Re: [gentoo-user-ru] система виснет при запуске Xorg

[Alexander Kuprijanov]

при запуске через SSH пишет...

startx
xauth:  creating new authority file /home/sanya/.serverauth.4271
xauth:  creating new authority file /home/sanya/.Xauthority
xauth:  creating new authority file /home/sanya/.Xauthority


X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-gentoo-r2-fujik i686
Current Operating System: Linux Fujik 2.6.32-gentoo-r2-fujik #3 PREEMPT Fri 
Jan 22 09:52:24 MSK 2010 i686
Kernel command line: root=/dev/ram0 real_root=LABEL=ROOT crypt_root=/dev/sda3 
i915.modeset=0
Build Date: 24 January 2010  08:59:23PM

Current version of pixman: 0.17.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 25 11:39:54 2010
(==) Using config file: "/etc/X11/xorg.conf"



тут все зависает...
после перезагрузки ничего нового в /var/* не появляется.. :(





В сообщении от Friday 22 January 2010 19:46:04 Maxim написал(а):
> зайди по ssh и запусти иксы. Что напишет?
>
> ----- Исходное сообщение -----
>
> > Добрый День
> >
> > после обновления до ~x86 не могу запустить Xorg. Система виснет намертво
> > - помогает только хард резет, после ребута логов нет...
> >
> > пробовал разные ядра, конфиги для Xorg, и без конфига...
> >
> >
> > как понять из-за чего висяк?
> >
> >
> >
> >
> >
> > ===============================================================
> > uname -a
> > ===============================================================
> > Linux Fujik 2.6.32-gentoo-r2-fujik #3 PREEMPT Fri Jan 22 09:52:24 MSK
> > 2010 i686 Intel(R) Pentium(R) M processor 1.20GHz GenuineIntel GNU/Linux
> >
> >
> > ===============================================================
> > cat /etc/X11/xorg.conf
> > ===============================================================
> > Section "ServerLayout"
> >        Identifier    "X.org Configured"
> >        Screen      0  "Screen0" 0 0
> > #      InputDevice    "Touchpad" "SendCoreEvents"
> >        InputDevice    "Mouse0" "CorePointer"
> >        InputDevice    "Keyboard0" "CoreKeyboard"
> > EndSection
> >
> > Section "ServerFlags"
> > #      "AllowEmptyInput" "False"
> >        Option      "AllowEmptyInput" "off"
> > EndSection
> >
> > Section "Files"
> >        ModulePath  "/usr/lib/xorg/modules"
> >        FontPath    "/usr/share/fonts/misc:unscaled"
> >        FontPath    "/usr/share/fonts/Type1"
> >        FontPath    "/usr/share/fonts/TTF"
> >        FontPath    "/usr/share/fonts/corefonts"
> >        FontPath    "/usr/share/fonts/freefonts"
> >        FontPath    "/usr/share/fonts/terminus"
> >        FontPath    "/usr/share/fonts/ttf-bitstream-vera"
> >        FontPath    "/usr/share/fonts/unifont"
> >        FontPath    "/usr/share/fonts/75dpi:unscaled"
> >        FontPath    "/usr/share/fonts/100dpi:unscaled"
> >        FontPath    "/usr/share/fonts/artwiz"
> > EndSection
> >
> > Section "Module"
> > #      Load  "dbe"
> > #      Load  "glx"
> > #      Load  "extmod"
> > #      Load  "record"
> > #      Load  "dri2"
> > #      Load  "dri"
> > EndSection
> >
> > Section "InputDevice"
> >        Identifier  "Keyboard0"
> >        Driver      "kbd"
> > EndSection
> >
> > Section "InputDevice"
> >        Identifier  "Mouse0"
> >        Driver      "mouse"
> >        Option      "Protocol" "auto"
> >        Option      "Device" "/dev/input/mice"
> >        Option      "ZAxisMapping" "4 5 6 7"
> > EndSection
> >
> > Section "Monitor"
> >        Identifier  "Monitor0"
> >        VendorName  "Monitor Vendor"
> >        ModelName    "Monitor Model"
> > #      Modeline    "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824
> > 841 EndSection
> >
> > Section "Device"
> >        Identifier  "Card0"
> >        Driver      "intel"
> >        VendorName  "Intel Corporation"
> >        BoardName  "82852/855GM Integrated Graphics Device"
> >        BusID      "PCI:0:2:0"
> >        # from http://en.gentoo-wiki.com/wiki/Intel_GMA
> >        Option      "AccelMethod" "UXA"
> >        Option      "Tiling"      "False"
> >        # lspci -vv
> >        # Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
> >        # Region 1: Memory at d0000000 (32-bit, non-prefetchable)
> > [size=512K] # 128M * 1024 - 512K = 131072K - 512K = 130560K
> >        VideoRam    130560
> > EndSection
> >
> > Section "Screen"
> >        Identifier "Screen0"
> >        Device    "Card0"
> >        Monitor    "Monitor0"
> >        SubSection "Display"
> >                Viewport  0 0
> >                Depth    24
> > #              Modes    1280x800
> >        EndSubSection
> > EndSection
> >
> >
> > Section "DRI"
> >        Mode 0666
> > EndSection
> >
> > ===============================================================
> > железо Fujitsu-Siemens LIFEBOOK P7010:
> > ===============================================================
> >
> > 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
> > Integrated Graphics Device (rev 02) (prog-if 00 [VGA controller])
> >        Subsystem: Fujitsu Limited. Device 1282
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx-                              Status:
> > Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-  <TAbort- <MAbort-
> > >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region
> > 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory
> > at d0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at
> > 2450 [size=8] Expansion ROM at <unassigned> [disabled]  Capabilities:
> > [d0] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2-
> > AuxCurrent=0mA  PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst-
> > PME-Enable- DSel=0 DScale=0 PME- Kernel modules: i915
> >
> > ===============================================================
> > cat /var/log/Xorg.0.log (не актуален, не обновляется после ребута!!
> > привожу только, чтоб показать версию xorg)
> > ===============================================================
> >
> > X.Org X Server 1.7.4
> > Release Date: 2010-01-08
> > X Protocol Version 11, Revision 0
> > Build Operating System: Linux 2.6.32-gentoo-r2-fujik i686
> > Current Operating System: Linux Fujik 2.6.32-gentoo-r2-fujik #3 PREEMPT
> > Fri Jan 22 09:52:24 MSK 2010 i686
> > Kernel command line: root=/dev/ram0 real_root=LABEL=ROOT
> > crypt_root=/dev/sda3 i915.modeset=0
> > Build Date: 20 January 2010  04:15:16AM
> >
> > Current version of pixman: 0.17.2
> >        Before reporting problems, check http://wiki.x.org
> >        to make sure that you have the latest version.
> > Markers: (--) probed, (**) from config file, (==) default setting,
> >        (++) from command line, (!!) notice, (II) informational,
> >        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 22 10:55:11 2010
> > (==) Using config file: "/etc/X11/xorg.conf"
> > Parse error on line 99 of section Device in file /etc/X11/xorg.conf
> >        The VideoRam keyword requires a number to follow it.
> > (EE) Problem parsing the config file
> > (EE) Error parsing the config file
> >
> > Fatal server error:
> > no screens found
> >
> > Please consult the The X.Org Foundation support
> >          at http://wiki.x.org
> >  for help.
> > Please also check the log file at "/var/log/Xorg.0.log" for additional
> > information.
> >
> > (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
> > (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
>