| 1 |
hi! |
| 2 |
I'm having serious problems with cdrecord (I actually use k3b, but it |
| 3 |
calls cdrecord). Every once in a while it used not to finish recording |
| 4 |
and exiting with errors. I lowered down the speed to 8x (the burner |
| 5 |
reportedly can do a 52x) and this helped finishing burnings. But now I |
| 6 |
wasted 2 cds in a row, with 8x speed. The end of the log is below. I |
| 7 |
really don't know how to handle it. Any help? |
| 8 |
|
| 9 |
Yours truly, |
| 10 |
Matias |
| 11 |
|
| 12 |
Log: |
| 13 |
|
| 14 |
.... snip ..... |
| 15 |
|
| 16 |
Track 01: 187 of 701 MB written (fifo 100%) [buf 99%] 8.0x. |
| 17 |
Track 01: 188 of 701 MB written (fifo 100%) [buf 99%] 8.2x. |
| 18 |
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error |
| 19 |
CDB: 2A 00 00 01 79 16 00 00 1F 00 |
| 20 |
status: 0x2 (CHECK CONDITION) |
| 21 |
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 |
| 22 |
Sense Key: 0x4 Hardware Error, Segment 0 |
| 23 |
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 |
| 24 |
Sense flags: Blk 0 (not valid) |
| 25 |
resid: 63488 |
| 26 |
cmd finished after 0.052s timeout 200s |
| 27 |
/usr/bin/cdrecord: A write error occured. |
| 28 |
/usr/bin/cdrecord: Please properly read the error message above. |
| 29 |
write track data: error after 197701632 bytes |
| 30 |
Writing time: 190.103s |
| 31 |
Average write speed 25.7x. |
| 32 |
Min drive buffer fill was 94% |
| 33 |
Fixating... |
| 34 |
Fixating time: 1.636s |
| 35 |
/usr/bin/cdrecord: fifo had 3242 puts and 3115 gets. |
| 36 |
/usr/bin/cdrecord: fifo was 0 times empty and 2968 times full, min fill was 92%. |
| 37 |
-- |
| 38 |
gentoo-user@g.o mailing list |
Archives