Gentoo Archives: gentoo-ppc-user

From: Gerardo Lisboa <gerardolisboa@×××××.com>
To: gentoo-ppc-user@l.g.o
Subject: Re: [gentoo-ppc-user] Compile error on IDE Power Mac driver
Date: Mon, 07 Nov 2005 11:36:29
Message-Id: e8e1519f0511070335j3a5dac94i@mail.gmail.com
In Reply to: Re: [gentoo-ppc-user] Compile error on IDE Power Mac driver by Charles Trois
Hi,

Have you a separate boot partition using a ext2 fs?

I found that to be the best way to boot using yaboot.

I don't use it mounted on boot time but it is on fstab as /boot.

The root fs is then anything you compiled statically on the kernel (or
the initrd supports).

Best luck.
G.

2005/11/7, Charles Trois <charles.trois@×××××××.fr>:
> Michael Hanselmann a écrit : > > > > You should set CONFIG_BLK_DEV_IDEDMA_PCI, see drivers/ide/ide-dma.c. > > > Thanks. I did that and the kernel compiled without trouble, but, at > boot, I still get the error "cannot open root device". However, there is > a difference: whereas the message said "unknown-block(0,0)", it now > says "unknown-block(3,15)". So it would seem that the device numbers > have changed. > > The result is the same, whether config BLK_DEV_IDE_PMAC_ATA100FIRST is > on or not. > > I take the liberty to attach a copy of my .config and yaboot.conf files > for your inspection. > > Charles > > > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.12-gentoo-r6 > # Mon Nov 7 12:08:15 2005 > # > CONFIG_MMU=y > CONFIG_GENERIC_HARDIRQS=y > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_HAVE_DEC_LOCK=y > CONFIG_PPC=y > CONFIG_PPC32=y > CONFIG_GENERIC_NVRAM=y > CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > CONFIG_CLEAN_COMPILE=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_POSIX_MQUEUE=y > CONFIG_BSD_PROCESS_ACCT=y > # CONFIG_BSD_PROCESS_ACCT_V3 is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > CONFIG_HOTPLUG=y > CONFIG_KOBJECT_UEVENT=y > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_CC_ALIGN_FUNCTIONS=0 > CONFIG_CC_ALIGN_LABELS=0 > CONFIG_CC_ALIGN_LOOPS=0 > CONFIG_CC_ALIGN_JUMPS=0 > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > > # > # Processor > # > CONFIG_6xx=y > # CONFIG_40x is not set > # CONFIG_44x is not set > # CONFIG_POWER3 is not set > # CONFIG_POWER4 is not set > # CONFIG_8xx is not set > # CONFIG_E500 is not set > CONFIG_PPC_FPU=y > CONFIG_ALTIVEC=y > # CONFIG_TAU is not set > # CONFIG_CPU_FREQ is not set > # CONFIG_PPC601_SYNC_FIX is not set > # CONFIG_PM is not set > CONFIG_PPC_STD_MMU=y > > # > # Platform options > # > CONFIG_PPC_MULTIPLATFORM=y > # CONFIG_APUS is not set > # CONFIG_KATANA is not set > # CONFIG_WILLOW is not set > # CONFIG_CPCI690 is not set > # CONFIG_PCORE is not set > # CONFIG_POWERPMC250 is not set > # CONFIG_CHESTNUT is not set > # CONFIG_SPRUCE is not set > # CONFIG_HDPU is not set > # CONFIG_EV64260 is not set > # CONFIG_LOPEC is not set > # CONFIG_MCPN765 is not set > # CONFIG_MVME5100 is not set > # CONFIG_PPLUS is not set > # CONFIG_PRPMC750 is not set > # CONFIG_PRPMC800 is not set > # CONFIG_SANDPOINT is not set > # CONFIG_RADSTONE_PPC7D is not set > # CONFIG_ADIR is not set > # CONFIG_K2 is not set > # CONFIG_PAL4 is not set > # CONFIG_GEMINI is not set > # CONFIG_EST8260 is not set > # CONFIG_SBC82xx is not set > # CONFIG_SBS8260 is not set > # CONFIG_RPX8260 is not set > # CONFIG_TQM8260 is not set > # CONFIG_ADS8272 is not set > # CONFIG_PQ2FADS is not set > # CONFIG_LITE5200 is not set > # CONFIG_MPC834x_SYS is not set > CONFIG_PPC_CHRP=y > CONFIG_PPC_PMAC=y > CONFIG_PPC_PREP=y > CONFIG_PPC_OF=y > CONFIG_PPCBUG_NVRAM=y > # CONFIG_SMP is not set > # CONFIG_PREEMPT is not set > # CONFIG_HIGHMEM is not set > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_MISC=y > CONFIG_PROC_DEVICETREE=y > # CONFIG_PREP_RESIDUAL is not set > # CONFIG_CMDLINE_BOOL