6 routers present
usb 1-1: new high speed USB device using ehci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access              MP3 Flash Drive  1.04 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 1015808 512-byte hardware sectors (520 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 1015808 512-byte hardware sectors (520 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
usb 1-1: USB disconnect, address 3
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
(After running startx, when my computer freezes)
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs

/var/log/Xorg.0.log:

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux andrey-laptop 2.6.22-rc3 #4 PREEMPT
Sun Jun 10 13:34:06 EDT 2007 x86_64
Build Date: 09 June 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 10 14:32:28 2007
(==) Using config file: "/root/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "ATI Radeon Mobility X600 64MB"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi,
        /usr/local/share/fonts
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x6cb160
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.2
        X.Org XInput driver : 0.7
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 1025,0080 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 1002,5a38 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1002,5a39 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:13:0: chip 1002,4374 card 1025,0080 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 1025,0080 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 1025,0080 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 1025,0080 rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 1025,0080 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 1025,0080 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:14:5: chip 1002,4370 card 1025,0079 rev 02 class 04,01,00 hdr 80
(II) PCI: 00:14:6: chip 1002,4378 card 1025,0080 rev 02 class 07,03,00 hdr 80
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,3150 card 1025,0080 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:05:0: chip 14e4,4318 card 1468,0311 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 104c,8031 card a400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:06:2: chip 104c,8032 card 1025,0080 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:06:3: chip 104c,8033 card 1025,0080 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:06:4: chip 104c,8034 card 1025,0080 rev 00 class 08,05,00 hdr 80
(II) PCI: 06:07:0: chip 10ec,8169 card 1025,0079 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,9), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1  0       0x00009000 - 0x000090ff (0x100) IX[B]
        [1] -1  0       0x00009400 - 0x000094ff (0x100) IX[B]
        [2] -1  0       0x00009800 - 0x000098ff (0x100) IX[B]
        [3] -1  0       0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0       0xc0100000 - 0xc01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1  0       0xc8000000 - 0xcfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:6:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:7:0), (0,4,5), BCTRL: 0x0000 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:20:4), (0,6,8), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 6 I/O range:
        [0] -1  0       0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 6 non-prefetchable memory range:
        [0] -1  0       0xc0200000 - 0xc02fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
        [0] -1  0       0x50000000 - 0x55ffffff (0x6000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:6:0), (6,7,8), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
        [0] -1  0       0x0000a400 - 0x0000a4ff (0x100) IX[B]
        [1] -1  0       0x0000a800 - 0x0000a8ff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
        [0] -1  0       0x50000000 - 0x53ffffff (0x4000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc M24 1P [Radeon Mobility X600]
rev 0, Mem @ 0xc8000000/27, 0xc0100000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x100000000) MX[B]
        [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0       0xc0209400 - 0xc02094ff (0x100) MX[B]
        [1] -1  0       0xc0208800 - 0xc02088ff (0x100) MX[B]
        [2] -1  0       0xc0208c00 - 0xc0208cff (0x100) MX[B]
        [3] -1  0       0xc0209000 - 0xc02090ff (0x100) MX[B]
        [4] -1  0       0xc0206000 - 0xc0207fff (0x2000) MX[B]
        [5] -1  0       0xc0200000 - 0xc0203fff (0x4000) MX[B]
        [6] -1  0       0xc0208000 - 0xc02087ff (0x800) MX[B]
        [7] -1  0       0xc0204000 - 0xc0205fff (0x2000) MX[B]
        [8] -1  0       0xc0003800 - 0xc00038ff (0x100) MX[B]
        [9] -1  0       0xc0003400 - 0xc00034ff (0x100) MX[B]
        [10] -1 0       0xc0003000 - 0xc00033ff (0x400) MX[B]
