| 1 |
On 2012-01-06, Michael Mol <mikemol@×××××.com> wrote: |
| 2 |
> Grant Edwards wrote: |
| 3 |
>> I've enabled ipv6 support in my kernel and it appears to be working on |
| 4 |
>> the "lo" interface: |
| 5 |
>> |
| 6 |
>> # ip -6 addr show lo |
| 7 |
>> |
| 8 |
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 |
| 9 |
>> inet6 ::1/128 scope host |
| 10 |
>> valid_lft forever preferred_lft forever |
| 11 |
>> |
| 12 |
>> # ping6 -c3 ::1 |
| 13 |
>> |
| 14 |
>> PING ::1(::1) 56 data bytes |
| 15 |
>> 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.022 ms |
| 16 |
>> 64 bytes from ::1: icmp_seq=2 ttl=64 time=0.021 ms |
| 17 |
>> 64 bytes from ::1: icmp_seq=3 ttl=64 time=0.021 ms |
| 18 |
>> |
| 19 |
>> --- ::1 ping statistics --- |
| 20 |
>> 3 packets transmitted, 3 received, 0% packet loss, time 1998ms |
| 21 |
>> rtt min/avg/max/mdev = 0.021/0.021/0.022/0.003 ms |
| 22 |
>> |
| 23 |
>> And the other interfaces all have link-local addresses: |
| 24 |
>> |
| 25 |
>> # ip -6 addr show eth1 |
| 26 |
>> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 |
| 27 |
>> inet6 fe80::216:17ff:fe84:a7b3/64 scope link |
| 28 |
>> valid_lft forever preferred_lft forever |
| 29 |
>> |
| 30 |
>> But I can't ping6 any of the "real" interfaces (or any external |
| 31 |
>> address): |
| 32 |
>> |
| 33 |
>> # ping6 -c3 fe80::216:17ff:fe84:a7b3 |
| 34 |
>> |
| 35 |
>> connect: Invalid argument |
| 36 |
>> |
| 37 |
>> Why can I ping "lo" at ::1 and not "eth1" at fe80::216:17ff:fe84:a7b3? |
| 38 |
>> |
| 39 |
>> I'm guessing there might other packages I have to re-emerge with the |
| 40 |
>> ipv6 use flag. But, I do not want to rebuild everything capable of |
| 41 |
>> supporting ipv6, since there are only a few selected programs that |
| 42 |
>> I'll be using with ipv6. I thought I might have to rebuild glibc, but |
| 43 |
>> it doens't list ipv6 as one of it's use flags. |
| 44 |
>> |
| 45 |
>> Any hints? |
| 46 |
>> |
| 47 |
> |
| 48 |
> ping6 -c3 fe80::216:17ff:fe84:a7b3%eth0 |
| 49 |
> |
| 50 |
> Link-local addresses are only valid at the link-level scope, and you |
| 51 |
> have to specify which link you're referring to. Global-scope |
| 52 |
> addresses don't have the same limitation. |
| 53 |
|
| 54 |
Yup. The other option is to use -I to specify the interface. |
| 55 |
|
| 56 |
I missed that the first time I read through the man page because I was |
| 57 |
expecting it to be "-i" (I guess that was tcpdump). |
| 58 |
|
| 59 |
-- |
| 60 |
Grant Edwards grant.b.edwards Yow! DIDI ... is that a |
| 61 |
at MARTIAN name, or, are we |
| 62 |
gmail.com in ISRAEL? |
Archives