| 1 |
Hi, |
| 2 |
|
| 3 |
For the first time in my life, I think I have a drive failing on me. |
| 4 |
Here is the info: |
| 5 |
|
| 6 |
root@smoker / # smartctl -a /dev/sdc |
| 7 |
smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build) |
| 8 |
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
| 9 |
|
| 10 |
=== START OF INFORMATION SECTION === |
| 11 |
Model Family: Western Digital Caviar family |
| 12 |
Device Model: WDC WD800BB-00DKA0 |
| 13 |
Serial Number: WD-WCAHL2497094 |
| 14 |
Firmware Version: 77.07W77 |
| 15 |
User Capacity: 80,026,361,856 bytes |
| 16 |
Device is: In smartctl database [for details use: -P show] |
| 17 |
ATA Version is: 6 |
| 18 |
ATA Standard is: Exact ATA specification draft version not indicated |
| 19 |
Local Time is: Tue Nov 1 13:52:49 2011 CDT |
| 20 |
SMART support is: Available - device has SMART capability. |
| 21 |
SMART support is: Enabled |
| 22 |
|
| 23 |
=== START OF READ SMART DATA SECTION === |
| 24 |
SMART overall-health self-assessment test result: FAILED! |
| 25 |
Drive failure expected in less than 24 hours. SAVE ALL DATA. |
| 26 |
See vendor-specific Attribute list for failed Attributes. |
| 27 |
|
| 28 |
General SMART Values: |
| 29 |
Offline data collection status: (0x85) Offline data collection activity |
| 30 |
was aborted by an interrupting |
| 31 |
command from host. |
| 32 |
Auto Offline Data Collection: |
| 33 |
Enabled. |
| 34 |
Self-test execution status: ( 73) The previous self-test completed |
| 35 |
having |
| 36 |
a test element that failed and |
| 37 |
the test |
| 38 |
element that failed is not known. |
| 39 |
Total time to complete Offline |
| 40 |
data collection: (2478) seconds. |
| 41 |
Offline data collection |
| 42 |
capabilities: (0x7b) SMART execute Offline immediate. |
| 43 |
Auto Offline data collection |
| 44 |
on/off support. |
| 45 |
Suspend Offline collection upon new |
| 46 |
command. |
| 47 |
Offline surface scan supported. |
| 48 |
Self-test supported. |
| 49 |
Conveyance Self-test supported. |
| 50 |
Selective Self-test supported. |
| 51 |
SMART capabilities: (0x0003) Saves SMART data before entering |
| 52 |
power-saving mode. |
| 53 |
Supports SMART auto save timer. |
| 54 |
Error logging capability: (0x01) Error logging supported. |
| 55 |
No General Purpose Logging support. |
| 56 |
Short self-test routine |
| 57 |
recommended polling time: ( 2) minutes. |
| 58 |
Extended self-test routine |
| 59 |
recommended polling time: ( 38) minutes. |
| 60 |
Conveyance self-test routine |
| 61 |
recommended polling time: ( 5) minutes. |
| 62 |
|
| 63 |
SMART Attributes Data Structure revision number: 16 |
| 64 |
Vendor Specific SMART Attributes with Thresholds: |
| 65 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE |
| 66 |
UPDATED WHEN_FAILED RAW_VALUE |
| 67 |
1 Raw_Read_Error_Rate 0x000b 018 001 051 Pre-fail |
| 68 |
Always FAILING_NOW 1904 |
| 69 |
3 Spin_Up_Time 0x0007 087 084 021 Pre-fail |
| 70 |
Always - 2166 |
| 71 |
4 Start_Stop_Count 0x0032 099 099 040 Old_age |
| 72 |
Always - 1288 |
| 73 |
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail |
| 74 |
Always - 1 |
| 75 |
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail |
| 76 |
Always - 0 |
| 77 |
9 Power_On_Hours 0x0032 023 023 000 Old_age |
| 78 |
Always - 56466 |
| 79 |
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail |
| 80 |
Always - 0 |
| 81 |
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail |
| 82 |
Always - 0 |
| 83 |
12 Power_Cycle_Count 0x0032 099 099 000 Old_age |
| 84 |
Always - 1039 |
| 85 |
194 Temperature_Celsius 0x0022 110 253 000 Old_age |
| 86 |
Always - 33 |
| 87 |
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age |
| 88 |
Always - 1 |