        [11] -1 0       0xc0002000 - 0xc0002fff (0x1000) MX[B]
        [12] -1 0       0xc0001000 - 0xc0001fff (0x1000) MX[B]
        [13] -1 0       0xc0000000 - 0xc0000fff (0x1000) MX[B]
        [14] -1 0       0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
        [15] -1 0       0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [16] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [17] -1 0       0x00008410 - 0x0000841f (0x10) IX[B]
        [18] -1 0       0x00000374 - 0x00000374 (0x1) IX[B]
        [19] -1 0       0x00000170 - 0x00000177 (0x8) IX[B]
        [20] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[B]
        [21] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1 0       0x00008400 - 0x0000840f (0x10) IX[B]
        [23] -1 0       0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xc0209400 - 0xc02094ff (0x100) MX[B]
        [1] -1  0       0xc0208800 - 0xc02088ff (0x100) MX[B]
        [2] -1  0       0xc0208c00 - 0xc0208cff (0x100) MX[B]
        [3] -1  0       0xc0209000 - 0xc02090ff (0x100) MX[B]
        [4] -1  0       0xc0206000 - 0xc0207fff (0x2000) MX[B]
        [5] -1  0       0xc0200000 - 0xc0203fff (0x4000) MX[B]
        [6] -1  0       0xc0208000 - 0xc02087ff (0x800) MX[B]
        [7] -1  0       0xc0204000 - 0xc0205fff (0x2000) MX[B]
        [8] -1  0       0xc0003800 - 0xc00038ff (0x100) MX[B]
        [9] -1  0       0xc0003400 - 0xc00034ff (0x100) MX[B]
        [10] -1 0       0xc0003000 - 0xc00033ff (0x400) MX[B]
        [11] -1 0       0xc0002000 - 0xc0002fff (0x1000) MX[B]
        [12] -1 0       0xc0001000 - 0xc0001fff (0x1000) MX[B]
        [13] -1 0       0xc0000000 - 0xc0000fff (0x1000) MX[B]
        [14] -1 0       0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
        [15] -1 0       0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [16] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [17] -1 0       0x00008410 - 0x0000841f (0x10) IX[B]
        [18] -1 0       0x00000374 - 0x00000374 (0x1) IX[B]
        [19] -1 0       0x00000170 - 0x00000177 (0x8) IX[B]
        [20] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[B]
        [21] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1 0       0x00008400 - 0x0000840f (0x10) IX[B]
        [23] -1 0       0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0xc0209400 - 0xc02094ff (0x100) MX[B]
        [5] -1  0       0xc0208800 - 0xc02088ff (0x100) MX[B]
        [6] -1  0       0xc0208c00 - 0xc0208cff (0x100) MX[B]
        [7] -1  0       0xc0209000 - 0xc02090ff (0x100) MX[B]
        [8] -1  0       0xc0206000 - 0xc0207fff (0x2000) MX[B]
        [9] -1  0       0xc0200000 - 0xc0203fff (0x4000) MX[B]
        [10] -1 0       0xc0208000 - 0xc02087ff (0x800) MX[B]
        [11] -1 0       0xc0204000 - 0xc0205fff (0x2000) MX[B]
        [12] -1 0       0xc0003800 - 0xc00038ff (0x100) MX[B]
        [13] -1 0       0xc0003400 - 0xc00034ff (0x100) MX[B]
        [14] -1 0       0xc0003000 - 0xc00033ff (0x400) MX[B]
        [15] -1 0       0xc0002000 - 0xc0002fff (0x1000) MX[B]
        [16] -1 0       0xc0001000 - 0xc0001fff (0x1000) MX[B]
        [17] -1 0       0xc0000000 - 0xc0000fff (0x1000) MX[B]
        [18] -1 0       0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
        [19] -1 0       0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [21] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [22] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [23] -1 0       0x00008410 - 0x0000841f (0x10) IX[B]
        [24] -1 0       0x00000374 - 0x00000374 (0x1) IX[B]
        [25] -1 0       0x00000170 - 0x00000177 (0x8) IX[B]
        [26] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[B]
        [27] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [28] -1 0       0x00008400 - 0x0000840f (0x10) IX[B]
        [29] -1 0       0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.3.0, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 4.2.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "ati"
(II) Loading /usr/lib64/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 6.6.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.1.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.1.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
        ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
        ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
        ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
        ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
        ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
        ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
        ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
        ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
        ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
        ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
        ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
        ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
        ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
        ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
        ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
        ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
        ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
        ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
        ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
        ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
        ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
        ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
        ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
        ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
        ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
        ATI Radeon IGP330/340/350 (A4) 4137,
        ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
        ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP),
        ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
        ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
        ATI FireGL RV360 AV (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
        ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
        ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
        ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
        ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
        ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE),
        ATI Radeon Mobility X600 (M24) 3150 (PCIE),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE),
        ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
        ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
        ATI Radeon AIW X800 VE (R420) JT (AGP),
        ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
        ATI Radeon X850 5D4C (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility X600 (M24) 3150 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0xc0209400 - 0xc02094ff (0x100) MX[B]
        [5] -1  0       0xc0208800 - 0xc02088ff (0x100) MX[B]
        [6] -1  0       0xc0208c00 - 0xc0208cff (0x100) MX[B]
        [7] -1  0       0xc0209000 - 0xc02090ff (0x100) MX[B]
        [8] -1  0       0xc0206000 - 0xc0207fff (0x2000) MX[B]
        [9] -1  0       0xc0200000 - 0xc0203fff (0x4000) MX[B]
        [10] -1 0       0xc0208000 - 0xc02087ff (0x800) MX[B]
        [11] -1 0       0xc0204000 - 0xc0205fff (0x2000) MX[B]
        [12] -1 0       0xc0003800 - 0xc00038ff (0x100) MX[B]
        [13] -1 0       0xc0003400 - 0xc00034ff (0x100) MX[B]
        [14] -1 0       0xc0003000 - 0xc00033ff (0x400) MX[B]
        [15] -1 0       0xc0002000 - 0xc0002fff (0x1000) MX[B]
        [16] -1 0       0xc0001000 - 0xc0001fff (0x1000) MX[B]
        [17] -1 0       0xc0000000 - 0xc0000fff (0x1000) MX[B]
        [18] -1 0       0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
        [19] -1 0       0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [21] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [22] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [23] -1 0       0x00008410 - 0x0000841f (0x10) IX[B]
        [24] -1 0       0x00000374 - 0x00000374 (0x1) IX[B]
        [25] -1 0       0x00000170 - 0x00000177 (0x8) IX[B]
        [26] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[B]
        [27] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [28] -1 0       0x00008400 - 0x0000840f (0x10) IX[B]
        [29] -1 0       0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) resource ranges after probing:
        [0] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0xc0209400 - 0xc02094ff (0x100) MX[B]
        [5] -1  0       0xc0208800 - 0xc02088ff (0x100) MX[B]
        [6] -1  0       0xc0208c00 - 0xc0208cff (0x100) MX[B]
        [7] -1  0       0xc0209000 - 0xc02090ff (0x100) MX[B]
        [8] -1  0       0xc0206000 - 0xc0207fff (0x2000) MX[B]
        [9] -1  0       0xc0200000 - 0xc0203fff (0x4000) MX[B]
        [10] -1 0       0xc0208000 - 0xc02087ff (0x800) MX[B]
        [11] -1 0       0xc0204000 - 0xc0205fff (0x2000) MX[B]
        [12] -1 0       0xc0003800 - 0xc00038ff (0x100) MX[B]
        [13] -1 0       0xc0003400 - 0xc00034ff (0x100) MX[B]
        [14] -1 0       0xc0003000 - 0xc00033ff (0x400) MX[B]
        [15] -1 0       0xc0002000 - 0xc0002fff (0x1000) MX[B]
        [16] -1 0       0xc0001000 - 0xc0001fff (0x1000) MX[B]
        [17] -1 0       0xc0000000 - 0xc0000fff (0x1000) MX[B]
        [18] -1 0       0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
