1 |
The 2.6.17 kernel hangs right after it attempts to switch video modes - |
2 |
it just sits there with the following: |
3 |
|
4 |
Console: switching to mono PROM 80x34 |
5 |
Real Time Clock Driver v1.12ac |
6 |
atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27] |
7 |
atyfb: 8M SGRAM (1:1), 29.498928 MHz XTAL, 230 MHz PPL, 83 Mhz MCLK, 63 |
8 |
MHz XCLK |
9 |
|
10 |
I thought I had boot the 2617 kernel before on this system from the |
11 |
same CD - I've tried both universal and minimal install CD with the |
12 |
same results. |
13 |
|
14 |
Not sure why. Otherwise, I would have provided the dmesg output from it |
15 |
too. |
16 |
|
17 |
Ben |
18 |
|
19 |
--- Pablo Andrés Martikian <pablomartikian@×××××××.com> wrote: |
20 |
|
21 |
> |
22 |
> To install the 2007.0 cd you have two kernels. You selected 2.6.20 |
23 |
> when in fact you should do [TAB] and select the 2.6.17 |
24 |
> |
25 |
> Pablo |
26 |
> |
27 |
> ---------------------------------------- |
28 |
> > Date: Tue, 18 Mar 2008 08:21:05 -0700 |
29 |
> > From: bm_witness@×××××.com |
30 |
> > Subject: Re: [gentoo-sparc] QLA2xxx |
31 |
> > To: gentoo-sparc@l.g.o |
32 |
> > |
33 |
> > I started trying to work on the system; however, we ran into a few |
34 |
> > problems with it. I haven't been able to get the 2007.0 CD working |
35 |
> > because of the aforementioned issue - it also doesn't list an |
36 |
> obppath, |
37 |
> > loading, or data files for the QLA controller under /sys/devices - |
38 |
> so |
39 |
> > following the instructions previously provided is impossible. :-< |
40 |
> > |
41 |
> > I have located the device: |
42 |
> > |
43 |
> > /sys/devices/pci0000\:00/0000\:00\:04.0 |
44 |
> > |
45 |
> > uDev is on the 2007.0 CD, and loads the module, but has problems. |
46 |
> > Here's the dmesg output from the 2007.0 CD using the 2.6.20 kernel: |
47 |
> > |
48 |
> > http://tinyurl.com/2l2zw4 |
49 |
> > |
50 |
> > I also managed to find the CD I used on another system - a 2006.1 |
51 |
> CD. |
52 |
> > It boots and detects the QLA controller just fine - but uses the |
53 |
> older |
54 |
> > method where the firmware is built into the kernel. However, it is |
55 |
> > unable to spin up the hard drive for some reason - it does detect |
56 |
> it. |
57 |
> > Here's the dmesg output from the 2006.1 CD using the 2.6.17 kernel: |
58 |
> > |
59 |
> > http://tinyurl.com/3ck8t7 |
60 |
> > |
61 |
> > Any tips? Is the hard drive bad? I'm not sure where to go from |
62 |
> here, |
63 |
> > and I need to get this at least with the basic OS on it before the |
64 |
> > 29th. |
65 |
> > |
66 |
> > TIA, |
67 |
> > |
68 |
> > Ben |
69 |
> > -- |
70 |
> > gentoo-sparc@l.g.o mailing list |
71 |
> > |
72 |
> |
73 |
> _________________________________________________________________ |
74 |
> Express yourself instantly with MSN Messenger! Download today it's |
75 |
> FREE! |
76 |
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/-- |
77 |
> gentoo-sparc@l.g.o mailing list |
78 |
> |
79 |
> |
80 |
|
81 |
-- |
82 |
gentoo-sparc@l.g.o mailing list |