1 |
On Friday 2 May 2008, 10:50, Vladimir Rusinov wrote: |
2 |
|
3 |
> On Fri, May 2, 2008 at 12:22 PM, Vladimir Rusinov |
4 |
> |
5 |
> <vladimir@×××××××××.info> wrote: |
6 |
> > Sorry, kernel module was not loaded and mppe was not enabled in |
7 |
> > options.pptp. Thank you. |
8 |
> |
9 |
> Another problem: the tunnel is now up, but I'm not able to ping or |
10 |
> telnet router |
11 |
|
12 |
You have several network connections. You probably need to add some |
13 |
static route(s). What's the IP address of the router? |
14 |
|
15 |
> ppp0 Link encap:Point-to-Point Protocol |
16 |
> inet addr:192.168.5.253 P-t-P:192.168.5.1 |
17 |
> Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1448 |
18 |
> Metric:1 RX packets:9 errors:0 dropped:0 overruns:0 frame:0 |
19 |
> TX packets:149 errors:0 dropped:0 overruns:0 carrier:0 |
20 |
> collisions:0 txqueuelen:3 |
21 |
> RX bytes:90 (90.0 b) TX bytes:11064 (10.8 Kb) |
22 |
> |
23 |
> # route |
24 |
> Kernel IP routing table |
25 |
> Destination Gateway Genmask Flags Metric Ref |
26 |
> Use Iface |
27 |
> 192.168.5.1 * 255.255.255.255 UH 0 0 0 |
28 |
> ppp0 |
29 |
> 172.16.85.0 * 255.255.255.0 U 0 0 0 |
30 |
> vmnet1 |
31 |
> 192.168.194.0 * 255.255.255.0 U 0 0 0 |
32 |
> vmnet8 |
33 |
> 192.168.1.0 * 255.255.255.0 U 0 0 0 |
34 |
> eth0 |
35 |
> loopback * 255.0.0.0 U 0 0 0 |
36 |
> lo |
37 |
> default 192.168.1.1 0.0.0.0 UG 0 0 0 |
38 |
> eth0 |
39 |
-- |
40 |
gentoo-user@l.g.o mailing list |