1 |
> |
2 |
> |
3 |
>Try rmmod ehci-hcd, then modprobe ohci-hcd and see what happens. |
4 |
> |
5 |
>Also, include from /var/log/messages everything printed from when ohci-hcd is |
6 |
>modprobed to then end of actually plugging in the Sansa. And again when |
7 |
>trying ehci-hcd. |
8 |
> |
9 |
>-- |
10 |
ohci was not included in my kernel. |
11 |
I recompiled with ehci and uhci as modules, then ran rmmod ehci-hcd |
12 |
Since my wireless ethernet adapter is also a usb module, the output is a little verbose, so my apologies in advance for the length of the dmesg output below. |
13 |
|
14 |
That did seem to get the card working, so I then recompiled a kernel with uhci support only, and I was then able to attach the device. This seems to be a little extreme, however, as I know this device maps correctly on my desktop in ehci mode. Can you discern anything from the dmesg output which might shed some light on the real root cause? |
15 |
|
16 |
Thanks |
17 |
|
18 |
Jeff |
19 |
|
20 |
ehci_hcd 0000:00:1d.7: remove, state 1 |
21 |
usb usb7: USB disconnect, address 1 |
22 |
ehci_hcd 0000:00:1d.7: USB bus 7 deregistered |
23 |
ACPI: PCI interrupt for device 0000:00:1d.7 disabled |
24 |
ehci_hcd 0000:00:1a.7: remove, state 1 |
25 |
usb usb6: USB disconnect, address 1 |
26 |
usb 6-2: USB disconnect, address 2 |
27 |
RX Status Error! |
28 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
29 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
30 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
31 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
32 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
33 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
34 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
35 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
36 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
37 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
38 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
39 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
40 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
41 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
42 |
RX process aborted due to explicit shutdown (ffffff94) RX Status Error! |
43 |
RX process aborted due to explicit shutdown (ffffff94) <4>rtl8180_close process |
44 |
rtl8180_down process |
45 |
read_nic_byte TimeOut! status:ffffffed |
46 |
write_nic_byte TimeOut! status:ffffffed |
47 |
write_nic_word TimeOut! status:ffffffed |
48 |
read_nic_byte TimeOut! status:ffffffed |
49 |
write_nic_dword TimeOut! status:ffffffed |
50 |
write_nic_word TimeOut! status:ffffffed |
51 |
read_nic_byte TimeOut! status:ffffffed |
52 |
write_nic_byte TimeOut! status:ffffffed |
53 |
write_nic_word TimeOut! status:ffffffed |
54 |
write_nic_word TimeOut! status:ffffffed |
55 |
write_nic_word TimeOut! status:ffffffed |
56 |
write_nic_word TimeOut! status:ffffffed |
57 |
read_nic_dword TimeOut! status:ffffffed |
58 |
write_nic_dword TimeOut! status:ffffffed |
59 |
write_nic_byte TimeOut! status:ffffffed |
60 |
write_nic_byte TimeOut! status:ffffffed |
61 |
write_nic_byte TimeOut! status:ffffffed |
62 |
write_nic_byte TimeOut! status:ffffffed |
63 |
write_nic_byte TimeOut! status:ffffffed |
64 |
write_nic_byte TimeOut! status:ffffffed |
65 |
write_nic_byte TimeOut! status:ffffffed |
66 |
write_nic_byte TimeOut! status:ffffffed |
67 |
write_nic_byte TimeOut! status:ffffffed |
68 |
write_nic_byte TimeOut! status:ffffffed |
69 |
write_nic_byte TimeOut! status:ffffffed |
70 |
write_nic_byte TimeOut! status:ffffffed |
71 |
write_nic_byte TimeOut! status:ffffffed |
72 |
write_nic_byte TimeOut! status:ffffffed |
73 |
write_nic_byte TimeOut! status:ffffffed |
74 |
write_nic_byte TimeOut! status:ffffffed |
75 |
write_nic_byte TimeOut! status:ffffffed |
76 |
write_nic_byte TimeOut! status:ffffffed |
77 |
write_nic_byte TimeOut! status:ffffffed |
78 |
write_nic_byte TimeOut! status:ffffffed |
79 |
write_nic_byte TimeOut! status:ffffffed |
80 |
write_nic_byte TimeOut! status:ffffffed |
81 |
write_nic_byte TimeOut! status:ffffffed |
82 |
write_nic_byte TimeOut! status:ffffffed |
83 |
write_nic_byte TimeOut! status:ffffffed |
84 |
write_nic_byte TimeOut! status:ffffffed |
85 |
write_nic_byte TimeOut! status:ffffffed |
86 |
write_nic_byte TimeOut! status:ffffffed |
87 |
write_nic_byte TimeOut! status:ffffffed |
88 |
write_nic_byte TimeOut! status:ffffffed |
89 |
write_nic_byte TimeOut! status:ffffffed |
90 |
write_nic_byte TimeOut! status:ffffffed |
91 |
write_nic_byte TimeOut! status:ffffffed |
92 |
read_nic_byte TimeOut! status:ffffffed |
93 |
write_nic_byte TimeOut! status:ffffffed |
94 |
