| 1 |
> http://en.gentoo-wiki.com/wiki/Intel_GMA |
| 2 |
> |
| 3 |
> which is pertinent to my hardware and kernel/drivers. Therefore if I do |
| 4 |
> |
| 5 |
> |
| 6 |
> -> vblank_mode=0 glxgears |
| 7 |
> ATTENTION: default value of option vblank_mode overridden by environment. |
| 8 |
> get fences failed: -1 |
| 9 |
> param: 6, val: 0 |
| 10 |
> 4418 frames in 5.0 seconds = 883.510 FPS |
| 11 |
> 4490 frames in 5.0 seconds = 897.871 FPS |
| 12 |
> 4491 frames in 5.0 seconds = 898.054 FPS |
| 13 |
> 4481 frames in 5.0 seconds = 896.043 FPS |
| 14 |
> 4382 frames in 5.0 seconds = 876.251 FPS |
| 15 |
> |
| 16 |
> I get much better performance as I used to have before the xorg upgrade. |
| 17 |
> This is where I am now trying to gather information on how to deal with |
| 18 |
> dri and vblank_mode settings. |
| 19 |
> |
| 20 |
> Hope this helps. |
| 21 |
> |
| 22 |
> -- |
| 23 |
> Valmor |
| 24 |
> |
| 25 |
> |
| 26 |
|
| 27 |
Using the link you posted I was able to get similar numbers on my |
| 28 |
card, if you scroll down to the bottom of the page there where it |
| 29 |
talks about driconf, and set up your drirc file you should be able to |
| 30 |
apply these settings system wide. I am still have some issues with |
| 31 |
compiz-fusion running smoothly I currently dont have the cube working |
| 32 |
it lags very bad with that. I will do some more research into the |
| 33 |
kernel bug and see if upgrading and re-enabling tiling fixes this |
| 34 |
issue. Thanks for the link and pointing me in the right direction. |
| 35 |
|
| 36 |
AJ |
Archives