        [19] -1 0       0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [20] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [21] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [22] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [23] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [24] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [25] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [26] -1 0       0x00008410 - 0x0000841f (0x10) IX[B]
        [27] -1 0       0x00000374 - 0x00000374 (0x1) IX[B]
        [28] -1 0       0x00000170 - 0x00000177 (0x8) IX[B]
        [29] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[B]
        [30] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [31] -1 0       0x00008400 - 0x0000840f (0x10) IX[B]
        [32] -1 0       0x00009000 - 0x000090ff (0x100) IX[B](B)
        [33] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [34] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xc0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility X600 (M24) 3150 (PCIE)"
(ChipID = 0x3150)
(--) RADEON(0): Linear framebuffer at 0xc8000000
(II) RADEON(0): PCIE card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel
module version 1.27.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"

(II) Loading /usr/lib64/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K
(PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
 Monitor   -- LVDS
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- Proprietary
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- NONE
 DDC Type  -- NONE
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000
max=47394964151360; xclk=25000
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: CMO
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1280x800
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Valid mode using on-chip RMX: 640x480
(II) RADEON(0): Total number of valid FP mode(s) found: 4
(--) RADEON(0): Virtual size is 1280x800 (pitch 1280)
(**) RADEON(0): *Mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "1280x800"   71.00  1280 1328 1360 1440  800
803 809 823
(**) RADEON(0): *Mode "1024x768": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "1024x768"   71.00  1024 1328 1360 1440  768
803 809 823
(**) RADEON(0): *Mode "800x600": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "800x600"   71.00  800 1328 1360 1440  600 803 809 823
(**) RADEON(0): *Mode "640x480": 71.0 MHz (scaled from 0.0 MHz), 49.3
kHz, 59.9 Hz
(II) RADEON(0): Modeline "640x480"   71.00  640 1328 1360 1440  480 803 809 823
(**) RADEON(0):  Default mode "640x350": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "640x350"   71.00  640 1328 1360 1440  350 803 809 823
(**) RADEON(0):  Default mode "640x400": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "640x400"   71.00  640 1328 1360 1440  400 803 809 823
(**) RADEON(0):  Default mode "720x400": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "720x400"   71.00  720 1328 1360 1440  400 803 809 823
(**) RADEON(0):  Default mode "832x624": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "832x624"   71.00  832 1328 1360 1440  624 803 809 823
(**) RADEON(0):  Default mode "1152x768": 71.0 MHz (scaled from 0.0
MHz), 49.3 kHz, 59.9 Hz
(II) RADEON(0): Modeline "1152x768"   71.00  1152 1328 1360 1440  768
803 809 823
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
        of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xc0100000 - 0xc010ffff (0x10000) MX[B]
        [1] 0   0       0xc8000000 - 0xcfffffff (0x8000000) MX[B]
        [2] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [3] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [4] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [5] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [6] -1  0       0xc0209400 - 0xc02094ff (0x100) MX[B]
        [7] -1  0       0xc0208800 - 0xc02088ff (0x100) MX[B]
        [8] -1  0       0xc0208c00 - 0xc0208cff (0x100) MX[B]
        [9] -1  0       0xc0209000 - 0xc02090ff (0x100) MX[B]
        [10] -1 0       0xc0206000 - 0xc0207fff (0x2000) MX[B]
        [11] -1 0       0xc0200000 - 0xc0203fff (0x4000) MX[B]
        [12] -1 0       0xc0208000 - 0xc02087ff (0x800) MX[B]
        [13] -1 0       0xc0204000 - 0xc0205fff (0x2000) MX[B]
        [14] -1 0       0xc0003800 - 0xc00038ff (0x100) MX[B]
        [15] -1 0       0xc0003400 - 0xc00034ff (0x100) MX[B]
        [16] -1 0       0xc0003000 - 0xc00033ff (0x400) MX[B]
        [17] -1 0       0xc0002000 - 0xc0002fff (0x1000) MX[B]
        [18] -1 0       0xc0001000 - 0xc0001fff (0x1000) MX[B]
        [19] -1 0       0xc0000000 - 0xc0000fff (0x1000) MX[B]
        [20] -1 0       0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
        [21] -1 0       0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [22] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
        [23] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
