| 1 |
Sarpy Sam <sarpy.sam <at> gmail.com> writes: |
| 2 |
|
| 3 |
|
| 4 |
> Bus 002 Device 003: ID 1645:8003 Entrega [hex] |
| 5 |
|
| 6 |
> When I compile the Entrega usb driver into the kernel is shows |
| 7 |
> up in dmesg: |
| 8 |
> drivers/usb/serial/usb-serial.c: USB Serial support registered for |
| 9 |
> Xircom / Entrega PGS - (prerenumeration) |
| 10 |
|
| 11 |
> and I can go to /dev/bus/usb/002/ |
| 12 |
> and see with ls: |
| 13 |
> 001 003 |
| 14 |
|
| 15 |
> But when I go to minicom and go to set the serial port config, |
| 16 |
> I do not know how to designate the port: |
| 17 |
> With an ordinary (16550) serial port it would be something like: |
| 18 |
> /dev/ttyS1 or /dev/ttyS0 |
| 19 |
|
| 20 |
|
| 21 |
> My usb to serial cable gets recognized as /dev/ttyUSB1 |
| 22 |
|
| 23 |
Nope that's not it. Nothing appears in dmesg. |
| 24 |
I looked at /dev/* and found nothing....... |
| 25 |
|
| 26 |
I'm stumped and also found nothing useful googling around. |
| 27 |
|
| 28 |
|
| 29 |
James |
| 30 |
|
| 31 |
|
| 32 |
|
| 33 |
|
| 34 |
|
| 35 |
|
| 36 |
-- |
| 37 |
gentoo-user@g.o mailing list |
Archives