Re: [gentoo-user] Kernel panic - not syncing: No working init found.

On 06/03/2020 11:28 AM, Dale wrote:
> tedheadster wrote:
>> Yes, you do need to capture the kernel output.
>>
>> The usual way is to hook up a serial cable to another computer and
>> pipe the output to it. You interrupt the boot (usually by hitting
>> <shift> or <tab> in GRUB), and then edit the kernel command line thus:
>>
>> console=tty1 console=ttyS0,115200n8
>>
>> If you can do that you can give us some debug output.
>>
>> - Matthew
>>
>>
>
>
> Could she boot from some other media, mount the partitions to get to
> dmesg and get it from that?  Or since it may not be mounting any
> partitons, would that lead down the wrong path if it is outdated? 
>
> Dale
>
> :-)  :-) 

When the screen boots I see an output:

"Decompressing Linux - Parsing ELF done.
Booting the kernel


... next section scrolls very fast.

Here is a link to a video (if you can slow it down)
https://vimeo.com/user117037821/review/425595417/79e330424c

The good news is that I had a luck to boot it; here output of "df -h

df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda4       458G  372G   63G  86% /
tmpfs           396M  1.2M  395M   1% /run
dev              10M     0   10M   0% /dev
shm             2.0G  4.0K  2.0G   1% /dev/shm
cgroup_root      10M     0   10M   0% /sys/fs/cgroup
none            2.0G     0  2.0G   0% /run/user/1000

and "dmesg"

dmesg
[    0.000000] Linux version 4.9.72-gentoo (root@syscon4) (gcc version
6.4.0 (Gentoo 6.4.0-r1 p1.3) ) #3 SMP Wed Jun 3 09:12:45 MDT 2020
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.72-gentoo
root=/dev/sda4 ro
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff]
reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff]
ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff]
ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff]
reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer P5E3 Deluxe/P5E3 Deluxe, BIOS
1401    07/17/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 000000000 mask F00000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC-
WT
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped
at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x02120000, 0x02120fff] PGTABLE
[    0.000000] BRK [0x02121000, 0x02121fff] PGTABLE
[    0.000000] BRK [0x02122000, 0x02122fff] PGTABLE
[    0.000000] BRK [0x02123000, 0x02123fff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBB80 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000CFF80000 00003C (v01 A_M_I_ OEMRSDT
07000817 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFF80200 000084 (v02 A_M_I_ OEMFACP
07000817 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFF80440 009CA9 (v01 A0834  A0834088
00000088 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000CFF8E000 000040
[    0.000000] ACPI: APIC 0x00000000CFF80390 00006C (v01 A_M_I_ OEMAPIC
07000817 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFF80400 00003C (v01 A_M_I_ OEMMCFG
07000817 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFF8E040 000081 (v01 A_M_I_ AMI_OEM
07000817 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFF8A0F0 000038 (v01 A_M_I_ OEMHPET
07000817 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000CFF8A130 0000B0 (v01 A_M_I_ OEMOSFR
07000817 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff7ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000012fffffff]
[    0.000000] On node 0 totalpages: 1048350
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13246 pages used for memmap
[    0.000000]   DMA32 zone: 847744 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff8e000-0xcffdffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4
nr_node_ids:1
[    0.000000] percpu: Embedded 34 pages/cpu @ffff88012fc00000 s100952
r8192 d30120 u524288
[    0.000000] pcpu-alloc: s100952 r8192 d30120 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1031947
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.72-gentoo
root=/dev/sda4 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4043632K/4193400K available (9417K kernel code,
1184K rwdata, 2912K rodata, 1164K init, 800K bss, 149768K reserved, 0K
cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2833.049 MHz processor
[    0.002002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5666.09 BogoMIPS (lpj=2833049)
[    0.002181] pid_max: default: 32768 minimum: 301
[    0.002273] ACPI: Core revision 20160831
[    0.006411] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.006543] Security Framework initialized
[    0.006632] SELinux:  Initializing.