        [24] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
        [25] 0  0       0x00009000 - 0x000090ff (0x100) IX[B]
        [26] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [27] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [28] -1 0       0x0000a000 - 0x0000a0ff (0x100) IX[B]
        [29] -1 0       0x00008410 - 0x0000841f (0x10) IX[B]
        [30] -1 0       0x00000374 - 0x00000374 (0x1) IX[B]
        [31] -1 0       0x00000170 - 0x00000177 (0x8) IX[B]
        [32] -1 0       0x000003f4 - 0x000003f4 (0x1) IX[B]
        [33] -1 0       0x000001f0 - 0x000001f7 (0x8) IX[B]
        [34] -1 0       0x00008400 - 0x0000840f (0x10) IX[B]
        [35] -1 0       0x00009000 - 0x000090ff (0x100) IX[B](B)
        [36] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [37] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit c8000000 0
(**) RADEON(0): Map: 0xc8000000, 0x04000000
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x708488)
(**) RADEON(0): Read: 0x00180006 0x0002003f 0x00000000
(**) RADEON(0): Read: rd=6, fd=63, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x708488
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0x1efff000
(II) RADEON(0): [drm] mapped SAREA 0x1efff000 to 0x2b1bc8ff9000
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [pci] 8192 kB allocated with handle 0x016ad200
(II) RADEON(0): [pci] ring handle = 0x1f000000
(II) RADEON(0): [pci] Ring mapped at 0x2b1bc8ffb000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x2efff000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x2b1bc90fc000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1f001000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x2b1bc90fd000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1f002000
(II) RADEON(0): [pci] GART Texture map mapped at 0x2b1bc92fd000
(II) RADEON(0): [drm] register handle = 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0):   mem_size         : 0x04000000
(**) RADEON(0):   MC_FB_LOCATION   : 0xcbffc800
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x800       71.00  1280 1328 1360 1440   800  803  809  823 (24,32)
1280x800       71.00  1280 1328 1360 1440   800  803  809  823 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Disabled
(**) RADEON(0): RADEONInit returns 0x708e38
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x708e38)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0):   MC_FB_LOCATION   : 0xcbffc800
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20157c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,800) to (1280,802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7389
(II) RADEON(0): Will use back buffer at offset 0x102c000
(II) RADEON(0): Will use depth buffer at offset 0x1414000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x3ff8000
(II) RADEON(0): Will use 40960 kb for textures at offset 0x17fc000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI PCIGART param
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7385
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no
information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib64/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib64/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc102"
(**) Keyboard1: XkbModel: "pc102"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "XkbOptions" "ctrl:ctrl_aa,caps:capslock"
(**) Keyboard1: XkbOptions: "ctrl:ctrl_aa,caps:capslock"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded

/etc/X11/xorg.conf:
# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath    "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc/"
#    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xorg"
    Option "XkbModel"   "acpi"
    Option "XkbLayout"  "us"
    Option "XkbOptions"
"ctrl:ctrl_aa,caps:capslock,altwin:meta_alt,compose:menu"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "Auto" # Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Laptop LCD Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 64.3

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks     25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "ATI Xpress 200M 64MB"
    Driver      "vga"
        # unsupported card
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "ATI Xpress 200M 64MB"
    Monitor     "Laptop LCD Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

emerge --info:
Portage 2.1.2.9 (default-linux/amd64/2007.0/desktop, gcc-4.1.2,
glibc-2.5-r3, 2.6.22-rc3 x86_64)
=================================================================
System uname: 2.6.22-rc3 x86_64 AMD Turion(tm) 64 Mobile Technology ML-34
Gentoo Base System release 1.12.10
Timestamp of tree: Wed, 06 Jun 2007 01:30:01 +0000
dev-java/java-config: 1.3.7, 2.0.33-r1
dev-lang/python:     2.4.4-r4
dev-python/pycrypto: 2.0.1-r5
sys-apps/sandbox:    1.2.18.1
