1 |
On Thu, 2005-11-17 at 22:40 +0530, abhay wrote: |
2 |
> On Thursday 17 Nov 2005 7:36 pm, Michael Sullivan wrote: |
3 |
> >I've just rebuild kernel-2.6.14-gentoo-r2 |
4 |
> Can we have output of |
5 |
> lspci | grep Audio |
6 |
> lsmod | grep snd |
7 |
> emerge -pv alsa-driver |
8 |
> dmesg |
9 |
> |
10 |
> Abhay |
11 |
|
12 |
camille ~ # lspci | grep Audio |
13 |
0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 |
14 |
Family) High Definition Audio Controller (rev 03) |
15 |
|
16 |
|
17 |
camille ~ # lsmod | grep snd |
18 |
snd_pcm_oss 36768 0 |
19 |
snd_mixer_oss 12352 2 snd_pcm_oss |
20 |
snd_seq_oss 22880 0 |
21 |
snd_seq_midi_event 2976 1 snd_seq_oss |
22 |
snd_seq 31024 4 snd_seq_oss,snd_seq_midi_event |
23 |
snd_seq_device 4812 2 snd_seq_oss,snd_seq |
24 |
snd_hda_intel 11248 1 |
25 |
snd_hda_codec 61216 1 snd_hda_intel |
26 |
snd_pcm 49832 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec |
27 |
snd_timer 14500 2 snd_seq,snd_pcm |
28 |
snd 30692 9 |
29 |
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer |
30 |
snd_page_alloc 6312 2 snd_hda_intel,snd_pcm |
31 |
|
32 |
camille ~ # emerge -pv alsa-driver |
33 |
|
34 |
These are the packages that I would merge, in order: |
35 |
|
36 |
Calculating dependencies ...done! |
37 |
[ebuild R ] media-sound/alsa-driver-1.0.10_rc3 +doc +oss 0 kB |
38 |
|
39 |
Total size of downloads: 0 kB |
40 |
|
41 |
camille ~ # dmesg |
42 |
Linux version 2.6.14-gentoo-r2 (root@camille) (gcc version 3.3.6 (Gentoo |
43 |
3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 Thu Nov 17 07:30:09 CST 2005 |
44 |
BIOS-provided physical RAM map: |
45 |
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
46 |
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
47 |
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) |
48 |
BIOS-e820: 0000000000100000 - 000000001f72fc00 (usable) |
49 |
BIOS-e820: 000000001f72fc00 - 000000001f730000 (ACPI NVS) |
50 |
BIOS-e820: 000000001f730000 - 000000001f740000 (ACPI data) |
51 |
BIOS-e820: 000000001f740000 - 000000001f7f0000 (ACPI NVS) |
52 |
BIOS-e820: 000000001f7f0000 - 000000001f800000 (reserved) |
53 |
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
54 |
BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved) |
55 |
BIOS-e820: 00000000fed1c000 - 00000000feda0000 (reserved) |
56 |
0MB HIGHMEM available. |
57 |
503MB LOWMEM available. |
58 |
On node 0 totalpages: 128815 |
59 |
DMA zone: 4096 pages, LIFO batch:1 |
60 |
Normal zone: 124719 pages, LIFO batch:31 |
61 |
HighMem zone: 0 pages, LIFO batch:1 |
62 |
DMI 2.3 present. |
63 |
ACPI: RSDP (v000 ACPIAM ) @ 0x000f4ec0 |
64 |
ACPI: RSDT (v001 INTEL D915GLVG 0x20050722 MSFT 0x00000097) @ |
65 |
0x1f730000 |
66 |
ACPI: FADT (v002 INTEL D915GLVG 0x20050722 MSFT 0x00000097) @ |
67 |
0x1f730200 |
68 |
ACPI: MADT (v001 INTEL D915GLVG 0x20050722 MSFT 0x00000097) @ |
69 |
0x1f730390 |
70 |
ACPI: MCFG (v001 INTEL D915GLVG 0x20050722 MSFT 0x00000097) @ |
71 |
0x1f730400 |
72 |
ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 INTL 0x02002026) @ |
73 |
0x1f736050 |
74 |
ACPI: TCPA (v001 INTEL TBLOEMID 0x00000001 MSFT 0x00000097) @ |
75 |
0x1f7360f0 |
76 |
ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 INTL 0x02002026) @ |
77 |
0x1f736124 |
78 |
ACPI: DSDT (v001 INTEL D915GLVG 0x00000001 INTL 0x02002026) @ |
79 |
0x00000000 |
80 |
Allocating PCI resources starting at 20000000 (gap: 1f800000:c0800000) |
81 |
Built 1 zonelists |
82 |
Kernel command line: real_root=/dev/sda6 |
83 |
Initializing CPU#0 |
84 |
PID hash table entries: 2048 (order: 11, 32768 bytes) |
85 |
Detected 2667.327 MHz processor. |
86 |
Using tsc for high-res timesource |
87 |
Speakup v-2.00 CVS: Wed Oct 26 15:13:02 EDT 2005 : initialized |
88 |
Console: colour VGA+ 80x25 |
89 |
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) |
90 |
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) |
91 |
Memory: 505448k/515260k available (2224k kernel code, 9260k reserved, |
92 |
587k data, 144k init, 0k highmem) |
93 |
Checking if this processor honours the WP bit even in supervisor mode... |
94 |
Ok. |
95 |
Calibrating delay using timer specific routine.. 5342.01 BogoMIPS |
