| 1 |
зайди по ssh и запусти иксы. Что напишет? |
| 2 |
|
| 3 |
----- Исходное сообщение ----- |
| 4 |
> Добрый День |
| 5 |
> |
| 6 |
> после обновления до ~x86 не могу запустить Xorg. Система виснет намертво - |
| 7 |
> помогает только хард резет, после ребута логов нет... |
| 8 |
> |
| 9 |
> пробовал разные ядра, конфиги для Xorg, и без конфига... |
| 10 |
> |
| 11 |
> |
| 12 |
> как понять из-за чего висяк? |
| 13 |
> |
| 14 |
> |
| 15 |
> |
| 16 |
> |
| 17 |
> |
| 18 |
> =============================================================== |
| 19 |
> uname -a |
| 20 |
> =============================================================== |
| 21 |
> Linux Fujik 2.6.32-gentoo-r2-fujik #3 PREEMPT Fri Jan 22 09:52:24 MSK 2010 |
| 22 |
> i686 Intel(R) Pentium(R) M processor 1.20GHz GenuineIntel GNU/Linux |
| 23 |
> |
| 24 |
> |
| 25 |
> =============================================================== |
| 26 |
> cat /etc/X11/xorg.conf |
| 27 |
> =============================================================== |
| 28 |
> Section "ServerLayout" |
| 29 |
> Identifier "X.org Configured" |
| 30 |
> Screen 0 "Screen0" 0 0 |
| 31 |
> # InputDevice "Touchpad" "SendCoreEvents" |
| 32 |
> InputDevice "Mouse0" "CorePointer" |
| 33 |
> InputDevice "Keyboard0" "CoreKeyboard" |
| 34 |
> EndSection |
| 35 |
> |
| 36 |
> Section "ServerFlags" |
| 37 |
> # "AllowEmptyInput" "False" |
| 38 |
> Option "AllowEmptyInput" "off" |
| 39 |
> EndSection |
| 40 |
> |
| 41 |
> Section "Files" |
| 42 |
> ModulePath "/usr/lib/xorg/modules" |
| 43 |
> FontPath "/usr/share/fonts/misc:unscaled" |
| 44 |
> FontPath "/usr/share/fonts/Type1" |
| 45 |
> FontPath "/usr/share/fonts/TTF" |
| 46 |
> FontPath "/usr/share/fonts/corefonts" |
| 47 |
> FontPath "/usr/share/fonts/freefonts" |
| 48 |
> FontPath "/usr/share/fonts/terminus" |
| 49 |
> FontPath "/usr/share/fonts/ttf-bitstream-vera" |
| 50 |
> FontPath "/usr/share/fonts/unifont" |
| 51 |
> FontPath "/usr/share/fonts/75dpi:unscaled" |
| 52 |
> FontPath "/usr/share/fonts/100dpi:unscaled" |
| 53 |
> FontPath "/usr/share/fonts/artwiz" |
| 54 |
> EndSection |
| 55 |
> |
| 56 |
> Section "Module" |
| 57 |
> # Load "dbe" |
| 58 |
> # Load "glx" |
| 59 |
> # Load "extmod" |
| 60 |
> # Load "record" |
| 61 |
> # Load "dri2" |
| 62 |
> # Load "dri" |
| 63 |
> EndSection |
| 64 |
> |
| 65 |
> Section "InputDevice" |
| 66 |
> Identifier "Keyboard0" |
| 67 |
> Driver "kbd" |
| 68 |
> EndSection |
| 69 |
> |
| 70 |
> Section "InputDevice" |
| 71 |
> Identifier "Mouse0" |
| 72 |
> Driver "mouse" |
| 73 |
> Option "Protocol" "auto" |
| 74 |
> Option "Device" "/dev/input/mice" |
| 75 |
> Option "ZAxisMapping" "4 5 6 7" |
| 76 |
> EndSection |
| 77 |
> |
| 78 |
> Section "Monitor" |
| 79 |
> Identifier "Monitor0" |
| 80 |
> VendorName "Monitor Vendor" |
| 81 |
> ModelName "Monitor Model" |
| 82 |
> # Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841 |
| 83 |
> EndSection |
| 84 |
> |
| 85 |
> |
| 86 |
> Section "Device" |
| 87 |
> Identifier "Card0" |
| 88 |
> Driver "intel" |
| 89 |
> VendorName "Intel Corporation" |
| 90 |
> BoardName "82852/855GM Integrated Graphics Device" |
| 91 |
> BusID "PCI:0:2:0" |
| 92 |
> # from http://en.gentoo-wiki.com/wiki/Intel_GMA |
| 93 |
> Option "AccelMethod" "UXA" |
| 94 |
> Option "Tiling" "False" |
| 95 |
> # lspci -vv |
| 96 |
> # Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] |
| 97 |
> # Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K] |
| 98 |
> # 128M * 1024 - 512K = 131072K - 512K = 130560K |
| 99 |
> VideoRam 130560 |
| 100 |
> EndSection |
| 101 |
> |
| 102 |
> Section "Screen" |
| 103 |
> Identifier "Screen0" |
| 104 |