| 89 |
197 Current_Pending_Sector 0x0012 199 199 000 Old_age |
| 90 |
Always - 17 |
| 91 |
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age |
| 92 |
Always - 10 |
| 93 |
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age |
| 94 |
Always - 1155 |
| 95 |
200 Multi_Zone_Error_Rate 0x0009 195 085 051 Pre-fail |
| 96 |
Offline - 191 |
| 97 |
|
| 98 |
SMART Error Log Version: 1 |
| 99 |
ATA Error Count: 4449 (device log contains only the most recent five errors) |
| 100 |
CR = Command Register [HEX] |
| 101 |
FR = Features Register [HEX] |
| 102 |
SC = Sector Count Register [HEX] |
| 103 |
SN = Sector Number Register [HEX] |
| 104 |
CL = Cylinder Low Register [HEX] |
| 105 |
CH = Cylinder High Register [HEX] |
| 106 |
DH = Device/Head Register [HEX] |
| 107 |
DC = Device Command Register [HEX] |
| 108 |
ER = Error register [HEX] |
| 109 |
ST = Status register [HEX] |
| 110 |
Powered_Up_Time is measured from power on, and printed as |
| 111 |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
| 112 |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
| 113 |
|
| 114 |
Error 4449 occurred at disk power-on lifetime: 759 hours (31 days + 15 |
| 115 |
hours) |
| 116 |
When the command that caused the error occurred, the device was doing |
| 117 |
SMART Offline or Self-test. |
| 118 |
|
| 119 |
After command completion occurred, registers were: |
| 120 |
ER ST SC SN CL CH DH |
| 121 |
-- -- -- -- -- -- -- |
| 122 |
40 51 08 a7 73 a8 f4 |
| 123 |
|
| 124 |
Commands leading to the command that caused the error were: |
| 125 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 126 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
| 127 |
01 00 c8 00 00 08 00 00 01:47:13.550 [RESERVED] |
| 128 |
00 00 00 00 00 00 00 00 01:47:13.550 NOP [Abort queued commands] |
| 129 |
01 00 ef 00 00 45 00 00 01:47:13.550 [RESERVED] |
| 130 |
00 00 00 00 00 00 00 00 01:47:13.550 NOP [Abort queued commands] |
| 131 |
01 00 c8 00 00 08 00 00 01:47:13.550 [RESERVED] |
| 132 |
|
| 133 |
Error 4448 occurred at disk power-on lifetime: 759 hours (31 days + 15 |
| 134 |
hours) |
| 135 |
When the command that caused the error occurred, the device was doing |
| 136 |
SMART Offline or Self-test. |
| 137 |
|
| 138 |
After command completion occurred, registers were: |
| 139 |
ER ST SC SN CL CH DH |
| 140 |
-- -- -- -- -- -- -- |
| 141 |
40 51 08 a7 73 a8 f4 |
| 142 |
|
| 143 |
Commands leading to the command that caused the error were: |
| 144 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 145 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
| 146 |
01 00 c8 00 00 08 00 00 01:47:11.550 [RESERVED] |
| 147 |
00 00 00 00 00 00 00 00 01:47:11.550 NOP [Abort queued commands] |
| 148 |
01 00 ef 00 00 45 00 00 01:47:11.550 [RESERVED] |
| 149 |
01 00 27 00 00 00 00 00 01:47:11.550 [RESERVED] |
| 150 |
04 00 a8 00 00 a7 73 00 01:47:11.550 [RESERVED] |
| 151 |
|
| 152 |
Error 4447 occurred at disk power-on lifetime: 759 hours (31 days + 15 |
| 153 |
hours) |
| 154 |
When the command that caused the error occurred, the device was doing |
| 155 |
SMART Offline or Self-test. |
| 156 |
|
| 157 |
After command completion occurred, registers were: |
| 158 |
ER ST SC SN CL CH DH |
| 159 |
-- -- -- -- -- -- -- |
| 160 |
40 51 08 a7 73 a8 f4 |
| 161 |
|
| 162 |
Commands leading to the command that caused the error were: |
| 163 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 164 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
| 165 |
01 00 c8 00 00 08 00 00 01:47:09.500 [RESERVED] |
| 166 |
00 00 00 00 00 00 00 00 01:47:09.500 NOP [Abort queued commands] |
| 167 |
01 00 ef 00 00 45 00 00 01:47:09.500 [RESERVED] |
| 168 |