sys-devel/autoconf:  2.13, 2.61
sys-devel/automake:  1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils:  2.17
sys-devel/gcc-config: 1.3.16
sys-devel/libtool:   1.5.23b
virtual/os-headers:  2.6.21
ACCEPT_KEYWORDS="amd64 ~amd64"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -finline-functions -march=athlon64 -msse3"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config
/usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf
/etc/terminfo /etc/texmf/web2c"
CXXFLAGS="-O2 -pipe -finline-functions -march=athlon64 -msse3"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict
userpriv usersandbox"
GENTOO_MIRRORS="http://adelie.polymtl.ca/
http://gentoo.mirrors.tds.net/gentoo
http://gentoo.osuosl.org/ http://mirrors.acm.cs.rpi.edu/gentoo/
         http://mirror.usu.edu/mirrors/gentoo/
http://gentoo.chem.wisc.edu/gentoo/
http://gentoo.mirrors.pair.com/ http://mirror.datapipe.net/gentoo
           http://gentoo.cites.uiuc.edu/pub/gentoo/
http://distro.ibiblio.org/pub/linux/distributions/gentoo/"
LINGUAS="en en_US"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --delete-after --stats
--timeout=180 --exclude=/distfiles --exclude=/local
--exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow 3dnowext 3ds 64bit 7zip S3TC X Xaw3d a52 aac acct acl acpi
activefilter ada additions adplug adsl agg aiglx alisp alsa amd amd64
amr animgif ansi aoss aotuv apache2 arts artworkextra asf aspnet2
async automount background backtrace bash-completion battery bcmath
bcp bdf berkdb bidi binary-drivers bitmap-fonts bittorrent blas
blender-game branding buttons bzip2 cairo caps cardbus catalogs cdda
cddb cdinstall cdparanoia cdr cdrom charconv chroot cjk cli colordiff
compress connectionstatus console cpio cpufreq cracklib crypt cscope
css cups curl curlwrappers dbus dc1394 dcraw debugger deprecated
depth32 device-mapper directfb discouraged disk-partition divx dmi dnd
doc dri dts dv dvd dvdnav dvdr dvdread editor eds elf elisp emacs
emboss emerald encode epydoc erandom esd evo examples exif expat
extensions extra-cardsets extrafilters faillog fam fame fastcgi fat
fbcon ffmpeg fftw firefox flac flash flexresp flexresp2 fontconfig
fortran ftp fuse gb gcj gconf gd gdbm gif gimp gimpprint glibc-omitfp
glitz gmail gmedia gnome gnutls gphoto2 gpm gstreamer gtalk gtk
gtkhtml guile hal hash hddtemp hfs highlight hpn html httpd ibam iconv
icu idea idn ieee1394 imagemagick inkjar inline ipod ipv6 isdnlog
jabber jack java javascript jbig jce jcs jfs jikes john joystick jpeg
jpeg2k justify kde kdecards kerberos keyring lame lapack latex lcms
ldap leim libcaca libdsk libg++ libnotify libsamplerate libwww live
lm_sensors lzo lzw m17n-lib mad matroska matrox memlimit midi mikmod
mjpeg mmap mmx mmxext mng mod mono mozdevelop mozdom mp3 mp4 mpeg
mplayer mpm-prefork msn mudflap ncurses netpbm network nls nntp nowin
nptl nptlonly ntfs ntlm numeric offensive office ogg ogre
on-the-fly-crypt openal opengl openmp oss pam pam_chroot pam_console
pam_timestamp parse-clocks pascal pcmcia pcntl pcre pda pdf perl
plotutils plugins pmu png pnm povray pppd python qt3 qt3support qt4
quicktime radio radius rar readline realmedia recode reflection regex
reiser4 reiserfs restrict-javascript rtc ruby rubytests samba scanner
sdl sdl-image sdl-sound sensord session sharedext sharedmem shorten
simplexml snmp sockets sound source speex spell spl sse sse2 ssl
stream subtitles subversion svg svgz symlink sysfs szip t1lib tcl tcpd
tetex texteffect tga theora threads tidy tiff timidity tk tokenizer
transcode truetype truetype-fonts type1-fonts ucs2 ucs4 unicode usb
uuencode v4l v4l2 vcd vim vim-syntax vim-with-x vorbis wifi wma wmf
wmp wxwindows x264 xattr xcb xcf xchatdccserver xchattext xcomposite
xemacs xforms xfs xft xim xine xinerama xml xorg xpm xprint
xscreensaver xsl xslt xterm xv xvid xvmc zip zlib" ALSA_CARDS="ali5451
als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370
ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3
trident usb-audio via82xx via82xx-modem ymfpci"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty
extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw
multi null plug rate route share shm softvol" ELIBC="glibc"
INPUT_DEVICES="keyboard mouse synaptics" KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb
ncurses text" LINGUAS="en en_US" USERLAND="GNU" VIDEO_CARDS="dummy
fbdev radeon v4l vesa vga vmware"
Unset:  CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL,
LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS,
PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


X is ignoring every kill signal!
this command does NOT kill X (yes it ignores SIGKILL):
#for a in 1 2 3 4 5 6 7 8 9 11 13 14 15 17 19; do kill -n $a 18068; done

ssh dies after <Magic>I, after the RSE, before the KUB

WTF?!?!?!?
-- 
gentoo-user@g.o mailing list