96 |
(lpj=10684026) |
97 |
Mount-cache hash table entries: 512 |
98 |
Couldn't initialize miscdevice /dev/synth. |
99 |
CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 |
100 |
0000451d 00000000 00000000 |
101 |
CPU: After vendor identify, caps: bfebfbff 00100000 00000000 00000000 |
102 |
0000451d 00000000 00000000 |
103 |
monitor/mwait feature present. |
104 |
using mwait in idle threads. |
105 |
CPU: Trace cache: 12K uops, L1 D cache: 16K |
106 |
CPU: L2 cache: 256K |
107 |
CPU: After all inits, caps: bfebfbff 00100000 00000000 00000080 0000451d |
108 |
00000000 00000000 |
109 |
mtrr: v2.0 (20020519) |
110 |
CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 01 |
111 |
Enabling fast FPU save and restore... done. |
112 |
Enabling unmasked SIMD FPU exception support... done. |
113 |
Checking 'hlt' instruction... OK. |
114 |
ACPI: setting ELCR to 0200 (from 0e28) |
115 |
checking if image is initramfs... it is |
116 |
softlockup thread 0 started up. |
117 |
Freeing initrd memory: 1600k freed |
118 |
NET: Registered protocol family 16 |
119 |
EISA bus registered |
120 |
ACPI: bus type pci registered |
121 |
PCI: Using MMCONFIG |
122 |
ACPI: Subsystem revision 20050902 |
123 |
ACPI: Interpreter enabled |
124 |
ACPI: Using PIC for interrupt routing |
125 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
126 |
PCI: Probing PCI hardware (bus 00) |
127 |
Boot video device is 0000:00:02.0 |
128 |
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 |
129 |
PCI: Transparent bridge - 0000:00:1e.0 |
130 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
131 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] |
132 |
ACPI: Power Resource [URP1] (off) |
133 |
ACPI: Power Resource [FDDP] (off) |
134 |
ACPI: Power Resource [LPTP] (off) |
135 |
ACPI: Power Resource [URP2] (off) |
136 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] |
137 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] |
138 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] |
139 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] |
140 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
141 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, |
142 |
disabled. |
143 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) |
144 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
145 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
146 |
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) |
147 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
148 |
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) |
149 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
150 |
pnp: PnP ACPI init |
151 |
pnp: PnP ACPI: found 14 devices |
152 |
SCSI subsystem initialized |
153 |
PCI: Using ACPI for IRQ routing |
154 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a |
155 |
report |
156 |
pnp: 00:0c: ioport range 0x400-0x47f could not be reserved |
157 |
pnp: 00:0c: ioport range 0x680-0x6ff has been reserved |
158 |
pnp: 00:0c: ioport range 0x500-0x53f has been reserved |
159 |
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 |
160 |
PCI: Bridge: 0000:00:1c.0 |
161 |
IO window: disabled. |
162 |
MEM window: ff800000-ff8fffff |
163 |
PREFETCH window: d4300000-d43fffff |
164 |
PCI: Bridge: 0000:00:1c.1 |
165 |
IO window: disabled. |
166 |
MEM window: ff700000-ff7fffff |
167 |
PREFETCH window: d4200000-d42fffff |
168 |
PCI: Bridge: 0000:00:1c.2 |
169 |
IO window: disabled. |
170 |
MEM window: ff600000-ff6fffff |
171 |
PREFETCH window: d4100000-d41fffff |
172 |
PCI: Bridge: 0000:00:1c.3 |
173 |
IO window: disabled. |
174 |
MEM window: ff500000-ff5fffff |
175 |
PREFETCH window: d4000000-d40fffff |
176 |
PCI: Bridge: 0000:00:1e.0 |
177 |
IO window: b000-bfff |
178 |
MEM window: ff900000-ff9fffff |
179 |
PREFETCH window: d0000000-d3ffffff |
180 |
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 |
181 |
PCI: setting IRQ 9 as level-triggered |
182 |
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 9 (level, low) |
183 |
-> IRQ 9 |
184 |
PCI: Setting latency timer of device 0000:00:1c.0 to 64 |
185 |
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 |
