1 |
On Sat, Mar 28, 2009 at 9:11 AM, Harry Putnam <reader@×××××××.com> wrote: |
2 |
> Harry Putnam <reader@×××××××.com> writes: |
3 |
> |
4 |
>>> Most drives have a jumper to put them into 1.5gbps mode (rather than |
5 |
>>> 3gbps mode). See if your new drives have one of those jumpers. |
6 |
>> |
7 |
>> There are pins (no actual jumper was supplied) but the only thing mentioned |
8 |
>> on the drive about using pins is this: |
9 |
>> |
10 |
>> Jumpered pins 3 and 4 enables PUIS (Power Up In Standby) |
11 |
>> |
12 |
>> I think I found what you are referring to but there is no mention of |
13 |
>> changing 3gb to 1.5gb... at least not in those terms. Or maybe this |
14 |
>> is something else. |
15 |
>> |
16 |
>> They call it: |
17 |
>> |
18 |
>> Enable or disable the spread spectrum clocking feature. |
19 |
>> Default setting is disable |
20 |
>> |
21 |
>> Here: |
22 |
>> http://www.wdc.com/en/products/products.asp?driveid=487&language=en |
23 |
>> |
24 |
>> Which has this further link on the Specification tab/Left hand column |
25 |
>> Quick Installation Guide |
26 |
>> |
27 |
>> http://www.wdc.com/en/library/sata/2079-001042.pdf |
28 |
> |
29 |
> I found a little more about this. Something suggesting to use pins |
30 |
> 5-6. (Figure 4 in the pdf at below URL) |
31 |
> |
32 |
> http://www.google.com/search?hl=en&rlz=1G1GGLQ_ENUS273&q=WD+Sata+II+jumpers&btnG=Search |
33 |
> |
34 |
> The top one on the list. (it has such a massive direct url I've given |
35 |
> the search page containing the hit (at the top)) |
36 |
> |
37 |
> So installed jumper on 5-6 and booted up. I still get the same kind of |
38 |
> hang at the point where the adaptec PCI card throws up a screen. |
39 |
> |
40 |
> Press F3 to enter configuration utility |
41 |
> Primary channel: WDC WD200-blah 19082 MB <= old 200gb drive |
42 |
> Secondary channerl: WDC WD750-blah |
43 |
> |
44 |
> No size given on the new drive, like it cannot read the drive size. |
45 |
> And no further progress seems possible. Pressing F3 has no effect. |
46 |
|
47 |
I found the following page which would agree with pins 5-6 meaning |
48 |
what I was suggesting: |
49 |
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=2534 |
50 |
|
51 |
I also found this page which mentions your Adaptec card does not work |
52 |
with 750GB Seagate drives -- so maybe that card is the source of your |
53 |
problems. http://www.sun.com/bigadmin/hcl/data/components/details/801.html |
54 |
|
55 |
Are you using the latest BIOS for the Adaptec card? It looks like the |
56 |
chipset is Silicon Image 3112A and the latest BIOS on SI's website is |
57 |
4.2.84. http://www.siliconimage.com/support/ |