| 1 |
Evening all, |
| 2 |
|
| 3 |
I've plugged in a new USB Bluetooth adapter, following the instructions in the |
| 4 |
wiki: https://wiki.gentoo.org/wiki/Bluetooth . The idea is to connect to my |
| 5 |
Android phone, but I'm only getting part way. |
| 6 |
|
| 7 |
After installing bluez and broadcom-bt-firmware, then booting with the new |
| 8 |
kernel, Bluetooth discovery and pairing work fine, but KDE Connect on each |
| 9 |
device can't see the other: they both report "No Devices". |
| 10 |
|
| 11 |
That nice Mr Google doesn't help, nor do the fine manuals and KDE web pages. |
| 12 |
Has anyone succeeded with this? |
| 13 |
|
| 14 |
$ hciconfig -a |
| 15 |
hci0: Type: Primary Bus: USB |
| 16 |
BD Address: 5C:F3:70:9C:BB:9F ACL MTU: 1021:8 SCO MTU: 64:1 |
| 17 |
UP RUNNING PSCAN ISCAN INQUIRY |
| 18 |
RX bytes:5628 acl:45 sco:0 events:557 errors:0 |
| 19 |
TX bytes:41821 acl:47 sco:0 commands:487 errors:0 |
| 20 |
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 |
| 21 |
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 |
| 22 |
Link policy: RSWITCH SNIFF |
| 23 |
Link mode: SLAVE ACCEPT |
| 24 |
Name: 'BlueZ 5.55' |
| 25 |
Class: 0x1c0104 |
| 26 |
Service Classes: Rendering, Capturing, Object Transfer |
| 27 |
Device Class: Computer, Desktop workstation |
| 28 |
HCI Version: 4.1 (0x7) Revision: 0x16e4 |
| 29 |
LMP Version: 4.1 (0x7) Subversion: 0x220e |
| 30 |
Manufacturer: Broadcom Corporation (15) |
| 31 |
|
| 32 |
-- |
| 33 |
Regards, |
| 34 |
Peter. |
Archives