[    0.006727] SELinux:  Starting in permissive mode
[    0.006923] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[    0.008539] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[    0.009287] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009381] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes)
[    0.009722] CPU: Physical Processor ID: 0
[    0.009811] CPU: Processor Core ID: 0
[    0.009899] mce: CPU supports 6 MCE banks
[    0.009992] CPU0: Thermal monitoring enabled (TM2)
[    0.010093] process: using mwait in idle threads
[    0.010185] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.010274] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.010713] Freeing SMP alternatives memory: 36K
[    0.011087] smpboot: Max logical packages: 1
[    0.011511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.022000] smpboot: CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9550  @
2.83GHz (family: 0x6, model: 0x17, stepping: 0x7)
[    0.022000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU
driver.
[    0.022000] ... version:                2
[    0.022000] ... bit width:              40
[    0.022000] ... generic registers:      2
[    0.022000] ... value mask:             000000ffffffffff
[    0.022000] ... max period:             000000007fffffff
[    0.022000] ... fixed-purpose events:   3
[    0.022000] ... event mask:             0000000700000003
[    0.022377] x86: Booting SMP configuration:
[    0.022466] .... node  #0, CPUs:      #1 #2 #3
[    0.028035] x86: Booted up 1 node, 4 CPUs
[    0.028192] smpboot: Total of 4 processors activated (22664.39 BogoMIPS)
[    0.029205] devtmpfs: initialized
[    0.029245] PM: Registering ACPI NVS region [mem
0xcff8e000-0xcffdffff] (335872 bytes)
[    0.030071] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.030239] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.030389] RTC time: 17:54:32, date: 06/03/20
[    0.030547] NET: Registered protocol family 16
[    0.034004] cpuidle: using governor ladder
[    0.037003] cpuidle: using governor menu
[    0.037146] ACPI: bus type PCI registered
[    0.037288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.037442] PCI: not using MMCONFIG
[    0.037529] PCI: Using configuration type 1 for base access
[    0.044040] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.044171] ACPI: Added _OSI(Module Device)
[    0.044171] ACPI: Added _OSI(Processor Device)
[    0.044234] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044323] ACPI: Added _OSI(Processor Aggregator Device)
[    0.045025] ACPI: Executed 1 blocks of module-level executable AML code
[    0.050057] ACPI: Dynamic OEM Table Load:
[    0.050199] ACPI: SSDT 0xFFFF88012A4E6600 0001D2 (v01 AMI    CPU1PM
00000001 INTL 20060113)
[    0.050597] ACPI: Dynamic OEM Table Load:
[    0.050737] ACPI: SSDT 0xFFFF88012A4E6800 000143 (v01 AMI    CPU2PM
00000001 INTL 20060113)
[    0.051125] ACPI: Dynamic OEM Table Load:
[    0.051276] ACPI: SSDT 0xFFFF88012A4E6A00 000143 (v01 AMI    CPU3PM
00000001 INTL 20060113)
[    0.051655] ACPI: Dynamic OEM Table Load:
[    0.051795] ACPI: SSDT 0xFFFF88012A4E6C00 000143 (v01 AMI    CPU4PM
00000001 INTL 20060113)
[    0.052289] ACPI: Interpreter enabled
[    0.052393] ACPI: (supports S0 S1 S3 S4 S5)
[    0.052482] ACPI: Using IOAPIC for interrupt routing
[    0.052596] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.053505] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
ACPI motherboard resources
[    0.053659] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000]
with a huge-page mapping due to MTRR override.
