| 1 |
I'll redo my setup @Work (Currently testing FreeBSD), but yes, |
| 2 |
I had Linux running a 2450 WITH the PERC 3Si (And I even played |
| 3 |
with the raid software available on Dell's sight to see the |
| 4 |
drives etc. :) |
| 5 |
|
| 6 |
Hendrik |
| 7 |
|
| 8 |
On Fri, Jul 27, 2001 at 01:34:41PM -0400, joe.derosa.b1@×××××.com wrote: |
| 9 |
> After doing some poking around, |
| 10 |
> None of the modules (including megaraid) detect any hardware. |
| 11 |
> It appears that the embedded controller is a 7899 dual channel controller, that |
| 12 |
> can have one channel use hardware raid. The bios banner calls the controller a |
| 13 |
> "Power Edge Expandable 3/Si Bios 2.5-0". If I disable raid, the drives all show |
| 14 |
> up as individual drives on the 7899 channel A using the AIC7xxx controller. |
| 15 |
> Reading in the kernel source, a couple of the drivers (old an new AIC7xxx) |
| 16 |
> mention that then specifically don't work with the hardware raid controller, but |
| 17 |
> none of them say they do. So, I can get the drives to work by disabling raid, |
| 18 |
> or moving to channel B, but I would like the hardware raid for speed. |
| 19 |
> |
| 20 |
> Thanks!! |
| 21 |
> |
| 22 |
> |
| 23 |
> Joe DeRosa |
| 24 |
> |
| 25 |
> |
| 26 |
> |
| 27 |
> _______________________________________________ |
| 28 |
> gentoo-dev mailing list |
| 29 |
> gentoo-dev@××××××××××.org |
| 30 |
> http://cvs.gentoo.org/mailman/listinfo/gentoo-dev |
| 31 |
|
| 32 |
-- |
| 33 |
------------------------ |
| 34 |
Hendrik Visage |
| 35 |
hvisage@×××××××××××.za |
Archives