| 1 |
Am Tue, 17 Apr 2018 17:20:21 +0000 |
| 2 |
schrieb Francisco Ares <frares@×××××.com>: |
| 3 |
|
| 4 |
> Can anyone tell me how to set up the scanner part of an Epson L380? |
| 5 |
|
| 6 |
It's most likely done this way (at least for printers which need the |
| 7 |
open source driver ESC/P-R): |
| 8 |
|
| 9 |
- Install sane. |
| 10 |
- In /etc/sane.d/dll.conf uncomment the line epson2. |
| 11 |
- In /etc/sane.d/epson2.conf set or uncomment those lines: |
| 12 |
|
| 13 |
usb |
| 14 |
usb <vendor ID> <product ID> |
| 15 |
net <IP address | autodiscovery> |
| 16 |
|
| 17 |
If you have it connected via Wifi you probably need to configure it for |
| 18 |
USB, too. At least you can configure it for both connection types at |
| 19 |
the same time. |
| 20 |
|
| 21 |
Just in case, you won't be able to use this printer with a Raspberry Pi, |
| 22 |
because it needs the proprietary ESC/P driver. If you consider |
| 23 |
connecting an EPSON printer to a Raspberry Pi you would need a printer |
| 24 |
which needs the open source driver ESC/P-R. |
| 25 |
|
| 26 |
Heiko |
Archives