read_nic_byte TimeOut! status:ffffffed |
95 |
write_nic_byte TimeOut! status:ffffffed |
96 |
write_nic_dword TimeOut! status:ffffffed |
97 |
read_nic_byte TimeOut! status:ffffffed |
98 |
write_nic_byte TimeOut! status:ffffffed |
99 |
read_nic_byte TimeOut! status:ffffffed |
100 |
write_nic_byte TimeOut! status:ffffffed |
101 |
write_nic_byte TimeOut! status:ffffffed |
102 |
read_nic_word TimeOut! status:ffffffed |
103 |
read_nic_word TimeOut! status:ffffffed |
104 |
read_nic_word TimeOut! status:ffffffed |
105 |
write_nic_word TimeOut! status:ffffffed |
106 |
write_nic_word TimeOut! status:ffffffed |
107 |
write_nic_word TimeOut! status:ffffffed |
108 |
write_nic_word TimeOut! status:ffffffed |
109 |
write_nic_word TimeOut! status:ffffffed |
110 |
write_nic_word TimeOut! status:ffffffed |
111 |
write_nic_word TimeOut! status:ffffffed |
112 |
write_nic_dword TimeOut! status:ffffffed |
113 |
read_nic_dword TimeOut! status:ffffffed |
114 |
write_nic_dword TimeOut! status:ffffffed |
115 |
usb 3-1: new full speed USB device using uhci_hcd and address 2 |
116 |
read_nic_word TimeOut! status:ffffffed |
117 |
read_nic_word TimeOut! status:ffffffed |
118 |
read_nic_word TimeOut! status:ffffffed |
119 |
write_nic_word TimeOut! status:ffffffed |
120 |
write_nic_word TimeOut! status:ffffffed |
121 |
write_nic_word TimeOut! status:ffffffed |
122 |
write_nic_word TimeOut! status:ffffffed |
123 |
write_nic_word TimeOut! status:ffffffed |
124 |
write_nic_word TimeOut! status:ffffffed |
125 |
write_nic_word TimeOut! status:ffffffed |
126 |
read_nic_byte TimeOut! status:ffffffed |
127 |
write_nic_byte TimeOut! status:ffffffed |
128 |
read_nic_byte TimeOut! status:ffffffed |
129 |
write_nic_byte TimeOut! status:ffffffed |
130 |
write_nic_dword TimeOut! status:ffffffed |
131 |
read_nic_byte TimeOut! status:ffffffed |
132 |
write_nic_byte TimeOut! status:ffffffed |
133 |
read_nic_byte TimeOut! status:ffffffed |
134 |
write_nic_byte TimeOut! status:ffffffed |
135 |
read_nic_byte TimeOut! status:ffffffed |
136 |
write_nic_byte TimeOut! status:ffffffed |
137 |
read_nic_byte TimeOut! status:ffffffed |
138 |
write_nic_byte TimeOut! status:ffffffed |
139 |
write_nic_dword TimeOut! status:ffffffed |
140 |
read_nic_byte TimeOut! status:ffffffed |
141 |
write_nic_byte TimeOut! status:ffffffed |
142 |
read_nic_byte TimeOut! status:ffffffed |
143 |
write_nic_byte TimeOut! status:ffffffed |
144 |
write_nic_word TimeOut! status:ffffffed |
145 |
read_nic_byte TimeOut! status:ffffffed |
146 |
write_nic_byte TimeOut! status:ffffffed |
147 |
usb 3-1: not running at top speed; connect to a high speed hub |
148 |
usb 3-1: configuration #1 chosen from 1 choice |
149 |
scsi3 : SCSI emulation for USB Mass Storage devices |
150 |
usb-storage: device found at 2 |
151 |
usb-storage: waiting for device to settle before scanning |
152 |
read_nic_byte TimeOut! status:ffffffed |
153 |
rtl8187: WW:Card reset timeout! |
154 |
This is RTL8187B Reset procedure |
155 |
rtl8187: wlan driver removed |
156 |
|
157 |
ehci_hcd 0000:00:1a.7: USB bus 6 deregistered |
158 |
ACPI: PCI interrupt for device 0000:00:1a.7 disabled |
159 |
usb 1-2: new full speed USB device using uhci_hcd and address 3 |
160 |
usb 1-2: configuration #1 chosen from 1 choice |
161 |
rtl8187: Reported EEPROM chip is a 93c46 (1Kbit) |
162 |
rtl8187: Card MAC address is 00:16:44:19:21:a9 |
163 |
rtl8187: WW:Going dooh. >%^|| |
164 |
rtl8187: PAPE from CONFIG2: 0 |
165 |
rtl8187: Driver probe completed |
166 |
|
167 |
udev: renamed network interface wlan0 to wlan1 |
168 |
rtl8187: Card successfully reset |
169 |
This is RTL8187B Reset procedure |
170 |
scsi 3:0:0:0: Direct-Access SanDisk Sansa c250 v03. PQ: 0 ANSI: 0 |
171 |
sd 3:0:0:0: [sdb] 3992576 512-byte hardware sectors (2044 MB) |
172 |
sd 3:0:0:0: [sdb] Write Protect is off |
173 |
sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00 |
174 |
sd 3:0:0:0: [sdb] Assuming drive cache: write through |
175 |
sd 3:0:0:0: [sdb] 3992576 512-byte hardware sectors (2044 MB) |
176 |
sd 3:0:0:0: [sdb] Write Protect is off |
177 |
sd 3:0:0:0: [sdb] Mode Sense: 04 00 00 00 |
178 |
sd 3:0:0:0: [sdb] Assuming drive cache: write through |
179 |
sdb: unknown partition table |
180 |
sd 3:0:0:0: [sdb] Attached SCSI removable disk |
181 |
sd 3:0:0:0: Attached scsi generic sg1 type 0 |
182 |
usb-storage: device scan complete |
183 |
WIRELESS_MODE_G |
184 |
Set chan.call ieee80211_start_bss.in start bss call check.<6>ADDRCONF(NETDEV_UP): wlan1: link is not ready |
185 |
Set chan.call ieee80211_start_bss.in start bss call check.<6>rtl8187: Setting SW wep key |
186 |
|
187 |
|
188 |
|
189 |
-- |
190 |
gentoo-user@l.g.o mailing list |