1 |
On Saturday 02 December 2006 15:51, Mick wrote: |
2 |
> Hi All, |
3 |
> |
4 |
> I've just made a rather expensive double layer coffee coaster trying |
5 |
> to copy a DVD with K3b. This was the error: |
6 |
> |
7 |
> ================================== |
8 |
> System |
9 |
> ----------------------- |
10 |
> K3b Version: 0.12.14 |
11 |
> |
12 |
> KDE Version: 3.5.5 |
13 |
> QT Version: 3.3.6 |
14 |
> Kernel: 2.6.18-gentoo-r3 |
15 |
> Devices |
16 |
> ----------------------- |
17 |
> IDE-DVD ROM 16x HD14 (/dev/hdb, ) at [CD-ROM; DVD-ROM; DVD+R; DVD+R |
18 |
> DL] [DVD-ROM; DVD+R Double Layer; CD-ROM] [None] |
19 |
> |
20 |
> PHILIPS DVD8421 9H10 (/dev/hda, ) at /mnt/cdrom1 [CD-R; CD-RW; CD-ROM; |
21 |
> DVD-ROM; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD+RW; DVD+R; DVD+R |
22 |
> Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R16; |
23 |
> RAW/R96R] |
24 |
> Used versions |
25 |
> ----------------------- |
26 |
> growisofs: 6.1 |
27 |
> |
28 |
> growisofs |
29 |
> ----------------------- |
30 |
> Executing 'builtin_dd if=/tmp/kde-michael/k3b_image.iso of=/dev/hda |
31 |
> obs=32k seek=0' |
32 |
> /dev/hda: splitting layers at 1844512 blocks |
33 |
> /dev/hda: "Current Write Speed" is 2.5x1385KBps. |
34 |
> 0/7187566592 ( 0.0%) @0x, remaining ??:?? RBU 100.0% |
35 |
> 3014656/7187566592 ( 0.0%) @0.6x, remaining 357:28 RBU 100.0% |
36 |
> 11403264/7187566592 ( 0.2%) @1.8x, remaining 125:51 RBU 100.0% |
37 |
> 20807680/7187566592 ( 0.3%) @2.0x, remaining 91:50 RBU 100.0% |
38 |
> [snip...] |
39 |
> 4412506112/7187566592 (61.4%) @0.6x, remaining 15:08 RBU 100.0% |
40 |
> 4412506112/7187566592 (61.4%) @0.0x, remaining 15:11 RBU 100.0% |
41 |
> |
42 |
> :-[ WRITE@LBA=20e030h failed with SK=3h/ASC=0Ch/ACQ=00h]: Input/output |
43 |
> : error -( write failed: Input/output error |
44 |
> |
45 |
> growisofs command: |
46 |
> ----------------------- |
47 |
> /usr/bin/growisofs -Z /dev/hda=/tmp/kde-michael/k3b_image.iso |
48 |
> -use-the-force-luke=notray -use-the-force-luke=tty |
49 |
> -use-the-force-luke=break:1844512 -dvd-compat -speed=2.4 |
50 |
> -use-the-force-luke=bufsize:32m |
51 |
> ================================== |
52 |
> |
53 |
> It seems to me that k3b didn't write in double layer and when the |
54 |
> first layer was burned it conked out. Could it be something else? |
55 |
> Some setting? Is there any hope left - I need to copy this movie! |
56 |
> </sob> |
57 |
|
58 |
2nd coaster, this time first I saved it on the hard disk as a separate |
59 |
activity as an iso image and then when I tried to burn, it aborted at |
60 |
3606380544/718756692 (50.2%). Any ideas what's at fault here? I am using |
61 |
DVD+R DL 8.5G by Imation, which I believe are not bad quality blanks (but not |
62 |
sure). I have reached a stage where buying another DVD is cheaper than |
63 |
continuing the effort to copy it. :-( |
64 |
-- |
65 |
Regards, |
66 |
Mick |