[    0.054022] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[    0.059542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.059636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[    0.059789] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.059952] PCI host bridge to bus 0000:00
[    0.060003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.060094] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.060194] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[    0.060345] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff window]
[    0.060496] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xffffffff window]
[    0.060647] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.061007] pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000
[    0.061091] pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400
[    0.061122] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.061160] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.061304] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.061339] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.061418] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.061545] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.061579] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.061657] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.062039] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.062073] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.062149] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.062288] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.062303] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
[    0.062375] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.062414] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.062543] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.062556] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[    0.062616] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.062688] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.062745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.062787] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.062915] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.063044] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.063085] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.063218] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.063278] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.063319] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.063447] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.063481] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.063558] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.063685] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.063719] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.063798] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.063924] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.063958] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.064039] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.064171] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.064186] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff]
[    0.064266] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.064307] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.064432] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.064508] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.064636] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[    0.064703] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by
ICH6 ACPI/GPIO/TCO
[    0.064857] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by
ICH6 GPIO
[    0.064949] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0294 (mask 0003)
[    0.065091] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[    0.065107] pci 0000:00:1f.2: reg 0x10: [io  0xa000-0xa007]
[    0.065119] pci 0000:00:1f.2: reg 0x14: [io  0x9c00-0x9c03]
[    0.065125] pci 0000:00:1f.2: reg 0x18: [io  0x9880-0x9887]
[    0.065131] pci 0000:00:1f.2: reg 0x1c: [io  0x9800-0x9803]
[    0.065137] pci 0000:00:1f.2: reg 0x20: [io  0x9480-0x948f]
[    0.065143] pci 0000:00:1f.2: reg 0x24: [io  0x9400-0x940f]
[    0.065233] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.065245] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[    0.065261] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.065340] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.065350] pci 0000:00:1f.5: reg 0x10: [io  0xb000-0xb007]
[    0.065356] pci 0000:00:1f.5: reg 0x14: [io  0xac00-0xac03]
[    0.065362] pci 0000:00:1f.5: reg 0x18: [io  0xa880-0xa887]
[    0.065368] pci 0000:00:1f.5: reg 0x1c: [io  0xa800-0xa803]
[    0.065374] pci 0000:00:1f.5: reg 0x20: [io  0xa480-0xa48f]
[    0.065380] pci 0000:00:1f.5: reg 0x24: [io  0xa400-0xa40f]
[    0.065498] pci 0000:01:00.0: [10de:0400] type 00 class 0x030000
[    0.065508] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.065516] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff
64bit pref]
[    0.065525] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.065531] pci 0000:01:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.065536] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref]
[    0.065611] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.065701] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.065703] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
[    0.065706] pci 0000:00:01.0:   bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[    0.065741] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.065837] pci 0000:00:1c.0:   bridge window [mem
0xf8f00000-0xf8ffffff 64bit pref]
[    0.065884] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.066087] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[    0.066099] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.066150] pci 0000:03:00.0: PME# supported from D3hot
[    0.066217] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.066239] pci 0000:03:00.1: reg 0x10: [io  0xec00-0xec07]
[    0.066247] pci 0000:03:00.1: reg 0x14: [io  0xe880-0xe883]
[    0.066256] pci 0000:03:00.1: reg 0x18: [io  0xe800-0xe807]
[    0.066265] pci 0000:03:00.1: reg 0x1c: [io  0xe480-0xe483]
[    0.066274] pci 0000:03:00.1: reg 0x20: [io  0xe400-0xe40f]
[    0.066374] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[    0.066534] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.066625] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.066627] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.066681] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[    0.066703] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.066713] pci 0000:02:00.0: reg 0x18: [io  0xd800-0xd8ff]
[    0.066751] pci 0000:02:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.066809] pci 0000:02:00.0: supports D1 D2
[    0.066810] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.069015] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.069110] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.069113] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.069169] pci 0000:05:03.0: [11c1:5811] type 00 class 0x0c0010
[    0.069183] pci 0000:05:03.0: reg 0x10: [mem 0xfebff000-0xfebfffff]
[    0.069257] pci 0000:05:03.0: supports D1 D2
[    0.069258] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.069325] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.069419] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.069423] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7
window] (subtractive decode)
[    0.069425] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff
window] (subtractive decode)
[    0.069426] pci 0000:00:1e.0:   bridge window [mem
0x000a0000-0x000bffff window] (subtractive decode)
[    0.069427] pci 0000:00:1e.0:   bridge window [mem
0x000d0000-0x000dffff window] (subtractive decode)
[    0.069429] pci 0000:00:1e.0:   bridge window [mem
0xd0000000-0xffffffff window] (subtractive decode)
[    0.070099] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[    0.070532] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[    0.071044] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[    0.071485] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12
*14 15)
[    0.071916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[    0.072524] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12
14 15)
[    0.072955] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 *15)
[    0.073413] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[    0.074207] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.074404] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.074404] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.075002] vgaarb: loaded
[    0.075089] vgaarb: bridge control possible 0000:01:00.0
[    0.075235] SCSI subsystem initialized
[    0.075337] libata version 3.00 loaded.
[    0.075337] ACPI: bus type USB registered
[    0.075337] usbcore: registered new interface driver usbfs
[    0.075337] usbcore: registered new interface driver hub
[    0.075373] usbcore: registered new device driver usb
[    0.075478] pps_core: LinuxPPS API ver. 1 registered
[    0.076002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@×××××.it>
[    0.076165] PTP clock support registered
[    0.076282] Advanced Linux Sound Architecture Driver Initialized.
[    0.076282] PCI: Using ACPI for IRQ routing
[    0.081500] PCI: pci_cache_line_size set to 64 bytes
[    0.081548] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.081549] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[    0.081708] NetLabel: Initializing
[    0.081708] NetLabel:  domain hash size = 128
[    0.081708] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.082017] NetLabel:  unlabeled traffic allowed by default
[    0.082127] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[    0.082141] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.082356] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.084028] clocksource: Switched to clocksource hpet
[    0.090733] VFS: Disk quotas dquot_6.6.0
[    0.090839] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[    0.094628] pnp: PnP ACPI init
[    0.094788] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.094881] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.094937] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.095160] pnp 00:02: [dma 2]
[    0.095200] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.095254] system 00:03: [io  0x0290-0x0297] has been reserved
[    0.095346] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.095477] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.095568] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.095659] system 00:04: [io  0x0480-0x04bf] has been reserved
[    0.095749] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.095840] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.095931] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.096027] system 00:04: [mem 0xffa00000-0xffafffff] has been reserved
[    0.096118] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.096209] system 00:04: [mem 0xffe00000-0xffefffff] has been reserved
[    0.096300] system 00:04: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.096391] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.096484] system 00:05: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.096576] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.096742] pnp 00:06: [dma 0 disabled]
[    0.096794] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.096857] system 00:07: [mem 0xfec00000-0xfec00fff] could not be
reserved
[    0.096949] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.097046] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.097094] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[    0.097148] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.097240] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.097618] system 00:0a: [mem 0x00000000-0x0009ffff] could not be
reserved
[    0.097710] system 00:0a: [mem 0x000c0000-0x000cffff] could not be
reserved
[    0.097801] system 00:0a: [mem 0x000e0000-0x000fffff] could not be
reserved
[    0.097893] system 00:0a: [mem 0x00100000-0xcfffffff] could not be
reserved
[    0.097985] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.098091] pnp: PnP ACPI: found 11 devices
[    0.102717] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[    0.102882] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to
[bus 04] add_size 1000
[    0.102884] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
[    0.102891] pci 0000:00:1c.4: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align
100000
[    0.102897] pci 0000:00:1c.5: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align
100000
[    0.102908] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 400000 min_align 100000
[    0.102910] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x004fffff]
res_to_dev_res add_size 400000 min_align 100000
[    0.102911] pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] res_to_dev_res add_size 200000 min_align 100000
[    0.102913] pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x002fffff 64bit
pref] res_to_dev_res add_size 200000 min_align 100000
[    0.102914] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] res_to_dev_res add_size 200000 min_align 100000
[    0.102916] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x002fffff 64bit
pref] res_to_dev_res add_size 200000 min_align 100000
[    0.102917] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff]
res_to_dev_res add_size 1000 min_align 1000
[    0.102919] pci 0000:00:1c.0: res[7]=[io  0x1000-0x1fff]
res_to_dev_res add_size 1000 min_align 1000
[    0.102923] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0000000-0xf03fffff]
[    0.103021] pci 0000:00:1c.4: BAR 9: assigned [mem
0xf0400000-0xf05fffff 64bit pref]
[    0.103174] pci 0000:00:1c.5: BAR 9: assigned [mem
0xf0600000-0xf07fffff 64bit pref]
[    0.103325] pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.103417] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.103507] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.103598] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
[    0.103690] pci 0000:00:01.0:   bridge window [mem
0xd0000000-0xdfffffff 64bit pref]
[    0.103842] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.103932] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.104029] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    0.104121] pci 0000:00:1c.0:   bridge window [mem
0xf8f00000-0xf8ffffff 64bit pref]
[    0.104275] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.104365] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.104457] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.104549] pci 0000:00:1c.4:   bridge window [mem
0xf0400000-0xf05fffff 64bit pref]
[    0.104703] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.104793] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.104885] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.104977] pci 0000:00:1c.5:   bridge window [mem
0xf0600000-0xf07fffff 64bit pref]
[    0.105135] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.105226] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.105322] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.105323] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.105325] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[    0.105326] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff
window]
[    0.105327] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff
window]
[    0.105329] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.105330] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
[    0.105331] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff
64bit pref]
[    0.105333] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.105334] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[    0.105335] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff
64bit pref]
[    0.105336] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.105337] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.105339] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff
64bit pref]
[    0.105340] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.105341] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.105343] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff
64bit pref]
[    0.105344] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.105345] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.105347] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.105348] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff
window]
[    0.105349] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff
window]
[    0.105350] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff
window]
[    0.105409] NET: Registered protocol family 2
[    0.105649] TCP established hash table entries: 32768 (order: 6,
262144 bytes)
[    0.105889] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.106130] TCP: Hash tables configured (established 32768 bind 32768)
[    0.106256] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.106368] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.106509] NET: Registered protocol family 1
[    0.106777] RPC: Registered named UNIX socket transport module.
[    0.106867] RPC: Registered udp transport module.
[    0.106956] RPC: Registered tcp transport module.
[    0.107050] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.108097] pci 0000:01:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[    0.108251] pci 0000:03:00.0: async suspend disabled to avoid
multi-function power-on ordering issue
[    0.108405] pci 0000:03:00.1: async suspend disabled to avoid
multi-function power-on ordering issue
[    0.108562] PCI: CLS 32 bytes, default 64
[    0.108610] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.108701] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped
at [ffff8800cbf80000-ffff8800cff7ffff]
[    0.109323] Scanning for low memory corruption every 60 seconds
[    0.109641] audit: initializing netlink subsys (disabled)
[    0.109737] audit: type=2000 audit(1591206872.108:1): initialized
[    0.110166] workingset: timestamp_bits=56 max_order=20 bucket_order=0
[    0.112495] NFS: Registering the id_resolver key type
[    0.112589] Key type id_resolver registered
[    0.112677] Key type id_legacy registered
[    0.112873] SELinux:  Registering netfilter hooks
[    0.113028] cryptomgr_test (46) used greatest stack depth: 15416
bytes left
[    0.113196] cryptomgr_test (50) used greatest stack depth: 15224
bytes left
[    0.114656] NET: Registered protocol family 38
[    0.114789] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[    0.114940] io scheduler noop registered
[    0.115052] io scheduler deadline registered
[    0.115150] io scheduler cfq registered (default)
[    0.115418] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.115859] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.116012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.136586] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[    0.137231] Non-volatile memory driver v1.3
[    0.137366] Linux agpgart interface v0.103
[    0.137560] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.137715] ACPI: Power Button [PWRB]
[    0.137839] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.137990] ACPI: Power Button [PWRF]
[    0.138367] [drm] Initialized
[    0.141928] brd: module loaded
[    0.143740] loop: module loaded
[    0.143887] ahci 0000:03:00.0: version 3.0
[    0.154050] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps
0x3 impl SATA mode
[    0.154210] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio
slum part
[    0.154645] scsi host0: ahci
[    0.154895] scsi host1: ahci
[    0.155043] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port
0xfeafe100 irq 16
[    0.155194] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port
0xfeafe180 irq 16
[    0.155377] ata_piix 0000:00:1f.2: version 2.13
[    0.155443] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.156447] scsi host2: ata_piix
[    0.156687] scsi host3: ata_piix
[    0.156824] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma
0x9480 irq 22
[    0.156917] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma
0x9488 irq 22
[    0.157090] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.159439] scsi host4: ata_piix
[    0.159680] scsi host5: ata_piix
[    0.159813] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma
0xa480 irq 22
[    0.159905] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma
0xa488 irq 22
[    0.160072] tun: Universal TUN/TAP device driver, 1.6
[    0.160178] tun: (C) 1999-2004 Max Krasnyansky <maxk@××××××××.com>
[    0.160338] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.160428] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.160531] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[    0.160622] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.160723] sky2: driver version 1.30
[    0.160862] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    0.161208] sky2 0000:02:00.0 eth0: addr 00:1d:60:de:a6:11
[    0.161407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.161497] ehci-pci: EHCI PCI platform driver
[    0.161669] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.161817] ehci-pci 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[    0.161976] ehci-pci 0000:00:1a.7: debug port 1
[    0.165966] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.165975] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    0.173017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.173157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.173248] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.173399] usb usb1: Product: EHCI Host Controller
[    0.173488] usb usb1: Manufacturer: Linux 4.9.72-gentoo ehci_hcd
[    0.173578] usb usb1: SerialNumber: 0000:00:1a.7
[    0.173784] hub 1-0:1.0: USB hub found
[    0.173878] hub 1-0:1.0: 6 ports detected
[    0.174178] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.174329] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[    0.174488] ehci-pci 0000:00:1d.7: debug port 1
[    0.178478] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.178486] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    0.185017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.185140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.185231] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.185382] usb usb2: Product: EHCI Host Controller
[    0.185471] usb usb2: Manufacturer: Linux 4.9.72-gentoo ehci_hcd
[    0.185561] usb usb2: SerialNumber: 0000:00:1d.7
[    0.185759] hub 2-0:1.0: USB hub found
[    0.185852] hub 2-0:1.0: 6 ports detected
[    0.186076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.186168] ohci-pci: OHCI PCI platform driver
[    0.186266] uhci_hcd: USB Universal Host Controller Interface driver
[    0.186418] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.186564] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[    0.186733] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.186857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.186949] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.187117] usb usb3: Product: UHCI Host Controller
[    0.187206] usb usb3: Manufacturer: Linux 4.9.72-gentoo uhci_hcd
[    0.187296] usb usb3: SerialNumber: 0000:00:1a.0
[    0.187491] hub 3-0:1.0: USB hub found
[    0.187585] hub 3-0:1.0: 2 ports detected
[    0.187810] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.187960] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[    0.188151] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.188275] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.188366] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.188516] usb usb4: Product: UHCI Host Controller
[    0.188605] usb usb4: Manufacturer: Linux 4.9.72-gentoo uhci_hcd
[    0.188695] usb usb4: SerialNumber: 0000:00:1a.1
[    0.188892] hub 4-0:1.0: USB hub found
[    0.188985] hub 4-0:1.0: 2 ports detected
[    0.189219] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.189364] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[    0.189532] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.189654] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.189745] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.189896] usb usb5: Product: UHCI Host Controller
[    0.189985] usb usb5: Manufacturer: Linux 4.9.72-gentoo uhci_hcd
[    0.190091] usb usb5: SerialNumber: 0000:00:1a.2
[    0.190288] hub 5-0:1.0: USB hub found
[    0.190382] hub 5-0:1.0: 2 ports detected
[    0.190598] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.190743] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[    0.190912] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.191050] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.191142] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.191292] usb usb6: Product: UHCI Host Controller
[    0.191381] usb usb6: Manufacturer: Linux 4.9.72-gentoo uhci_hcd
[    0.191471] usb usb6: SerialNumber: 0000:00:1d.0
[    0.191666] hub 6-0:1.0: USB hub found
[    0.191759] hub 6-0:1.0: 2 ports detected
[    0.191979] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.192145] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[    0.192319] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.192442] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.192533] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.192684] usb usb7: Product: UHCI Host Controller
[    0.192773] usb usb7: Manufacturer: Linux 4.9.72-gentoo uhci_hcd
[    0.192863] usb usb7: SerialNumber: 0000:00:1d.1
[    0.193064] hub 7-0:1.0: USB hub found
[    0.193158] hub 7-0:1.0: 2 ports detected
[    0.193374] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.193518] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[    0.193687] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.193809] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.193900] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    0.194070] usb usb8: Product: UHCI Host Controller
[    0.194159] usb usb8: Manufacturer: Linux 4.9.72-gentoo uhci_hcd
[    0.194249] usb usb8: SerialNumber: 0000:00:1d.2
[    0.194444] hub 8-0:1.0: USB hub found
[    0.194537] hub 8-0:1.0: 2 ports detected
[    0.194756] usbcore: registered new interface driver usb-storage
[    0.194874] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.194964] i8042: PNP: PS/2 appears to have AUX port disabled, if
this is incorrect please boot with i8042.nopnp
[    0.195874] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.196066] mousedev: PS/2 mouse device common for all mice
[    0.196320] rtc_cmos 00:01: RTC can wake from S4
[    0.196551] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.196659] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[    0.196882] ACPI Warning: SystemIO range
0x0000000000000400-0x000000000000041F conflicts with OpRegion
0x0000000000000400-0x000000000000040F (\SMRG) (20160831/utaddress-247)
[    0.197166] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[    0.197430] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel@××××××.com
[    0.197594] hidraw: raw HID events driver (C) Jiri Kosina
[    0.197805] usbcore: registered new interface driver usbhid
[    0.197895] usbhid: USB HID core driver
[    0.198412] Netfilter messages via NETLINK v0.30.
[    0.198572] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.198703] ctnetlink v0.93: registering with nfnetlink.
[    0.198853] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.198958] Initializing XFRM netlink socket
[    0.199170] NET: Registered protocol family 10
[    0.199574] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.199690] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.199892] NET: Registered protocol family 17
[    0.199997] Key type dns_resolver registered
[    0.200338] microcode: sig=0x10677, pf=0x10, revision=0x703
[    0.200488] microcode: Microcode Update Driver: v2.01
<tigran@×××××××××××××××××.uk>, Peter Oruba
[    0.200755] registered taskstats version 1
[    0.201094]   Magic number: 8:917:945
[    0.201233] cpuid cpu0: hash matches
[    0.201330] tty tty2: hash matches
[    0.201438] processor cpu0: hash matches
[    0.201533] console [netcon0] enabled
[    0.201620] netconsole: network logging started
[    0.202140] PM: Hibernation image not present or could not be loaded.
[    0.202141] ALSA device list:
[    0.202234]   No soundcards found.
[    0.461237] ata2: SATA link down (SStatus 0 SControl 300)
[    0.461365] ata1: SATA link down (SStatus 0 SControl 300)
[    0.479813] ata6: SATA link down (SStatus 0 SControl 300)
[    0.490516] ata5: SATA link down (SStatus 0 SControl 300)
[    0.565631] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1988B:
line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[    0.565787] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[    0.565938] snd_hda_codec_analog hdaudioC0D0:    hp_outs=1
(0x11/0x0/0x0/0x0/0x0)
[    0.566094] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
[    0.566185] snd_hda_codec_analog hdaudioC0D0:    dig-out=0x1b/0x0
[    0.566275] snd_hda_codec_analog hdaudioC0D0:    inputs:
[    0.566365] snd_hda_codec_analog hdaudioC0D0:      Front Mic=0x14
[    0.566455] snd_hda_codec_analog hdaudioC0D0:      Rear Mic=0x17
[    0.566545] snd_hda_codec_analog hdaudioC0D0:      Line=0x15
[    0.566635] snd_hda_codec_analog hdaudioC0D0:      CD=0x18
[    0.567391] random: fast init done
[    0.580430] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[    0.582140] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    0.582366] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    0.582599] input: HDA Intel Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    0.582821] input: HDA Intel Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    0.583063] input: HDA Intel Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    0.583295] input: HDA Intel Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    0.583523] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    0.664013] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    0.825034] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[    0.825129] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    0.825226] usb 3-2: Product: USB Receiver
[    0.825315] usb 3-2: Manufacturer: Logitech
[    0.920064] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.920169] ata4.01: SATA link down (SStatus 0 SControl 300)
[    0.920393] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.920492] ata3.01: SATA link down (SStatus 0 SControl 300)
[    0.920589] ata3.01: link offline, clearing class 3 to NONE
[    0.922863] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[    0.927443] ata3.00: configured for UDMA/100
[    0.928463] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223F
SB00 PQ: 0 ANSI: 5
[    0.939271] ata4.00: supports DRM functions and may not be fully
accessible
[    0.939366] ata4.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max
UDMA/133
[    0.939479] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    0.942631] ata4.00: supports DRM functions and may not be fully
accessible
[    0.943187] ata4.00: configured for UDMA/133
[    0.951951] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram
cd/rw xa/form2 cdda tray
[    0.952127] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.952323] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    0.952458] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    0.952724] scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 850
3B6Q PQ: 0 ANSI: 5
[    0.966153] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[    0.966194] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    0.966469] sd 3:0:0:0: [sda] Write Protect is off
[    0.966559] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.966572] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    0.968712]  sda: sda1 sda2 sda3 sda4
[    0.969118] sd 3:0:0:0: [sda] Attached SCSI disk
[    0.969235] md: Waiting for all devices to be available before autodetect
[    0.969326] md: If you don't use raid, use raid=noautodetect
[    0.969618] md: Autodetecting RAID arrays.