186 |
PCI: setting IRQ 11 as level-triggered |
187 |
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, |
188 |
low) -> IRQ 11 |
189 |
PCI: Setting latency timer of device 0000:00:1c.1 to 64 |
190 |
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 |
191 |
PCI: setting IRQ 5 as level-triggered |
192 |
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 5 (level, low) |
193 |
-> IRQ 5 |
194 |
PCI: Setting latency timer of device 0000:00:1c.2 to 64 |
195 |
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 |
196 |
PCI: setting IRQ 10 as level-triggered |
197 |
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 10 (level, |
198 |
low) -> IRQ 10 |
199 |
PCI: Setting latency timer of device 0000:00:1c.3 to 64 |
200 |
PCI: Setting latency timer of device 0000:00:1e.0 to 64 |
201 |
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher |
202 |
SGI XFS with ACLs, security attributes, realtime, large block numbers, |
203 |
no debug enabled |
204 |
SGI XFS Quota Management subsystem |
205 |
Initializing Cryptographic API |
206 |
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 9 (level, low) |
207 |
-> IRQ 9 |
208 |
PCI: Setting latency timer of device 0000:00:1c.0 to 64 |
209 |
assign_interrupt_mode Found MSI capability |
210 |
Allocate Port Service[pcie00] |
211 |
Allocate Port Service[pcie02] |
212 |
Allocate Port Service[pcie03] |
213 |
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, |
214 |
low) -> IRQ 11 |
215 |
PCI: Setting latency timer of device 0000:00:1c.1 to 64 |
216 |
assign_interrupt_mode Found MSI capability |
217 |
Allocate Port Service[pcie00] |
218 |
Allocate Port Service[pcie02] |
219 |
Allocate Port Service[pcie03] |
220 |
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 5 (level, low) |
221 |
-> IRQ 5 |
222 |
PCI: Setting latency timer of device 0000:00:1c.2 to 64 |
223 |
assign_interrupt_mode Found MSI capability |
224 |
Allocate Port Service[pcie00] |
225 |
Allocate Port Service[pcie02] |
226 |
Allocate Port Service[pcie03] |
227 |
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 10 (level, |
228 |
low) -> IRQ 10 |
229 |
PCI: Setting latency timer of device 0000:00:1c.3 to 64 |
230 |
assign_interrupt_mode Found MSI capability |
231 |
Allocate Port Service[pcie00] |
232 |
Allocate Port Service[pcie02] |
233 |
Allocate Port Service[pcie03] |
234 |
isapnp: Scanning for PnP cards... |
235 |
isapnp: No Plug & Play device found |
236 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 |
237 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
238 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
239 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
240 |
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
241 |
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
242 |
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
243 |
mice: PS/2 mouse device common for all mice |
244 |
io scheduler noop registered |
245 |
io scheduler deadline registered |
246 |
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
247 |
loop: loaded (max 8 devices) |
248 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
249 |
ide: Assuming 33MHz system bus speed for PIO modes; override with |
250 |
idebus=xx |
251 |
ICH6: IDE controller at PCI slot 0000:00:1f.1 |
252 |
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) |
253 |
-> IRQ 5 |
254 |
ICH6: chipset revision 3 |
255 |
ICH6: not 100% native mode: will probe irqs later |
256 |
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio |
257 |
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio |
258 |
Probing IDE interface ide0... |
259 |
input: AT Translated Set 2 keyboard on isa0060/serio0 |
260 |
logips2pp: Detected unknown logitech mouse model 85 |
261 |
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 |
262 |
hda: LITE-ON COMBO SOHC-5236K, ATAPI CD/DVD-ROM drive |
263 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
264 |
Probing IDE interface ide1... |
265 |
Probing IDE interface ide1... |
266 |
hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) |
267 |
Uniform CD-ROM driver Revision: 3.20 |
268 |
CAPI Subsystem Rev 1.1.2.8 |
