1 |
I can't actually send from the machine so its hard to include stuff. I'm |
2 |
not looking for a solution, just things to try. |
3 |
|
4 |
I'm on kernel 4.9.16-gentoo |
5 |
GPU is Turks XT (Radeon HD 6500/7670) |
6 |
Kernel is setup according to the gentoo radeon guide, I compared it to |
7 |
4.4.6 kernel, which has been working for months. Booting off that older |
8 |
kernel doesn't change anything, so it can't be the kernel. |
9 |
|
10 |
These are a manual transcript of selected Xorg.0.log errors |
11 |
open /dev/dri/card0: No such file or directory |
12 |
Device (s) detected, but none match those in config file |
13 |
|
14 |
The /dev/dri directory does not exist. If it's created by udev, maybe I |
15 |
have a udev problem? |
16 |
|
17 |
|
18 |
On 31 May 2017 4:29 PM, "Thanasis" <thanasis@××××××××××.org> wrote: |
19 |
|
20 |
On 05/31/2017 07:29 AM, Daiajo Tibdixious wrote: |
21 |
> For a while now I've been logging into root & doing "modprobe radeon" |
22 |
> after which the screen will blank, then come back at a much higher |
23 |
> resolution. (as an aside, where do I put modules to autoload?) Since the |
24 |
> last reboot nothing happens. SDDM/KDE will not start. |
25 |
> |
26 |
> I have checked all the radeon settings in the kernel, & tried booting |
27 |
> off a previous kernel with no change. |
28 |
> |
29 |
> If I login to my user account & do "startx" that also fails. |
30 |
> |
31 |
> I took the cover off the machine & the GPU fan is spinning. It's dusty |
32 |
> but not too bad. |
33 |
> |
34 |
> I've run out of ideas. To me it looks like a HW fault but I don't know |
35 |
> how to check the GPU. It's still visible in lspci & console mode works |
36 |
> (with tiny # lines & width). |
37 |
> |
38 |
> (IDK if this will be text or html, the setting is not visible on phone) |
39 |
|
40 |
Are you expecting people here to guess your hardware configuration, |
41 |
kernel configuration, debug messages, etc? |