| 1 |
On Sun, 3 Sep 2006, Dan Johansson wrote: |
| 2 |
|
| 3 |
> As dmraid is hard masked and it's future doesn't look to bright I have decided |
| 4 |
> to give software raid a try |
| 5 |
> (http://www.gentoo.org/doc/en/gentoo-x86-tipsntricks.xml). Everything works |
| 6 |
> fine with one exception, when I boot the system I'm getting the following |
| 7 |
> error: |
| 8 |
> Starting up RAID devices (mdadm) |
| 9 |
> mdadm: No arrays found in config file |
| 10 |
> |
| 11 |
> But the system comes up correctly. My /etc/mdadm.conf file contains the |
| 12 |
> following: |
| 13 |
> ARRAY /dev/md4 level=raid1 num-devices=2 |
| 14 |
> UUID=f03ab886:29539a16:60351ac2:644491c6 |
| 15 |
> ARRAY /dev/md3 level=raid1 num-devices=2 |
| 16 |
> UUID=b4721e3b:7eab0b51:231a400e:3e228ff3 |
| 17 |
> ARRAY /dev/md2 level=raid1 num-devices=2 |
| 18 |
> UUID=b660191e:81583b46:491c57c8:2ebb62b2 |
| 19 |
> ARRAY /dev/md1 level=raid1 num-devices=2 |
| 20 |
> UUID=f3134895:0a4f292b:8b078635:1f67f091 |
| 21 |
> |
| 22 |
> and cat /proc/mdstat gives: |
| 23 |
> Personalities : [raid1] |
| 24 |
> md1 : active raid1 hdc1[1] hda1[0] |
| 25 |
> 32000 blocks [2/2] [UU] |
| 26 |
> md2 : active raid1 hdc2[1] hda2[0] |
| 27 |
> 505920 blocks [2/2] [UU] |
| 28 |
> md3 : active raid1 hdc3[1] hda3[0] |
| 29 |
> 497920 blocks [2/2] [UU] |
| 30 |
> md4 : active raid1 hdc4[1] hda4[0] |
| 31 |
> 79377088 blocks [2/2] [UU] |
| 32 |
> unused devices: <none> |
| 33 |
> |
| 34 |
> Any ideas why mdadm (mdadm -As) can not find my arrays at boot time. |
| 35 |
> -- |
| 36 |
> Dan Johansson, <http://www.dmj.nu> |
| 37 |
> *************************************************** |
| 38 |
> This message is printed on 100% recycled electrons! |
| 39 |
> *************************************************** |
| 40 |
> |
| 41 |
|
| 42 |
Is /etc/mdadm.conf the correct location? Debian uses |
| 43 |
/etc/mdadm/mdadm.conf. Are you using a special initrd/initramfs boot |
| 44 |
method? |
| 45 |
-- |
| 46 |
gentoo-user@g.o mailing list |
Archives