269 |
EISA: Probing bus 0 at eisa.0 |
270 |
EISA: Detected 0 cards. |
271 |
NET: Registered protocol family 2 |
272 |
IP route cache hash table entries: 4096 (order: 2, 16384 bytes) |
273 |
TCP established hash table entries: 16384 (order: 4, 65536 bytes) |
274 |
TCP bind hash table entries: 16384 (order: 4, 65536 bytes) |
275 |
TCP: Hash tables configured (established 16384 bind 16384) |
276 |
TCP reno registered |
277 |
TCP bic registered |
278 |
NET: Registered protocol family 1 |
279 |
NET: Registered protocol family 17 |
280 |
Using IPI Shortcut mode |
281 |
ACPI wakeup devices: |
282 |
PEGP P0P2 AC97 USB0 USB1 USB2 USB3 USB7 UAR1 PEX1 PEX2 PEX3 PEX4 AZAL |
283 |
PWRB |
284 |
ACPI: (supports S0 S1 S4 S5) |
285 |
Freeing unused kernel memory: 144k freed |
286 |
usbcore: registered new driver usbfs |
287 |
usbcore: registered new driver hub |
288 |
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 |
289 |
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 9 (level, low) |
290 |
-> IRQ 9 |
291 |
PCI: Setting latency timer of device 0000:00:1d.7 to 64 |
292 |
ehci_hcd 0000:00:1d.7: EHCI Host Controller |
293 |
ehci_hcd 0000:00:1d.7: debug port 1 |
294 |
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 |
295 |
ehci_hcd 0000:00:1d.7: irq 9, io mem 0xffac4000 |
296 |
PCI: cache line size of 128 is not supported by device 0000:00:1d.7 |
297 |
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec |
298 |
2004 |
299 |
hub 1-0:1.0: USB hub found |
300 |
hub 1-0:1.0: 8 ports detected |
301 |
usbcore: registered new driver hiddev |
302 |
usbcore: registered new driver usbhid |
303 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
304 |
Initializing USB Mass Storage driver... |
305 |
usbcore: registered new driver usb-storage |
306 |
USB Mass Storage support registered. |
307 |
USB Universal Host Controller Interface driver v2.3 |
308 |
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 9 (level, low) |
309 |
-> IRQ 9 |
310 |
PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
311 |
uhci_hcd 0000:00:1d.0: UHCI Host Controller |
312 |
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
313 |
uhci_hcd 0000:00:1d.0: irq 9, io base 0x0000c800 |
314 |
hub 2-0:1.0: USB hub found |
315 |
hub 2-0:1.0: 2 ports detected |
316 |
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, |
317 |
low) -> IRQ 10 |
318 |
PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
319 |
uhci_hcd 0000:00:1d.1: UHCI Host Controller |
320 |
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 |
321 |
uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000cc00 |
322 |
hub 3-0:1.0: USB hub found |
323 |
hub 3-0:1.0: 2 ports detected |
324 |
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) |
325 |
-> IRQ 5 |
326 |
PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
327 |
uhci_hcd 0000:00:1d.2: UHCI Host Controller |
328 |
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 |
329 |
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000d000 |
330 |
hub 4-0:1.0: USB hub found |
331 |
hub 4-0:1.0: 2 ports detected |
332 |
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, |
333 |
low) -> IRQ 11 |
334 |
PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
335 |
uhci_hcd 0000:00:1d.3: UHCI Host Controller |
336 |
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
337 |
uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000d400 |
338 |
hub 5-0:1.0: USB hub found |
339 |
hub 5-0:1.0: 2 ports detected |
340 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver |
341 |
(PCI) |
342 |
sl811: driver sl811-hcd, 19 May 2005 |
343 |
ieee1394: Initialized config rom entry `ip1394' |
344 |
sbp2: $Rev: 1306 $ Ben Collins <bcollins@××××××.org> |
345 |
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) |
346 |
ieee1394: sbp2: Try serialize_io=0 for better performance |
347 |
libata version 1.12 loaded. |
348 |
ata_piix version 1.04 |
349 |
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 10 (level, |
350 |
low) -> IRQ 10 |
351 |
PCI: Setting latency timer of device 0000:00:1f.2 to 64 |
352 |
ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 10 |
353 |
