| 1 |
On Fri, Dec 28, 2007 at 10:18:55AM -0500, Eric Martin wrote: |
| 2 |
> Michael George wrote: |
| 3 |
> > I just upgraded my kernel from 2.6.19 to 2.6.23 and it takes almost a |
| 4 |
> > minute for X to start now. |
| 5 |
> > |
| 6 |
> > I have changed window managers (normally ctwm, tested with twm) with the |
| 7 |
> > same results. I rebooted the 2.6.19 kernel and X fires right up as |
| 8 |
> > expected. Booting back to 2.6.23 and it's excruciatingly long. |
| 9 |
> > |
| 10 |
> > I saw some prior posts which indicated a network problem, but in that |
| 11 |
> > case the OP said that the loopback interface wasn't up. I checked my |
| 12 |
> > system (ifconfig) and both lo and eth0 are up and running. |
| 13 |
|
| 14 |
> I see that you checked if it was up, but have you pinged 127.0.0.1? |
| 15 |
> Also, could you possibly have firewall rules setup blocking things on |
| 16 |
> lo? It's a shot in the dark but sometimes the oddest of problems have |
| 17 |
> the simplest of solutions. |
| 18 |
|
| 19 |
Yes, it's up. However, I think this error is a wild goose... |
| 20 |
|
| 21 |
I rebooted to the 2.6.19 kernel and started X. It came right up, and |
| 22 |
this was the output of "startx > startx.2.6.19 2>&1": |
| 23 |
|
| 24 |
---------------------------------------------------------------------------- |
| 25 |
xauth: creating new authority file /home/george/.serverauth.6547 |
| 26 |
|
| 27 |
|
| 28 |
X Window System Version 1.3.0 |
| 29 |
Release Date: 19 April 2007 |
| 30 |
X Protocol Version 11, Revision 0, Release 1.3 |
| 31 |
Build Operating System: UNKNOWN |
| 32 |
Current Operating System: Linux brego 2.6.19-gentoo-r5 #5 SMP PREEMPT Thu Mar 8 19:16:48 EST 2007 x86_64 |
| 33 |
Build Date: 22 December 2007 |
| 34 |
Before reporting problems, check http://wiki.x.org |
| 35 |
to make sure that you have the latest version. |
| 36 |
Module Loader present |
| 37 |
Markers: (--) probed, (**) from config file, (==) default setting, |
| 38 |
(++) from command line, (!!) notice, (II) informational, |
| 39 |
(WW) warning, (EE) error, (NI) not implemented, (??) unknown. |
| 40 |
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 20:30:12 2007 |
| 41 |
(==) Using config file: "/etc/X11/xorg.conf" |
| 42 |
(II) Module already built-in |
| 43 |
(II) Module already built-in |
| 44 |
(II) Module already built-in |
| 45 |
(II) Module already built-in |
| 46 |
(II) Module already built-in |
| 47 |
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI |
| 48 |
(EE) MGA(0): Need at least 15360 kB video memory at this resolution, bit depth |
| 49 |
(EE) MGA(1): Not initializing the DRI on the second head |
| 50 |
(EE) AIGLX: Screen 0 is not DRI capable |
| 51 |
(EE) AIGLX: Screen 1 is not DRI capable |
| 52 |
Couldn't establish a connection to :9202: IO::Socket::INET: Bad hostname ':9202' |
| 53 |
access control disabled, clients can connect from any host |
| 54 |
SetClientVersion: 0 9 |
| 55 |
ctwm: unable to find bitmap "" |
| 56 |
ctwm: unable to find bitmap "" |
| 57 |
ctwm: unable to find bitmap "" |
| 58 |
X Error: BadWindow (invalid Window parameter) |
| 59 |
Major Opcode: 4 |
| 60 |
fetchmail: background fetchmail at 6646 killed. |
| 61 |
xscreensaver: 20:30:27: SIGHUP received: restarting... |
| 62 |
xscreensaver: 20:30:27: running as george/george (500/500) |
| 63 |
|
| 64 |
|
| 65 |
|
| 66 |
waiting for X server to shut down XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" |
| 67 |
|
| 68 |
after 0 requests (0 known processed) with 0 events remaining. |
| 69 |
|
| 70 |
Console: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 71 |
|
| 72 |
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 73 |
|
| 74 |
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 75 |
|
| 76 |
SchedTerm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 77 |
|
| 78 |
