1 |
Update on this matter. |
2 |
|
3 |
-issued the command: |
4 |
|
5 |
wpa_supplicant -iwlan0 -Dwext -d -c /etc/wpa_supplicant/wpa_supplicant.conf |
6 |
-then |
7 |
|
8 |
dhcpcd wlan0 |
9 |
Then everything is ok and my wireless works. |
10 |
|
11 |
My question is why when I issue /etc/init.d/net.wlan0 start it says about the WEP and doesn't connect? |
12 |
|
13 |
Thank you.[/code] |
14 |
|
15 |
----- Forwarded Message ---- |
16 |
From: Dani Crisan <danicrisan82@×××××.com> |
17 |
To: gentoo-user@l.g.o |
18 |
Sent: Sunday, March 16, 2008 10:41:28 AM |
19 |
Subject: [gentoo-user] wireless not working |
20 |
|
21 |
Hello, |
22 |
|
23 |
Here is the scenario: |
24 |
-wireless card: Intel PRO/WIRELESS 3945ABG |
25 |
-lsmod | grep 3945 |
26 |
iwl3945 144628 0 |
27 |
mac80211 108932 1 |
28 |
iwl3945 |
29 |
-iwlist |
30 |
wlan0 Scan completed : |
31 |
Cell 01 - Address: 00:17:9A:F4:CE:B5 |
32 |
ESSID:"a" |
33 |
Mode:Master |
34 |
Channel:6 |
35 |
Frequency:2.437 GHz (Channel 6) |
36 |
Quality=33/100 Signal level=-89 dBm Noise level=-127 dBm |
37 |
Encryption key:off |
38 |
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s |
39 |
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s |
40 |
48 Mb/s; 54 Mb/s |
41 |
Extra:tsf=00000085815e4183 |
42 |
Cell 02 - Address: 00:1D:7E:E3:8C:DD |
43 |
ESSID:"baladei-wifi" |
44 |
Mode:Master |
45 |
Channel:11 |
46 |
|
47 |
Frequency:2.462 GHz (Channel 11) |
48 |
Quality=97/100 Signal level=-28 dBm Noise level=-127 dBm |
49 |
Encryption key:on |
50 |
IE: WPA Version 1 |
51 |
Group Cipher : CCMP |
52 |
Pairwise Ciphers (1) : CCMP |
53 |
Authentication Suites (1) : PSK |
54 |
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s |
55 |
24 Mb/s; 36 |
56 |
Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s |
57 |
12 Mb/s; 48 Mb/s |
58 |
Extra:tsf=0000000b865b4049 |
59 |
|
60 |
(I WANT TO CONNECT TO CELL2-baladei-wifi) |
61 |
|
62 |
|
63 |
-cat /etc/wpa_supplicant/wpa_supplicant.conf |
64 |
|
65 |
ctrl_interface=/var/run/wpa_supplicant |
66 |
ctrl_interface_group=wheel |
67 |
update_config=0 |
68 |
fast_reauth=1 |
69 |
|
70 |
network={ |
71 |
ssid="baladei-wifi" |
72 |
proto=WPA |
73 |
key_mgmt=WPA-PSK |
74 |
pairwise=CCMP TKIP |
75 |
group=CCMP TKIP WEP |
76 |
psk="my-password" |
77 |
priority=5 |
78 |
} |
79 |
|
80 |
-cat /etc/conf.d/net |
81 |
modules_wlan0=("dhcpcd" "iwconfig") |
82 |
|
83 |
wpa_supplicant_wlan0="-Dwext -c /etc/wpa_supplicant/wpa_supplicant.conf" |
84 |
config_wlan0=("dhcp") |
85 |
dhcpcd_wlan0="-t 5 -A" |
86 |
|
87 |
pre-up(){ |
88 |
ifconfig wlan0 up |
89 |
} |
90 |
|
91 |
-and the error: |
92 |
/etc/init.d/net.wlan0 start |
93 |
* Starting |
94 |
wlan0 |
95 |
* Configuring wireless network for wlan0 |
96 |
* WEP key is not set for "baladei-wifi" - not connecting |
97 |
* WEP key is not set for "linksys" - not connecting |
98 |
* Couldn't associate with any access points on wlan0 |
99 |
* Failed to configure wireless for wlan0 [ !! ] |
100 |
|
101 |
|
102 |
|
103 |
I need to connect to my linksys WRT54GL which is set to wpa-personal / wpa algorithm: TKIP, no WEP. |
104 |
|
105 |
|
106 |
|
107 |
Please advise since I'm getting very confused. |
108 |
|
109 |
|
110 |
Thank you in advance. |
111 |
|
112 |
|
113 |
|
114 |
|
115 |
|
116 |
|
117 |
|
118 |
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. |
119 |
|
120 |
|
121 |
|
122 |
|
123 |
|
124 |
____________________________________________________________________________________ |
125 |
Looking for last minute shopping deals? |
126 |
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping |