1 |
when I load the ohci-mcd (usb) module I get the following message in |
2 |
the kernel log: |
3 |
|
4 |
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
5 |
PCI: Enabling device 0000:00:03.0 (0000 -> 0002) |
6 |
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 |
7 |
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 11 (level, |
8 |
low) -> IRQ 11 |
9 |
PCI: Setting latency timer of device 0000:00:03.0 to 64 |
10 |
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller |
11 |
CPU 0: Machine Check Exception: 0000000000000007 |
12 |
Bank 3: b400000000000833 at 000000001e000004 |
13 |
Kernel panic - not syncing: Unable to continue |
14 |
|
15 |
|
16 |
I am running gentoo with kernel 2.6.13 and dual-boot into windows xp. |
17 |
|
18 |
the usb ports work great in windows, so I don't think it is a hardware problem. |
19 |
|
20 |
any suggestions? |
21 |
|
22 |
|
23 |
here is the output of 'cat /proc/ioports': |
24 |
|
25 |
0000-001f : dma1 |
26 |
0020-0021 : pic1 |
27 |
0040-0043 : timer0 |
28 |
0050-0053 : timer1 |
29 |
0060-006f : keyboard |
30 |
0080-008f : dma page reg |
31 |
00a0-00a1 : pic2 |
32 |
00c0-00df : dma2 |
33 |
00f0-00ff : fpu |
34 |
0170-0177 : ide1 |
35 |
01f0-01f7 : ide0 |
36 |
0376-0376 : ide1 |
37 |
03c0-03df : vga+ |
38 |
03c0-03df : vesafb |
39 |
03f6-03f6 : ide0 |
40 |
0cf8-0cff : PCI conf1 |
41 |
1000-107f : motherboard |
42 |
1000-1003 : PM1a_EVT_BLK |
43 |
1004-1005 : PM1a_CNT_BLK |
44 |
1008-100b : PM_TMR |
45 |
1010-1015 : ACPI CPU throttle |
46 |
1016-1016 : PM2_CNT_BLK |
47 |
1020-1023 : GPE0_BLK |
48 |
1030-1033 : GPE1_BLK |
49 |
1080-10ff : motherboard |
50 |
1100-110f : 0000:00:02.5 |
51 |
1100-1107 : ide0 |
52 |
1108-110f : ide1 |
53 |
1400-141f : 0000:00:02.1 |
54 |
c000-dfff : PCI Bus #01 |
55 |
c000-c07f : 0000:01:00.0 |
56 |
e000-e0ff : 0000:00:02.6 |
57 |
e100-e17f : 0000:00:02.6 |
58 |
e200-e2ff : 0000:00:02.7 |
59 |
e200-e2ff : SiS SI7012 |
60 |
e300-e37f : 0000:00:02.7 |
61 |
e300-e37f : SiS SI7012 |
62 |
e400-e4ff : 0000:00:04.0 |
63 |
e400-e4ff : sis900 |
64 |
|
65 |
|
66 |
here is the output of 'cat /proc/iomem': |
67 |
|
68 |
00000000-0009fbff : System RAM |
69 |
0009fc00-0009ffff : reserved |
70 |
000a0000-000bffff : Video RAM area |
71 |
000c0000-000cbfff : Video ROM |
72 |
000f0000-000fffff : System ROM |
73 |
00100000-1dfeffff : System RAM |
74 |
00100000-00376372 : Kernel code |
75 |
00376373-0046eeff : Kernel data |
76 |
1dff0000-1dffffbf : ACPI Tables |
77 |
1dffffc0-1dffffff : ACPI Non-volatile Storage |
78 |
1e000000-1e000fff : 0000:00:03.0 |
79 |
1e000000-1e000fff : ohci_hcd |
80 |
1e001000-1e001fff : 0000:00:03.1 |
81 |
1e002000-1e002fff : 0000:00:03.2 |
82 |
1e003000-1e003fff : 0000:00:0c.0 |
83 |
a0000000-afffffff : PCI Bus #01 |
84 |
a0000000-a7ffffff : 0000:01:00.0 |
85 |
a0000000-a0ffffff : vesafb |
86 |
e0000000-efffffff : PCI Bus #01 |
87 |
e0000000-e001ffff : 0000:01:00.0 |
88 |
f0000000-f1ffffff : 0000:00:00.0 |
89 |
f2000000-f2000fff : 0000:00:04.0 |
90 |
f2000000-f2000fff : sis900 |
91 |
f2002000-f2003fff : 0000:00:07.0 |
92 |
f2002000-f2003fff : 0000:00:07.0 |
93 |
fff80000-ffffffff : reserved |
94 |
|
95 |
-- |
96 |
gentoo-user@g.o mailing list |