SchedTerm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 79 |
|
| 80 |
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing. |
| 81 |
|
| 82 |
|
| 83 |
|
| 84 |
---------------------------------------------------------------------------- |
| 85 |
|
| 86 |
Notice the "9202" error line. I then rebooted back into 2.6.23 and |
| 87 |
started X with "startx > startx.2.6.23 2>&1". It took 1-2min to for me to get |
| 88 |
my window environment, and here is the output of that run: |
| 89 |
---------------------------------------------------------------------------- |
| 90 |
xauth: creating new authority file /home/george/.serverauth.6950 |
| 91 |
|
| 92 |
|
| 93 |
X Window System Version 1.3.0 |
| 94 |
Release Date: 19 April 2007 |
| 95 |
X Protocol Version 11, Revision 0, Release 1.3 |
| 96 |
Build Operating System: UNKNOWN |
| 97 |
Current Operating System: Linux brego 2.6.23-gentoo-r3 #3 SMP PREEMPT Sun Dec 23 21:35:17 EST 2007 x86_64 |
| 98 |
Build Date: 22 December 2007 |
| 99 |
Before reporting problems, check http://wiki.x.org |
| 100 |
to make sure that you have the latest version. |
| 101 |
Module Loader present |
| 102 |
Markers: (--) probed, (**) from config file, (==) default setting, |
| 103 |
(++) from command line, (!!) notice, (II) informational, |
| 104 |
(WW) warning, (EE) error, (NI) not implemented, (??) unknown. |
| 105 |
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 20:32:51 2007 |
| 106 |
(==) Using config file: "/etc/X11/xorg.conf" |
| 107 |
(II) Module already built-in |
| 108 |
(II) Module already built-in |
| 109 |
(II) Module already built-in |
| 110 |
(II) Module already built-in |
| 111 |
(II) Module already built-in |
| 112 |
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI |
| 113 |
(EE) MGA(0): Need at least 15360 kB video memory at this resolution, bit depth |
| 114 |
(EE) MGA(1): Not initializing the DRI on the second head |
| 115 |
(EE) AIGLX: Screen 0 is not DRI capable |
| 116 |
(EE) AIGLX: Screen 1 is not DRI capable |
| 117 |
Couldn't establish a connection to :9202: IO::Socket::INET: Bad hostname ':9202' |
| 118 |
access control disabled, clients can connect from any host |
| 119 |
SetClientVersion: 0 9 |
| 120 |
ctwm: unable to find bitmap "" |
| 121 |
ctwm: unable to find bitmap "" |
| 122 |
ctwm: unable to find bitmap "" |
| 123 |
X Error: BadWindow (invalid Window parameter) |
| 124 |
Major Opcode: 4 |
| 125 |
fetchmail: background fetchmail at 7049 killed. |
| 126 |
xscreensaver: 20:34:42: SIGHUP received: restarting... |
| 127 |
xscreensaver: 20:34:42: running as george/george (500/500) |
| 128 |
|
| 129 |
|
| 130 |
|
| 131 |
waiting for X server to shut down xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 132 |
|
| 133 |
Console: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 134 |
|
| 135 |
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 136 |
|
| 137 |
SchedTerm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 138 |
|
| 139 |
SchedTerm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" |
| 140 |
|
| 141 |
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing. |
| 142 |
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" |
| 143 |
|
| 144 |
after 0 requests (0 known processed) with 0 events remaining. |
| 145 |
|
| 146 |
|
| 147 |
|
| 148 |
|
| 149 |
---------------------------------------------------------------------------- |
| 150 |
|
| 151 |
Notice there is little difference between them. I think I need to trim |
| 152 |
out my .xinitrc file and see if there is something I'm starting from |
| 153 |
there that is causing the delay with a different kernel... |
| 154 |
|
| 155 |
-- |
| 156 |
-M |
| 157 |
|
| 158 |
There are 10 kinds of people in this world: |
| 159 |
Those who can count in binary and those who cannot. |
| 160 |
|
| 161 |
-- |
| 162 |
gentoo-user@g.o mailing list |
Archives