is not set > CONFIG_ISA_DMA_API=y > > # > # Bus options > # > # CONFIG_ISA is not set > CONFIG_GENERIC_ISA_DMA=y > CONFIG_PCI=y > CONFIG_PCI_DOMAINS=y > # CONFIG_PCI_LEGACY_PROC is not set > # CONFIG_PCI_NAMES is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # Advanced setup > # > # CONFIG_ADVANCED_OPTIONS is not set > > # > # Default settings for advanced configuration options are used > # > CONFIG_HIGHMEM_START=0xfe000000 > CONFIG_LOWMEM_SIZE=0x30000000 > CONFIG_KERNEL_START=0xc0000000 > CONFIG_TASK_SIZE=0x80000000 > CONFIG_BOOT_LOAD=0x00800000 > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=y > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_MAC_FLOPPY is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_UB is not set > # CONFIG_BLK_DEV_RAM is not set > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_INITRAMFS_SOURCE="" > # CONFIG_LBD is not set > # CONFIG_CDROM_PKTCDVD is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > CONFIG_BLK_DEV_IDEDISK=y > # CONFIG_IDEDISK_MULTI_MODE is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > CONFIG_BLK_DEV_IDEFLOPPY=y > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_IDE_GENERIC=y > CONFIG_BLK_DEV_IDEPCI=y > # CONFIG_IDEPCI_SHARE_IRQ is not set > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_SL82C105 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > # CONFIG_BLK_DEV_PIIX is not set > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > CONFIG_BLK_DEV_IDE_PMAC=y > CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y > CONFIG_BLK_DEV_IDEDMA_PMAC=y > # CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > CONFIG_SCSI=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > # CONFIG_CHR_DEV_SG is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI Transport Attributes > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_SCSI_SATA is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA2XXX=y > # CONFIG_SCSI_QLA21XX is not set > # CONFIG_SCSI_QLA22XX is not set > # CONFIG_SCSI_QLA2300 is not set > # CONFIG_SCSI_QLA2322 is not set > # CONFIG_SCSI_QLA6312 is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_SCSI_MESH is not set > # CONFIG_SCSI_MAC53C94 is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support > # > CONFIG_IEEE1394=y > > # > # Subsystem Options > # > # CONFIG_IEEE1394_VERBOSEDEBUG is not set > # CONFIG_IEEE1394_OUI_DB is not set > # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set > > # > # Device Drivers > # > # CONFIG_IEEE1394_PCILYNX is not set > # CONFIG_IEEE1394_OHCI1394 is not set > > # > # Protocol Drivers > # > # CONFIG_IEEE1394_SBP2 is not set > # CONFIG_IEEE1394_ETH1394 is not set > # CONFIG_IEEE1394_RAWIO is not set > # CONFIG_IEEE1394_CMP is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Macintosh device drivers > # > CONFIG_ADB=y > # CONFIG_ADB_CUDA is not set > CONFIG_ADB_PMU=y > # CONFIG_PMAC_PBOOK is not set > # CONFIG_PMAC_BACKLIGHT is not set > # CONFIG_ADB_MACIO is not set > CONFIG_INPUT_ADBHID=y > CONFIG_MAC_EMUMOUSEBTN=y > > # > # Networking support > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > CONFIG_NET_KEY=y > CONFIG_INET=y > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > CONFIG_INET_AH=y > CONFIG_INET_ESP=y > CONFIG_INET_IPCOMP=y > CONFIG_INET_TUNNEL=y > CONFIG_IP_TCPDIAG=y > # CONFIG_IP_TCPDIAG_IPV6 is not set > # CONFIG_IPV6 is not set > # CONFIG_NETFILTER is not set > CONFIG_XFRM=y > CONFIG_XFRM_USER=y > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > CONFIG_ATM=y > # CONFIG_ATM_CLIP is not set > # CONFIG_ATM_LANE is not set > # CONFIG_ATM_BR2684 is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > # CONFIG_NET_CLS_ROUTE is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_MII is not set > CONFIG_MACE=y > # CONFIG_MACE_AAUI_PORT is not set > # CONFIG_BMAC is not set > # CONFIG_HAPPYMEAL is not set > CONFIG_SUNGEM=y > # CONFIG_NET_VENDOR_3COM is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_HP100 is not set > # CONFIG_NET_PCI is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SKGE is not set > # CONFIG_SK98LIN is not set > # CONFIG_TIGON3 is not set > # CONFIG_BNX2 is not set > # CONFIG_MV643XX_ETH is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # ATM drivers > # > # CONFIG_ATM_TCP is not set > # CONFIG_ATM_LANAI is not set > # CONFIG_ATM_ENI is not set > # CONFIG_ATM_FIRESTREAM is not set > # CONFIG_ATM_ZATM is not set > # CONFIG_ATM_NICSTAR is not set > # CONFIG_ATM_IDT77252 is not set > # CONFIG_ATM_AMBASSADOR is not set > # CONFIG_ATM_HORIZON is not set > # CONFIG_ATM_IA is not set > # CONFIG_ATM_FORE200E_MAYBE is not set > # CONFIG_ATM_HE is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > CONFIG_PPP=y > # CONFIG_PPP_MULTILINK is not set > # CONFIG_PPP_FILTER is not set > CONFIG_PPP_ASYNC=y > CONFIG_PPP_SYNC_TTY=y > CONFIG_PPP_DEFLATE=y > # CONFIG_PPP_BSDCOMP is not set > # CONFIG_PPPOE is not set > CONFIG_PPPOATM=y > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > # CONFIG_INPUT_EVDEV is not set > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > # CONFIG_KEYBOARD_ATKBD is not set > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > # CONFIG_MOUSE_PS2 is not set > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > # CONFIG_SERIO is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > CONFIG_SERIAL_NONSTANDARD=y > # CONFIG_COMPUTONE is not set > # CONFIG_ROCKETPORT is not set > # CONFIG_CYCLADES is not set > # CONFIG_DIGIEPCA is not set > # CONFIG_MOXA_INTELLIO is not set > # CONFIG_MOXA_SMARTIO is not set > # CONFIG_ISI is not set > # CONFIG_SYNCLINK is not set > # CONFIG_SYNCLINKMP is not set > CONFIG_N_HDLC=y > # CONFIG_RISCOM8 is not set > # CONFIG_SPECIALIX is not set > # CONFIG_SX is not set > # CONFIG_RIO is not set > # CONFIG_STALDRV is not set > > # > # Serial drivers > # > # CONFIG_SERIAL_8250 is not set > > # > # Non-8250 serial port support > # > # CONFIG_SERIAL_PMACZILOG is not set > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > # CONFIG_LEGACY_PTYS is not set > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > CONFIG_NVRAM=y > # CONFIG_GEN_RTC is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_RAW_DRIVER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > > # > # I2C support > # > CONFIG_I2C=y > # CONFIG_I2C_CHARDEV is not set > > # > # I2C Algorithms > # > CONFIG_I2C_ALGOBIT=y > # CONFIG_I2C_ALGOPCF is not set > # CONFIG_I2C_ALGOPCA is not set > > # > # I2C Hardware Bus support > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI1563 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > # CONFIG_I2C_HYDRA is not set > # CONFIG_I2C_I801 is not set > # CONFIG_I2C_I810 is not set > # CONFIG_I2C_PIIX4 is not set > # CONFIG_I2C_ISA is not set > # CONFIG_I2C_KEYWEST is not set > # CONFIG_I2C_MPC is not set > # CONFIG_I2C_NFORCE2 is not set > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_PROSAVAGE is not set > # CONFIG_I2C_SAVAGE4 is not set > # CONFIG_SCx200_ACB is not set > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_VIA is not set > # CONFIG_I2C_VIAPRO is not set > # CONFIG_I2C_VOODOO3 is not set > # CONFIG_I2C_PCA_ISA is not set > > # > # Hardware Sensors Chip support > # > # CONFIG_I2C_SENSOR is not set > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ADM1025 is not set > # CONFIG_SENSORS_ADM1026 is not set > # CONFIG_SENSORS_ADM1031 is not set > # CONFIG_SENSORS_ASB100 is not set > # CONFIG_SENSORS_DS1621 is not set > # CONFIG_SENSORS_FSCHER is not set > # CONFIG_SENSORS_FSCPOS is not set > # CONFIG_SENSORS_GL518SM is not set > # CONFIG_SENSORS_GL520SM is not set > # CONFIG_SENSORS_IT87 is not set > # CONFIG_SENSORS_LM63 is not set > # CONFIG_SENSORS_LM75 is not set > # CONFIG_SENSORS_LM77 is not set > # CONFIG_SENSORS_LM78 is not set > # CONFIG_SENSORS_LM80 is not set > # CONFIG_SENSORS_LM83 is not set > # CONFIG_SENSORS_LM85 is not set > # CONFIG_SENSORS_LM87 is not set > # CONFIG_SENSORS_LM90 is not set > # CONFIG_SENSORS_LM92 is not set > # CONFIG_SENSORS_MAX1619 is not set > # CONFIG_SENSORS_PC87360 is not set > # CONFIG_SENSORS_SMSC47B397 is not set > # CONFIG_SENSORS_SIS5595 is not set > # CONFIG_SENSORS_SMSC47M1 is not set > # CONFIG_SENSORS_VIA686A is not set > # CONFIG_SENSORS_W83781D is not set > # CONFIG_SENSORS_W83L785TS is not set > # CONFIG_SENSORS_W83627HF is not set > > # > # Other I2C Chip support > # > # CONFIG_SENSORS_DS1337 is not set > # CONFIG_SENSORS_EEPROM is not set > # CONFIG_SENSORS_PCF8574 is not set > # CONFIG_SENSORS_PCF8591 is not set > # CONFIG_SENSORS_RTC8564 is not set > # CONFIG_SENSORS_M41T00 is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_I2C_DEBUG_CHIP is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Misc devices > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > CONFIG_FB=y > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > CONFIG_FB_SOFT_CURSOR=y > CONFIG_FB_MACMODES=y > CONFIG_FB_MODE_HELPERS=y > # CONFIG_FB_TILEBLITTING is not set > # CONFIG_FB_CIRRUS is not set > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > CONFIG_FB_OF=y > # CONFIG_FB_CONTROL is not set > # CONFIG_FB_PLATINUM is not set > # CONFIG_FB_VALKYRIE is not set > # CONFIG_FB_CT65550 is not set > # CONFIG_FB_ASILIANT is not set > # CONFIG_FB_IMSTT is not set > # CONFIG_FB_VGA16 is not set > # CONFIG_FB_NVIDIA is not set > CONFIG_FB_RIVA=y > CONFIG_FB_RIVA_I2C=y > # CONFIG_FB_RIVA_DEBUG is not set > # CONFIG_FB_MATROX is not set > # CONFIG_FB_RADEON_OLD is not set > # CONFIG_FB_RADEON is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_SAVAGE is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_S1D13XXX is not set > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > > # > # Logo configuration > # > CONFIG_LOGO=y > CONFIG_LOGO_LINUX_MONO=y > CONFIG_LOGO_LINUX_VGA16=y > CONFIG_LOGO_LINUX_CLUT224=y > # CONFIG_BACKLIGHT_LCD_SUPPORT is not set > # CONFIG_FB_SPLASH is not set > > # > # Speakup console speech > # > # CONFIG_SPEAKUP is not set > CONFIG_SPEAKUP_DEFAULT="none" > > # > # Sound > # > CONFIG_SOUND=y > CONFIG_DMASOUND_PMAC=y > CONFIG_DMASOUND=y > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=y > CONFIG_SND_TIMER=y > CONFIG_SND_PCM=y > # CONFIG_SND_SEQUENCER is not set > # CONFIG_SND_MIXER_OSS is not set > # CONFIG_SND_PCM_OSS is not set > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > # CONFIG_SND_DUMMY is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > > # > # PCI devices > # > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_ATIIXP is not set > # CONFIG_SND_ATIIXP_MODEM is not set > # CONFIG_SND_AU8810 is not set > # CONFIG_SND_AU8820 is not set > # CONFIG_SND_AU8830 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_BT87X is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_EMU10K1X is not set > # CONFIG_SND_CA0106 is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_MIXART is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_HDSP is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_FM801 is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > # CONFIG_SND_INTEL8X0 is not set > # CONFIG_SND_INTEL8X0M is not set > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VIA82XX_MODEM is not set > # CONFIG_SND_VX222 is not set > # CONFIG_SND_HDA_INTEL is not set > > # > # ALSA PowerMac devices > # > CONFIG_SND_POWERMAC=y > > # > # USB devices > # > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > # CONFIG_USB_EHCI_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > # CONFIG_USB_UHCI_HCD is not set > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_AUDIO is not set > # CONFIG_USB_BLUETOOTH_TTY is not set > # CONFIG_USB_MIDI is not set > CONFIG_USB_ACM=y > CONFIG_USB_PRINTER=y > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information > # > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > > # > # USB Input Devices > # > CONFIG_USB_HID=y > CONFIG_USB_HIDINPUT=y > # CONFIG_HID_FF is not set > # CONFIG_USB_HIDDEV is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > # CONFIG_USB_EGALAX is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Multimedia devices > # > # CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > # CONFIG_USB_MON is not set > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGETKIT is not set > # CONFIG_USB_PHIDGETSERVO is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_TEST is not set > > # > # USB ATM/DSL drivers > # > CONFIG_USB_ATM=y > CONFIG_USB_SPEEDTOUCH=y > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # InfiniBand support > # > # CONFIG_INFINIBAND is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > CONFIG_EXT3_FS=y > # CONFIG_EXT3_FS_XATTR is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > > # > # XFS support > # > # CONFIG_XFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > # CONFIG_JOLIET is not set > # CONFIG_ZISOFS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > # CONFIG_MSDOS_FS is not set > # CONFIG_VFAT_FS is not set > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > # CONFIG_PROC_KCORE is not set > CONFIG_SYSFS=y > # CONFIG_DEVFS_FS is not set > # CONFIG_DEVPTS_FS_XATTR is not set > # CONFIG_TMPFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > CONFIG_HFS_FS=y > CONFIG_HFSPLUS_FS=y > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_SQUASHFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > # CONFIG_NFS_FS is not set > # CONFIG_NFSD is not set > # CONFIG_SMB_FS is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ASCII is not set > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > CONFIG_NLS_ISO8859_15=y > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=y > > # > # Library routines > # > CONFIG_CRC_CCITT=y > CONFIG_CRC32=y > # CONFIG_LIBCRC32C is not set > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=y > > # > # Profiling support > # > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > # CONFIG_DEBUG_KERNEL is not set > CONFIG_LOG_BUF_SHIFT=14 > CONFIG_BOOTX_TEXT=y > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > CONFIG_CRYPTO_HMAC=y > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=y > CONFIG_CRYPTO_SHA1=y > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > # CONFIG_CRYPTO_TGR192 is not set > CONFIG_CRYPTO_DES=y > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_AES is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > CONFIG_CRYPTO_DEFLATE=y > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > > > ## yaboot.conf generated by yabootconfig 1.0.8 > ## > ## run: "man yaboot.conf" for details. Do not make changes until you have!! > ## > ## For a dual-boot menu, add one or more of: > ## bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ > > boot=/dev/hda12 > device=hd: > ofboot=hd:12 > delay=15 > timeout=30 > macos=hd:10 > macosx=hd:11 > defaultos=macosx > default=Linux > install=/usr/lib/yaboot/yaboot > magicboot=/usr/lib/yaboot/ofboot > enablecdboot > enableofboot > > image=/boot/Linux > label=Linux > root=/dev/hda15 > partition=15 > sysmap=/boot/Sysmap > read-only > > >
-- !sic transit gloria mundi! (+351) 966 014 174 -- gentoo-ppc-user@g.o mailing list

Replies

Subject Author
Re: [gentoo-ppc-user] Compile error on IDE Power Mac driver Charles Trois <charles.trois@×××××××.fr>