| 1 |
On 3/30/07, Jakob <jak.gentoo@××××××××××.com> wrote: |
| 2 |
> Hello List, |
| 3 |
> |
| 4 |
> I'm trying to set up an server with a RAID 5 but its not recognized by |
| 5 |
> the system. |
| 6 |
> Mainboard: Asus P5B Deluxe |
| 7 |
> CPU: Core2Duo 6600 2,40 GHz |
| 8 |
> Storage: 3x 320GB Hitachi SATA2 |
| 9 |
> |
| 10 |
> I've setup the RAID 5 withe the onboard Intel Matrix Storage Controller |
| 11 |
> I've tried about 5 different livecd's but none of them recognized the |
| 12 |
> RAID5, I always have /dev/sda sdb sdc with each 320GB but no RAID. |
| 13 |
> After several tryouts I managed to install gentoo to an new attached |
| 14 |
> IDE drive and built my own kernel (2.6.19-r5 gentoo sources) because I |
| 15 |
> thought maybe the kernels from the livecds are to old but I still have |
| 16 |
> the problem that the RAID isnt recognized. |
| 17 |
> for now I think the problem is the Intel Matrix Storage controller. |
| 18 |
> Did someone managed to get the RAID recognized with this controller? |
| 19 |
> Do I have to use an newer kernel version? |
| 20 |
> |
| 21 |
> thisis the output of lspci: |
| 22 |
> 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller |
| 23 |
> Hub (rev 02) |
| 24 |
> 00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02) |
| 25 |
> 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB |
| 26 |
> UHCI #4 (rev 02) |
| 27 |
> 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB |
| 28 |
> UHCI #5 (rev 02) |
| 29 |
> 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 |
| 30 |
> EHCI #2 (rev 02) |
| 31 |
> 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express |
| 32 |
> Port 1 (rev 02) |
| 33 |
> 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express |
| 34 |
> Port 5 (rev 02) |
| 35 |
> 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express |
| 36 |
> Port 6 (rev 02) |
| 37 |
> 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB |
| 38 |
> UHCI #1 (rev 02) |
| 39 |
> 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB |
| 40 |
> UHCI #2 (rev 02) |
| 41 |
> 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB |
| 42 |
> UHCI #3 (rev 02) |
| 43 |
> 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 |
| 44 |
> EHCI #1 (rev 02) |
| 45 |
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) |
| 46 |
> 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC |
| 47 |
> Interface Controller (rev 02) |
| 48 |
> 00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) SATA AHCI |
| 49 |
> Controller (rev 02) |
| 50 |
> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) |
| 51 |
> 02:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown |
| 52 |
> device 4364 (rev 12) |
| 53 |
> 03:00.0 SATA controller: JMicron Technologies, Inc. JMicron |
| 54 |
> 20360/20363 AHCI Controller (rev 02) |
| 55 |
> 03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 |
| 56 |
> AHCI Controller (rev 02) |
| 57 |
> 05:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A |
| 58 |
> IEEE-1394a-2000 Controller (PHY/Link) |
| 59 |
> 05:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 |
| 60 |
> Gigabit Ethernet Controller (rev 14) |
| 61 |
> |
| 62 |
> the livecds I've tried are: |
| 63 |
> gentoo 2006.1 livecd |
| 64 |
> gentoo-small x86 from kernel of truth |
| 65 |
> gentoo-small amd64 from kernel of truth |
| 66 |
> knoppix 5.1.1 DVD |
| 67 |
> fedora core 6 DVD |
| 68 |
> |
| 69 |
> I've also flashed the bios to the newest version. |
| 70 |
> |
| 71 |
> I hope someone could help me. |
| 72 |
> thanks in advance |
| 73 |
> |
| 74 |
> Kind regards |
| 75 |
> |
| 76 |
> Jakob |
| 77 |
> -- |
| 78 |
> gentoo-user@g.o mailing list |
| 79 |
> |
| 80 |
> |
| 81 |
|
| 82 |
http://gentoo-wiki.com/HOWTO_Install_Gentoo_with_NVRAID_using_dmraid |
| 83 |
|
| 84 |
|
| 85 |
-- |
| 86 |
-·=»Ãŧħ«=·- |
| 87 |
éí¢‹¬z¸ žÚ(¢¸&j)bž b² |
Archives