> Device "Card0" |
| 105 |
> Monitor "Monitor0" |
| 106 |
> SubSection "Display" |
| 107 |
> Viewport 0 0 |
| 108 |
> Depth 24 |
| 109 |
> # Modes 1280x800 |
| 110 |
> EndSubSection |
| 111 |
> EndSection |
| 112 |
> |
| 113 |
> |
| 114 |
> Section "DRI" |
| 115 |
> Mode 0666 |
| 116 |
> EndSection |
| 117 |
> |
| 118 |
> =============================================================== |
| 119 |
> железо Fujitsu-Siemens LIFEBOOK P7010: |
| 120 |
> =============================================================== |
| 121 |
> |
| 122 |
> 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated |
| 123 |
> Graphics Device (rev 02) (prog-if 00 [VGA controller]) |
| 124 |
> Subsystem: Fujitsu Limited. Device 1282 |
| 125 |
> Control: I/O+ Mem+ |
| 126 |
> BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- |
| 127 |
> DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- |
| 128 |
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
| 129 |
> Latency: 0 |
| 130 |
> Interrupt: pin A |
| 131 |
> routed to IRQ 11 |
| 132 |
> Region 0: Memory at d8000000 (32-bit, |
| 133 |
> prefetchable) [size=128M] |
| 134 |
> Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K] |
| 135 |
> Region 2: I/O |
| 136 |
> ports at 2450 [size=8] |
| 137 |
> Expansion ROM at <unassigned> [disabled] |
| 138 |
> |
| 139 |
> Capabilities: [d0] Power Management version 1 |
| 140 |
> Flags: PMEClk- |
| 141 |
> DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) |
| 142 |
> Status: D0 NoSoftRst- PME-Enable- DSel=0 |
| 143 |
> DScale=0 PME- |
| 144 |
> Kernel modules: i915 |
| 145 |
> |
| 146 |
> |
| 147 |
> =============================================================== |
| 148 |
> cat /var/log/Xorg.0.log (не актуален, не обновляется после ребута!! привожу |
| 149 |
> только, чтоб показать версию xorg) |
| 150 |
> =============================================================== |
| 151 |
> |
| 152 |
> X.Org X Server 1.7.4 |
| 153 |
> Release Date: 2010-01-08 |
| 154 |
> X Protocol Version 11, Revision 0 |
| 155 |
> Build Operating System: Linux 2.6.32-gentoo-r2-fujik i686 |
| 156 |
> Current Operating System: Linux Fujik 2.6.32-gentoo-r2-fujik #3 PREEMPT Fri |
| 157 |
> Jan 22 09:52:24 MSK 2010 i686 |
| 158 |
> Kernel command line: root=/dev/ram0 real_root=LABEL=ROOT crypt_root=/dev/sda3 |
| 159 |
> i915.modeset=0 |
| 160 |
> Build Date: 20 January 2010 04:15:16AM |
| 161 |
> |
| 162 |
> Current version of pixman: 0.17.2 |
| 163 |
> Before reporting problems, check http://wiki.x.org |
| 164 |
> to make sure that you have the latest version. |
| 165 |
> Markers: (--) probed, (**) from config file, (==) default setting, |
| 166 |
> (++) from command line, (!!) notice, (II) informational, |
| 167 |
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. |
| 168 |
> (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 22 10:55:11 2010 |
| 169 |
> (==) Using config file: "/etc/X11/xorg.conf" |
| 170 |
> Parse error on line 99 of section Device in file /etc/X11/xorg.conf |
| 171 |
> The VideoRam keyword requires a number to follow it. |
| 172 |
> (EE) Problem parsing the config file |
| 173 |
> (EE) Error parsing the config file |
| 174 |
> |
| 175 |
> Fatal server error: |
| 176 |
> no screens found |
| 177 |
> |
| 178 |
> Please consult the The X.Org Foundation support |
| 179 |
> at http://wiki.x.org |
| 180 |
> for help. |
| 181 |
> Please also check the log file at "/var/log/Xorg.0.log" for additional |
| 182 |
> information. |
| 183 |
> |
| 184 |
> (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor |
| 185 |
> (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor |
| 186 |
> |
| 187 |
> |
Archives