[    0.969707] md: Scanned 0 and added 0 devices.
[    0.969795] md: autorun ...
[    0.969882] md: ... autorun DONE.
[    0.970245] EXT4-fs (sda4): couldn't mount as ext3 due to feature
incompatibilities
[    0.979237] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[    0.979393] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[    0.980512] Freeing unused kernel memory: 1164K
[    0.980602] Write protecting the kernel read-only data: 14336k
[    0.981012] Freeing unused kernel memory: 800K
[    0.983687] Freeing unused kernel memory: 1184K
[    1.060644] kbd_mode (131) used greatest stack depth: 14296 bytes left
[    1.068752] loadkeys (132) used greatest stack depth: 13640 bytes left
[    1.068954] init-early.sh (130) used greatest stack depth: 13112
bytes left
[    1.120013] tsc: Refined TSC clocksource calibration: 2833.010 MHz
[    1.120114] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x28d61000994, max_idle_ns: 440795211167 ns
[    1.369021] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    1.506383] usb 1-3: New USB device found, idVendor=0b05, idProduct=1742
[    1.506485] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    1.506595] usb 1-3: Product: 802.11 n WLAN
[    1.506699] usb 1-3: Manufacturer: Ralink
[    1.506799] usb 1-3: SerialNumber: 1.0
[    1.828845] cgroup: cgroup2: unknown option "nsdelegate"
[    1.886281] udevd[558]: starting version 3.2.5
[    1.920715] udevd[559]: starting eudev-3.2.5
[    2.021142] sky2 0000:02:00.0 enp2s0: renamed from eth0
[    2.075268] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0:
USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-2/input2
[    2.123130] vboxdrv: loading out-of-tree module taints kernel.
[    2.123569] vboxdrv: Found 4 processor cores
[    2.123932] vboxdrv: fAsync=0 offMin=0x1ba offMax=0x59e1
[    2.124176] nvidia: module license 'NVIDIA' taints kernel.
[    2.124178] Disabling lock debugging due to kernel taint
[    2.138245] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.138410] [drm] Initialized nvidia-drm 0.0.0 20150116 for
0000:01:00.0 on minor 0
[    2.138416] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.137
Thu Sep 14 13:51:03 PDT 2017
[    2.224063] vboxdrv: TSC mode is Synchronous, tentative frequency
2833158456 Hz
[    2.224064] vboxdrv: Successfully loaded version 5.1.32 (interface
0x002a0000)
[    2.224588] clocksource: Switched to clocksource tsc
[    2.230405] VBoxNetFlt: Successfully started.
[    2.235133] VBoxNetAdp: Successfully started.
[    2.239199] input: Logitech M720 Triathlon as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input11
[    2.239423] logitech-hidpp-device 0003:046D:405E.0004: input,hidraw1:
USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:00:1a.0-2:1
[    2.242751] VBoxPciLinuxInit
[    2.242756] vboxpci: pci-stub module not available, cannot detach PCI
devices
[    2.242757] vboxpci: IOMMU not found (not registered)
[    2.279197] input: Logitech K850 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4062.0005/input/input12
[    2.279374] logitech-hidpp-device 0003:046D:4062.0005: input,hidraw2:
USB HID v1.11 Keyboard [Logitech K850] on usb-0000:00:1a.0-2:2
[    2.287565] input: Logitech K830 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:404C.0006/input/input13
[    2.287796] logitech-hidpp-device 0003:046D:404C.0006: input,hidraw3:
USB HID v1.11 Keyboard [Logitech K830] on usb-0000:00:1a.0-2:3
[    3.198578] udevd (611) used greatest stack depth: 13024 bytes left
[    3.691652] EXT4-fs (sda4): re-mounted. Opts: (null)
[    3.771328] Adding 524284k swap on /dev/sda3.  Priority:-1 extents:1
across:524284k SS
[    4.438572] sky2 0000:02:00.0 enp2s0: enabling interface
[    4.438629] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    7.478169] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full
duplex, flow control both
[    7.478169] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   31.439050] random: crng init done


--
Thelma