1 |
Mick <michaelkintzios@×××××.com> [14-07-26 11:28]: |
2 |
> On Saturday 26 Jul 2014 02:49:15 meino.cramer@×××.de wrote: |
3 |
> > Hi, |
4 |
> > |
5 |
> > After running smartctl for an extended offline test I got |
6 |
> > a badblock (information extracted from the report): |
7 |
> > |
8 |
> > SMART Self-test log structure revision number 1 |
9 |
> > Num Test_Description Status Remaining LifeTime(hours) |
10 |
> > LBA_of_first_error # 1 Extended offline Completed: read failure |
11 |
> > 90% 14460 4288352511 197 Current_Pending_Sector 0x0032 200 |
12 |
> > 200 000 Old_age Always - 1 |
13 |
> > |
14 |
> > I found a explanation to map the LBA to a partition here: |
15 |
> > http://smartmontools.sourceforge.net/badblockhowto.html |
16 |
> > |
17 |
> > My partition layout is: |
18 |
> > #> sudo fdisk -lu /dev/sda |
19 |
> > |
20 |
> > Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors |
21 |
> > Units: sectors of 1 * 512 = 512 bytes |
22 |
> > Sector size (logical/physical): 512 bytes / 512 bytes |
23 |
> > I/O size (minimum/optimal): 512 bytes / 512 bytes |
24 |
> > Disklabel type: dos |
25 |
> > Disk identifier: 0x07ec16a2 |
26 |
> > |
27 |
> > Device Boot Start End Blocks Id System |
28 |
> > /dev/sda1 * 2048 104447 51200 83 Linux |
29 |
> > /dev/sda2 104448 12687359 6291456 82 Linux swap / Solaris |
30 |
> > /dev/sda3 12687360 222402559 104857600 83 Linux |
31 |
> > /dev/sda4 222402560 1953525167 865561304 5 Extended |
32 |
> > /dev/sda5 222404608 232890367 5242880 83 Linux |
33 |
> > /dev/sda6 232892416 442607615 104857600 83 Linux |
34 |
> > /dev/sda7 442609664 652324863 104857600 83 Linux |
35 |
> > /dev/sda8 652326912 862042111 104857600 83 Linux |
36 |
> > /dev/sda9 862044160 1071759359 104857600 83 Linux |
37 |
> > /dev/sda10 1071761408 1281476607 104857600 83 Linux |
38 |
> > /dev/sda11 1281478656 1491193855 104857600 83 Linux |
39 |
> > /dev/sda12 1491195904 1953525167 231164632 83 Linux |
40 |
> > 4288352511 <<< The number reported by smartctl |
41 |
> > |
42 |
> > |
43 |
> > Following the linked document... |
44 |
> > It seems the bad LBA is not on the checked harddisk. |
45 |
> > |
46 |
> > Or (more obvious) I did something wrong... |
47 |
> |
48 |
> You are probably comparing different units. The Start and End of fdisk are |
49 |
> reporting sectors, each sector being 512 bytes. Therefore if the LBA is |
50 |
> reported by smartctl in bytes, you have: |
51 |
> |
52 |
> 4,288,352,511 ÷ 512 = 8,375,688.5 |
53 |
> |
54 |
> which would place it within your swap partition. |
55 |
> |
56 |
> I would do this: |
57 |
> |
58 |
> swapoff /dev/sda2 |
59 |
> |
60 |
> dd if=/dev/zero of=/dev/sda2 bs=512 conv=notrunc |
61 |
> |
62 |
> mkswap -L swap -c /dev/sda2 |
63 |
> |
64 |
> swapon /dev/sda2 |
65 |
> |
66 |
> and hopefully the problem will be gone when you run the next smartctl test. |
67 |
> |
68 |
> -- |
69 |
> Regards, |
70 |
> Mick |
71 |
|
72 |
|
73 |
Sorry for stuutering postings...overlocked this one: |
74 |
#>dd if=/dev/zero of=/dev/sda2 bs=512 conv=notrunc |
75 |
dd: error writing ‘/dev/sda2’: Input/output error |
76 |
|
77 |
Hrrrmpfff... |
78 |
|
79 |
Why does it nt remap those ones? |
80 |
|
81 |
Best regards, |
82 |
mcc |