1 |
On Sat, Nov 5, 2011 at 2:30 PM, <bill.longman@×××××.com> wrote: |
2 |
|
3 |
> Is there some inittab setting that's different on your laptop? |
4 |
> |
5 |
> |
6 |
> |
7 |
> -- Sent from my HP TouchPad |
8 |
> ------------------------------ |
9 |
> On Nov 5, 2011 2:21 AM, Kfir Lavi <lavi.kfir@×××××.com> wrote: |
10 |
> Hi all, |
11 |
> I have a problem connecting my laptop to my server at home with a serial |
12 |
> cable. |
13 |
> I have cable end for /dev/ttyS0 and 2 cable ends for /dev/ttyUSB0. |
14 |
> This lets me test the connection between all serial outputs. |
15 |
> Desktop1-minicom <-> Desktop2-minicom |
16 |
> works with all connections, i.e ttyUSB0 <-> ttyUSB0, or ttyS0 <-> ttyUSB0 |
17 |
> and viseversa. |
18 |
> So when connecting 2 desktop computers everything works as expected. |
19 |
> |
20 |
> The problem: |
21 |
> When I connect my laptop to any of those desktops, I get just one way |
22 |
> connection! |
23 |
> If I swap the sides of the cable, the one way connection switch side. |
24 |
> The laptop doesn't have ttyS0, so it have to be connected via ttyUSB0 |
25 |
> When I swap sides, it is just between two usb dongles. |
26 |
> |
27 |
> The usb dongles are PL2303 both sides. |
28 |
> Settings of minicom is 38400 8n1 Hardware Flow Control=OFF |
29 |
> |
30 |
> Laptop setserial: |
31 |
> setserial -a /dev/ttyUSB0 |
32 |
> /dev/ttyUSB0, Line 0, UART: 16654, Port: 0x0000, IRQ: 0 |
33 |
> Baud_base: 460800, close_delay: 0, divisor: 0 |
34 |
> closing_wait: infinte |
35 |
> Flags: spd_normal |
36 |
> |
37 |
> Desktop1 setserial: |
38 |
> setserial -a /dev/ttyS0 |
39 |
> /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 |
40 |
> Baud_base: 115200, close_delay: 50, divisor: 0 |
41 |
> closing_wait: 3000 |
42 |
> Flags: spd_normal skip_test |
43 |
> |
44 |
> setserial -a /dev/ttyUSB0 |
45 |
> /dev/ttyUSB0, Line 0, UART: 16654, Port: 0x0000, IRQ: 0 |
46 |
> Baud_base: 460800, close_delay: 0, divisor: 0 |
47 |
> closing_wait: infinte |
48 |
> Flags: spd_normal |
49 |
> |
50 |
> I tried to add the skip_test but this seems to be not working. |
51 |
> I'm not sure what to do next. |
52 |
> |
53 |
> Any help will be appreciated, |
54 |
> Thanks, |
55 |
> Kfir |
56 |
> |
57 |
No, it is the same as in the other laptop or servers. |
58 |
|
59 |
Kfir |