00 00 00 00 00 00 00 00 01:47:09.500 NOP [Abort queued commands] |
| 169 |
01 00 c8 00 00 08 00 00 01:47:09.500 [RESERVED] |
| 170 |
|
| 171 |
Error 4446 occurred at disk power-on lifetime: 759 hours (31 days + 15 |
| 172 |
hours) |
| 173 |
When the command that caused the error occurred, the device was doing |
| 174 |
SMART Offline or Self-test. |
| 175 |
|
| 176 |
After command completion occurred, registers were: |
| 177 |
ER ST SC SN CL CH DH |
| 178 |
-- -- -- -- -- -- -- |
| 179 |
40 51 08 a7 73 a8 f4 |
| 180 |
|
| 181 |
Commands leading to the command that caused the error were: |
| 182 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 183 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
| 184 |
01 00 c8 00 00 08 00 00 01:47:07.550 [RESERVED] |
| 185 |
01 00 ec 00 00 00 00 00 01:47:07.550 [RESERVED] |
| 186 |
00 00 00 00 00 00 00 00 01:47:07.550 NOP [Abort queued commands] |
| 187 |
01 00 ec 00 00 00 00 00 01:47:07.550 [RESERVED] |
| 188 |
00 00 00 00 00 00 00 00 01:47:07.550 NOP [Abort queued commands] |
| 189 |
|
| 190 |
Error 4445 occurred at disk power-on lifetime: 759 hours (31 days + 15 |
| 191 |
hours) |
| 192 |
When the command that caused the error occurred, the device was doing |
| 193 |
SMART Offline or Self-test. |
| 194 |
|
| 195 |
After command completion occurred, registers were: |
| 196 |
ER ST SC SN CL CH DH |
| 197 |
-- -- -- -- -- -- -- |
| 198 |
40 51 08 a7 73 a8 f4 |
| 199 |
|
| 200 |
Commands leading to the command that caused the error were: |
| 201 |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name |
| 202 |
-- -- -- -- -- -- -- -- ---------------- -------------------- |
| 203 |
01 00 c8 00 00 08 00 00 01:47:05.600 [RESERVED] |
| 204 |
00 00 00 00 00 00 00 00 01:47:05.600 NOP [Abort queued commands] |
| 205 |
01 00 ef 00 00 45 00 00 01:47:05.600 [RESERVED] |
| 206 |
00 00 00 00 00 00 00 00 01:47:05.600 NOP [Abort queued commands] |
| 207 |
01 00 c8 00 00 08 00 00 01:47:05.600 [RESERVED] |
| 208 |
|
| 209 |
SMART Self-test log structure revision number 1 |
| 210 |
Num Test_Description Status Remaining |
| 211 |
LifeTime(hours) LBA_of_first_error |
| 212 |
# 1 Extended offline Completed: unknown failure 90% |
| 213 |
760 4294705476 |
| 214 |
# 2 Extended offline Completed: unknown failure 90% |
| 215 |
759 4294705476 |
| 216 |
# 3 Extended offline Completed: unknown failure 90% |
| 217 |
759 4294705476 |
| 218 |
# 4 Extended offline Completed without error 00% |
| 219 |
1038 - |
| 220 |
# 5 Short offline Completed without error 00% |
| 221 |
1037 - |
| 222 |
# 6 Extended offline Completed without error 00% |
| 223 |
1075 - |
| 224 |
# 7 Extended offline Completed without error 00% |
| 225 |
305 - |
| 226 |
# 8 Extended offline Completed without error 00% |
| 227 |
660 - |
| 228 |
# 9 Extended offline Completed without error 00% |
| 229 |
213 - |
| 230 |
#10 Extended offline Completed without error 00% |
| 231 |
687 - |
| 232 |
#11 Extended offline Completed without error 00% |
| 233 |
686 - |
| 234 |
#12 Extended offline Completed without error 00% |
| 235 |
629 - |
| 236 |
|
| 237 |
SMART Selective self-test log data structure revision number 1 |
| 238 |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| 239 |
1 0 0 Not_testing |
| 240 |
2 0 0 Not_testing |
| 241 |
3 0 0 Not_testing |
| 242 |
4 0 0 Not_testing |
| 243 |
5 0 0 Not_testing |
| 244 |
Selective self-test flags (0x0): |
| 245 |
After scanning selected spans, do NOT read-scan remainder of disk. |
| 246 |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
| 247 |
|
| 248 |
root@smoker / # |
| 249 |
|
| 250 |
What you folks think? Can I fix it somehow? I got a good shovel handy |
| 251 |
just in case. |
| 252 |
|
| 253 |
Dale |
| 254 |
|
| 255 |
:-) :-) |
Archives