1 |
Hi, |
2 |
A new system has 2 SATA controllers, 6 SATA ports, 3 drives and 1 |
3 |
CDRW. Without opening the box is there a way I can determine which |
4 |
drives are hooked to the Intel controller vs which are hooked to the |
5 |
Marvell? |
6 |
|
7 |
Thanks, |
8 |
Mark |
9 |
|
10 |
|
11 |
|
12 |
keeper ~ # lspci -k | grep SATA |
13 |
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA |
14 |
AHCI Controller |
15 |
06:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II |
16 |
Controller (rev b2) |
17 |
keeper ~ # |
18 |
Cdrecord-ProDVD-ProBD-Clone 2.01.01a77 (x86_64-unknown-linux-gnu) |
19 |
Copyright (C) 1995-2010 Jörg Schilling |
20 |
Linux sg driver version: 3.5.34 |
21 |
Using libscg version 'schily-0.9'. |
22 |
scsibus0: |
23 |
0,0,0 0) 'ATA ' 'WDC WD10EARS-00Y' '80.0' Disk |
24 |
0,1,0 1) * |
25 |
0,2,0 2) * |
26 |
0,3,0 3) * |
27 |
0,4,0 4) * |
28 |
0,5,0 5) * |
29 |
0,6,0 6) * |
30 |
0,7,0 7) * |
31 |
scsibus1: |
32 |
1,0,0 100) 'Optiarc ' 'DVD RW AD-7241S ' '1.03' Removable CD-ROM |
33 |
1,1,0 101) * |
34 |
1,2,0 102) * |
35 |
1,3,0 103) * |
36 |
1,4,0 104) * |
37 |
1,5,0 105) * |
38 |
1,6,0 106) * |
39 |
1,7,0 107) * |
40 |
scsibus2: |
41 |
2,0,0 200) 'ATA ' 'WDC WD10EARS-00Y' '80.0' Disk |
42 |
2,1,0 201) * |
43 |
2,2,0 202) * |
44 |
2,3,0 203) * |
45 |
2,4,0 204) * |
46 |
2,5,0 205) * |
47 |
2,6,0 206) * |
48 |
2,7,0 207) * |
49 |
scsibus4: |
50 |
4,0,0 400) 'ATA ' 'WDC WD10EARS-00Y' '80.0' Disk |
51 |
4,1,0 401) * |
52 |
4,2,0 402) * |
53 |
4,3,0 403) * |
54 |
4,4,0 404) * |
55 |
4,5,0 405) * |
56 |
4,6,0 406) * |
57 |
4,7,0 407) * |
58 |
keeper ~ # |