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 10 |
354 |
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 |
355 |
88:207f |
356 |
ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 |
357 |
ata1: dev 0 configured for UDMA/133 |
358 |
scsi0 : ata_piix |
359 |
ATA: abnormal status 0x7F on port 0xE007 |
360 |
ata2: disabling port |
361 |
scsi1 : ata_piix |
362 |
Vendor: ATA Model: ST3160827AS Rev: 3.42 |
363 |
Type: Direct-Access ANSI SCSI revision: 05 |
364 |
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) |
365 |
SCSI device sda: drive cache: write back |
366 |
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) |
367 |
SCSI device sda: drive cache: write back |
368 |
sda: sda1 sda2 sda3 sda4 < sda5 sda6 > |
369 |
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 |
370 |
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@××××××.com |
371 |
ReiserFS: sda6: warning: sh-2021: reiserfs_fill_super: can not find |
372 |
reiserfs on sda6 |
373 |
kjournald starting. Commit interval 5 seconds |
374 |
EXT3 FS on sda6, internal journal |
375 |
EXT3-fs: mounted filesystem with ordered data mode. |
376 |
Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k |
377 |
EXT3 FS on sda6, internal journal |
378 |
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI |
379 |
e100: Copyright(c) 1999-2005 Intel Corporation |
380 |
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 |
381 |
ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [LNKE] -> GSI 11 (level, |
382 |
low) -> IRQ 11 |
383 |
e100: eth0: e100_probe: addr 0xff910000, irq 11, MAC addr |
384 |
00:13:20:2B:98:18 |
385 |
Real Time Clock Driver v1.12 |
386 |
Floppy drive(s): fd0 is 1.44M |
387 |
FDC 0 is a post-1991 82077 |
388 |
parport: PnPBIOS parport detected. |
389 |
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] |
390 |
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex |
391 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
392 |
NET: Registered protocol family 10 |
393 |
Disabled Privacy Extensions on device c03ae5a0(lo) |
394 |
IPv6 over IPv4 tunneling driver |
395 |
eth0: no IPv6 routers present |
396 |
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, |
397 |
low) -> IRQ 11 |
398 |
PCI: Setting latency timer of device 0000:00:1b.0 to 64 |
399 |
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... |
400 |
hda_codec: num_steps = 0 for NID=0x8 |
401 |
hda_codec: num_steps = 0 for NID=0x8 |
402 |
hda_codec: num_steps = 0 for NID=0x8 |
403 |
hda_codec: num_steps = 0 for NID=0x8 |
404 |
ACPI: PCI interrupt for device 0000:00:1b.0 disabled |
405 |
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, |
406 |
low) -> IRQ 11 |
407 |
PCI: Setting latency timer of device 0000:00:1b.0 to 64 |
408 |
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... |
409 |
hda_codec: num_steps = 0 for NID=0x8 |
410 |
hda_codec: num_steps = 0 for NID=0x8 |
411 |
hda_codec: num_steps = 0 for NID=0x8 |
412 |
hda_codec: num_steps = 0 for NID=0x8 |
413 |
hda_codec: num_steps = 0 for NID=0x8 |
414 |
hda_codec: num_steps = 0 for NID=0x8 |
415 |
ACPI: PCI interrupt for device 0000:00:1b.0 disabled |
416 |
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, |
417 |
low) -> IRQ 11 |
418 |
PCI: Setting latency timer of device 0000:00:1b.0 to 64 |
419 |
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... |
420 |
hda_codec: num_steps = 0 for NID=0x8 |
421 |
hda_codec: num_steps = 0 for NID=0x8 |
422 |
hda_codec: num_steps = 0 for NID=0x8 |
423 |
ACPI: PCI interrupt for device 0000:00:1b.0 disabled |
424 |
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, |
425 |
low) -> IRQ 11 |
426 |
PCI: Setting latency timer of device 0000:00:1b.0 to 64 |
427 |
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... |
428 |
hda_codec: num_steps = 0 for NID=0x8 |
429 |
hda_codec: num_steps = 0 for NID=0x8 |
430 |
hda_codec: num_steps = 0 for NID=0x8 |
431 |
hda_codec: num_steps = 0 for NID=0x8 |
432 |
e100: eth0: e100_watchdog: link down |
433 |
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex |
434 |
camille ~ # |
435 |
|
436 |
|
437 |
|
438 |
-- |
439 |
gentoo-user@g.o mailing list |