1 |
Ahhh, |
2 |
|
3 |
Quoting from the Intel 6 Series Chipset pdf... |
4 |
|
5 |
>> The PCH supports the Serial ATA Specification, Revision 3.0. The PCH |
6 |
also supports |
7 |
>> several optional sections of the Serial ATA II: Extensions to Serial ATA |
8 |
1.0 Specification, |
9 |
>> Revision 1.0 (AHCI support is required for some elements). Please see |
10 |
Section 1.3 for |
11 |
>> details on SKU feature availability. |
12 |
|
13 |
So your (newer) Intel Chipset supports the SATA-3 specification. That's |
14 |
probably why you are seeing the issue and I'm not... |
15 |
|
16 |
|
17 |
On 25 February 2015 at 16:16, Bob Wya <bob.mt.wya@×××××.com> wrote: |
18 |
|
19 |
> So this is for my motherboard's (Nehalem - so only one generation before |
20 |
> yours) onboard Intel Host Controller... Only a SATA-2 3Gbit capable device. |
21 |
> |
22 |
> 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA |
23 |
> AHCI Controller (prog-if 01 [AHCI 1.0]) |
24 |
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard |
25 |
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- |
26 |
> ParErr- Stepping- SERR- FastB2B- DisINTx+ |
27 |
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
28 |
> <TAbort- <MAbort- >SERR- <PERR- INTx- |
29 |
> Latency: 0 |
30 |
> Interrupt: pin B routed to IRQ 27 |
31 |
> Region 0: I/O ports at 8c00 [size=8] |
32 |
> Region 1: I/O ports at 8880 [size=4] |
33 |
> Region 2: I/O ports at 8800 [size=8] |
34 |
> Region 3: I/O ports at 8480 [size=4] |
35 |
> Region 4: I/O ports at 8400 [size=32] |
36 |
> Region 5: Memory at f7efc000 (32-bit, non-prefetchable) [size=2K] |
37 |
> Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- |
38 |
> Address: fee00000 Data: 4082 |
39 |
> Capabilities: [70] Power Management version 3 |
40 |
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA |
41 |
> PME(D0-,D1-,D2-,D3hot+,D3cold-) |
42 |
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- |
43 |
> Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 |
44 |
> Capabilities: [b0] PCI Advanced Features |
45 |
> AFCap: TP+ FLR+ |
46 |
> AFCtrl: FLR- |
47 |
> AFStatus: TP- |
48 |
> Kernel driver in use: ahci |
49 |
> |
50 |
> uname -r |
51 |
> 3.19.0-gentoo |
52 |
> |
53 |
> For my Samsung 830 / 850 Pro SSDs I don't see any similar NCQ queuing |
54 |
> error(s) in my boot logs (they are hooked up to the Intel Controller just |
55 |
> now - since I can't connect them to my 6Gbit LSI Controller - arrrggg!!) |
56 |
> |
57 |
> Perhaps this issue is confined to the Samsung EVO lines? |
58 |
> |
59 |
> |
60 |
> On 25 February 2015 at 15:02, Stefan G. Weichinger <lists@×××××.at> wrote: |
61 |
> |
62 |
>> On 25.02.2015 14:18, Bob Wya wrote: |
63 |
>> |
64 |
>> > Just out of interest what make is the Host Controller on your |
65 |
>> > motherboard... Is it a Intel one? Or some crappy addon chipset? Perhaps |
66 |
>> you |
67 |
>> > could post the output of lscpi (with lots of -vvvv flags - just the Host |
68 |
>> > Controller bit)? |
69 |
>> |
70 |
>> |
71 |
>> 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset |
72 |
>> Family SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) |
73 |
>> Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset |
74 |
>> Family |
75 |
>> SATA AHCI Controller |
76 |
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- |
77 |
>> ParErr- |
78 |
>> Stepping- SERR- FastB2B- DisINTx+ |
79 |
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- |
80 |
>> <TAbort- <MAbort- >SERR- <PERR- INTx- |
81 |
>> Latency: 0 |
82 |
>> Interrupt: pin B routed to IRQ 26 |
83 |
>> Region 0: I/O ports at f070 [size=8] |
84 |
>> Region 1: I/O ports at f060 [size=4] |
85 |
>> Region 2: I/O ports at f050 [size=8] |
86 |
>> Region 3: I/O ports at f040 [size=4] |
87 |
>> Region 4: I/O ports at f020 [size=32] |
88 |
>> Region 5: Memory at fb205000 (32-bit, non-prefetchable) [size=2K] |
89 |
>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- |
90 |
>> Address: feeff00c Data: 41d1 |
91 |
>> Capabilities: [70] Power Management version 3 |
92 |
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA |
93 |
>> PME(D0-,D1-,D2-,D3hot+,D3cold-) |
94 |
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- |
95 |
>> Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 |
96 |
>> Capabilities: [b0] PCI Advanced Features |
97 |
>> AFCap: TP+ FLR+ |
98 |
>> AFCtrl: FLR- |
99 |
>> AFStatus: TP- |
100 |
>> Kernel driver in use: ahci |
101 |
>> |
102 |
>> |
103 |
>> |
104 |
>> |
105 |
>> |
106 |
> |
107 |
> |
108 |
> -- |
109 |
> |
110 |
> All the best, |
111 |
> Robert |
112 |
> |
113 |
> |
114 |
|
115 |
|
116 |
-- |
117 |
|
118 |
All the best, |
119 |
Robert |