| 1 |
On Fri, Mar 26, 2010 at 10:23 PM, Stroller |
| 2 |
<stroller@××××××××××××××××××.uk> wrote: |
| 3 |
> |
| 4 |
> On 26 Mar 2010, at 20:17, Paul Hartman wrote: |
| 5 |
>> |
| 6 |
>> ... |
| 7 |
>> Setting up and testing my new system (after wasting nearly 1 month |
| 8 |
>> with bad RAM modules), I got this error today: |
| 9 |
>> |
| 10 |
>> [48055.741389] ata3.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 |
| 11 |
>> frozen |
| 12 |
>> [48055.741393] ata3.00: failed command: READ FPDMA QUEUED |
| 13 |
>> [48055.741398] ata3.00: cmd 60/20:08:38:15:03/01:00:18:00:00/40 tag 1 |
| 14 |
>> ncq 147456 in |
| 15 |
>> [48055.741400] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask |
| 16 |
>> 0x4 (timeout) |
| 17 |
>> [48055.741402] ata3.00: status: { DRDY } |
| 18 |
>> [48055.741405] ata3: hard resetting link |
| 19 |
>> [48056.198746] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 20 |
>> [48056.210514] ata3.00: configured for UDMA/133 |
| 21 |
>> [48056.210518] ata3.00: device reported invalid CHS sector 0 |
| 22 |
>> [48056.210523] ata3: EH complete |
| 23 |
>> |
| 24 |
>> I really don't understand what it means, but the "timeout", "hard |
| 25 |
>> resetting link" and "invalid CHS sector 0" look scary to me... |
| 26 |
> |
| 27 |
> How new is this motherboard? One may see something similar if one connects a |
| 28 |
> SATA2 drive to an older SATA motherboard without the jumper (on the drive) |
| 29 |
> set to restrict it to 1.5 Gbps. |
| 30 |
|
| 31 |
It is a new motherboard with 8 SATA2 headers, 2 SATA3 (6Gbps) and 2 |
| 32 |
eSATA. I'm only using the internal SATA2 ports now, not the SATA3. One |
| 33 |
floppy and one IDE also unused :) |
| 34 |
|
| 35 |
The drive is 2TB and new as well. No jumpers. Thanks. |
Archives