1 |
On Wednesday, 20 December 2017 18:31:03 GMT Mike Gilbert wrote: |
2 |
> On Wed, Dec 20, 2017 at 12:39 PM, Mick <michaelkintzios@×××××.com> wrote: |
3 |
> > [ 1.072525] [drm] Loading RV730 Microcode |
4 |
> > [ 1.072679] radeon 0000:02:00.0: Direct firmware load for radeon/ |
5 |
> > RV730_pfp.bin failed with error -2 |
6 |
> > [ 1.072859] r600_cp: Failed to load firmware "radeon/RV730_pfp.bin" |
7 |
> > [ 1.072974] [drm:rv770_init] *ERROR* Failed to load firmware! |
8 |
> |
9 |
> Does this error occur before your root filesystem has been mounted? |
10 |
> You should see a message about mounting root further down in the dmesg |
11 |
> output. |
12 |
> |
13 |
> If that's the case, and your kernel needs the firmware blob before |
14 |
> root has been mounted, you will probably need to start using an |
15 |
> initramfs, or add radeon/RV730_pfp.bin to CONFIG_EXTRA_FIRMWARE. |
16 |
|
17 |
I beg your pardon guys, the deprecated 'make firmware_install' through me off |
18 |
the scent! It seems that the blobs for Radeon R730 have changed with kernel |
19 |
4.14.7, from those the Gentoo Wiki shows. So I'm fishing for errors in dmesg |
20 |
and adding one blob at a time to see what I get. The kernel compile builds |
21 |
the blobs fine as I show below, even if the firmware_install is not used any |
22 |
longer. |
23 |
|
24 |
CHK include/generated/compile.h |
25 |
MK_FW firmware/radeon/RV730_me.bin.gen.S |
26 |
AS firmware/radeon/RV730_me.bin.gen.o |
27 |
AR firmware/built-in.o |
28 |
|
29 |
-- |
30 |
Regards, |
31 |
Mick |